Surface singularity and crack propagation
References (25)
State of stress at the vertex of a quarter-infinite crack in a half-space
Int. J. Solids Structures
(1977)Three-dimensional harmonic functions near termination or intersection or gradient singularity lines: A general numerical method
Int. J. Engng Sci.
(1974)- et al.
Singularities of elastic stresses and of harmonic functions at conical notches and inclusions
Int. J. Solids Structures
(1974) - et al.
Elastodynamic near-tip fields for a crack propagating along the interface of two orthotropic solids
Int. J. Engng Sci.
(1976) Fundamentals of Fracture Mechanics
(1973)The interface crack
Trans. ASME (Ser. E), J. Appl. Mech.
(1977)- et al.
Analysis of Singularity at the Root of the Surface Crack Problem
On the three-dimensional theory of cracked plates
Trans. ASME (Ser. E), J. Appl. Mech.
(1975)- et al.
General Numerical Method for Three-Dimensional Singularities in Cracked or Notched Elastic Solids
- et al.
Elastodynamic near-tip stress and displacement fields for rapidly propagating cracks in orthotropic materials
Trans. ASME (Ser. E), J. Appl Mech.
(1975)
Charge singularity at the corner of a flat plate
SIAM, J. Appl. Math.
(1976)
Singularity at the corner of a wedge-shaped punch or crack
SIAM J. Appl. Math.
(1978)
Quart. Appl. Math.
(1977)
Cited by (402)
Effect of support friction on pure mode I, II, and III fracture toughness of cement concrete tested with edge-notched disc bend specimen
2024, Theoretical and Applied Fracture MechanicsCrack-parallel stress effect on fracture energy of plastic hardening polycrystalline metal identified from gap test scaling
2023, Journal of the Mechanics and Physics of SolidsStress intensity factors of rectangular shape cracks for crack growth prediction
2023, International Journal of Pressure Vessels and PipingKey role of boundary conditions for the 2D modeling of crack propagation in linear elastic Compact Tension tests
2023, Engineering Fracture MechanicsA novel analysis of stress intensity factors for distributed non-planar surface cracks and its application to material quality control
2022, Theoretical and Applied Fracture MechanicsCitation Excerpt :This study advances the numerical analysis of SIFs for multiple non-planar, semi-elliptical cracks that were distributed on the surface of a semi-infinite elastic body under arbitrary loading conditions. The eigenstrain method adopted for the investigation is based on the technique of distributing infinitesimal dislocation loops (IDLs) on the crack surfaces in order to satisfy their respective boundary conditions [43–46]. This formulation led to a set of 2-D, hyper-singular integral equations.
- †
Professor.
Copyright © 1979 Published by Elsevier Ltd.