Short communicationElectrochemical mass transfer in an annulus
References (8)
- et al.
Electrochim. Acta
(1974) - et al.
Electrochim. Acta
(1965) - et al.
Electrochim. Acta
(1967) - et al.
Electrochim. Acta
(1968)
There are more references available in the full text version of this article.
Cited by (15)
Mass transfer at a rotating tubular packed bed of woven screens in relation to electrochemical and catalytic reactor design
2015, International Journal of Heat and Mass TransferExperimental and theoretical investigation of supercritical drying of silica alcogels
2015, Journal of Supercritical FluidsCitation Excerpt :Stüber et al. [18] correlated their mass transfer data for estimation of external, particle-to-fluid mass transfer coefficients of 1,2-dichlorobenzene and toluene in scCO2 in sintered metallic pellets as inert solid packings. Correlations developed by Carbin and Gabe [23] and Ross and Wragg [25] for electrochemical mass transfer under fully developed laminar flow in annuli were also used. Carbin and Gabe measured the mass transfer rate by measuring limiting currents for the deposition of Cu++ from acidified solutions of CuSO4 on to copper cathodes.
Mass and heat transfer behavior of a rough vertical vibrating cylinder in relation to annular electrochemical and catalytic reactor design
2014, International Journal of Heat and Mass TransferElectrochemical mass transfer at a heated electrode in a vertical annular flow cell
2004, Chemical Engineering and Processing: Process IntensificationNumerical and experimental study of mass and momentum transfer in developing laminar flow in annulus
1995, International Journal of Heat and Mass Transfer
- 1
Present address: Torday Ltd., North Shields.
- 2
Present address: University of Technology, Loughborough LE11 3TU.
Copyright © 1974 Published by Elsevier Ltd.