Plan
Comptes Rendus

Synthesis of 1,2-azidoalcohols from epoxides using a task-specific protic ionic liquid: 1-hydrogen-3-methylimidazolium azide
Comptes Rendus. Chimie, Volume 17 (2014) no. 5, pp. 450-453.

Résumé

A task-specific ionic liquid as an environmentally eco-friendly green catalyst has been synthesized and used in the ring opening of epoxides under green conditions. In order to use protic ionic liquids (PIL), we decided to synthesize 1,2-azidoalcohols via a ring opening reaction of epoxides with 1-hydrogen-3-methylimidazolium azide ([Hmim]N3), which actually acts as a solvent, a reagent and an activator of the epoxide ring. The reaction was carried out in short times (50–70 min) at 70 °C to give 1,2-azidoalcohol in 80–94% isolated yields.

Métadonnées
Reçu le :
Accepté le :
Publié le :
DOI : 10.1016/j.crci.2013.08.008
Mots clés : Protic ionic liquid, Ionic liquid, [Hmim]N3: 1, 2-azidoalcohol, Epoxide, Ring opening

Fariba Heidarizadeh 1 ; Ali BeitSaeed 1 ; Eshagh Rezaee-Nezhad 1

1 Department of Chemistry, Faculty of Sciences, Shahid Chamran University, Ahvaz 6135743169, Iran
@article{CRCHIM_2014__17_5_450_0,
     author = {Fariba Heidarizadeh and Ali BeitSaeed and Eshagh Rezaee-Nezhad},
     title = {Synthesis of 1,2-azidoalcohols from epoxides using a task-specific protic ionic liquid: 1-hydrogen-3-methylimidazolium azide},
     journal = {Comptes Rendus. Chimie},
     pages = {450--453},
     publisher = {Elsevier},
     volume = {17},
     number = {5},
     year = {2014},
     doi = {10.1016/j.crci.2013.08.008},
     language = {en},
}
TY  - JOUR
AU  - Fariba Heidarizadeh
AU  - Ali BeitSaeed
AU  - Eshagh Rezaee-Nezhad
TI  - Synthesis of 1,2-azidoalcohols from epoxides using a task-specific protic ionic liquid: 1-hydrogen-3-methylimidazolium azide
JO  - Comptes Rendus. Chimie
PY  - 2014
SP  - 450
EP  - 453
VL  - 17
IS  - 5
PB  - Elsevier
DO  - 10.1016/j.crci.2013.08.008
LA  - en
ID  - CRCHIM_2014__17_5_450_0
ER  - 
%0 Journal Article
%A Fariba Heidarizadeh
%A Ali BeitSaeed
%A Eshagh Rezaee-Nezhad
%T Synthesis of 1,2-azidoalcohols from epoxides using a task-specific protic ionic liquid: 1-hydrogen-3-methylimidazolium azide
%J Comptes Rendus. Chimie
%D 2014
%P 450-453
%V 17
%N 5
%I Elsevier
%R 10.1016/j.crci.2013.08.008
%G en
%F CRCHIM_2014__17_5_450_0
Fariba Heidarizadeh; Ali BeitSaeed; Eshagh Rezaee-Nezhad. Synthesis of 1,2-azidoalcohols from epoxides using a task-specific protic ionic liquid: 1-hydrogen-3-methylimidazolium azide. Comptes Rendus. Chimie, Volume 17 (2014) no. 5, pp. 450-453. doi : 10.1016/j.crci.2013.08.008. https://comptes-rendus.academie-sciences.fr/chimie/articles/10.1016/j.crci.2013.08.008/

Version originale du texte intégral

1 Introduction

1,2-azidoalcohol has been considered increasingly, since this compound is very important in both organic chemistry – for the synthesis of amino sugars, carboxylic nucleosides, lactames, and oxazolines [1]– and in medical chemistry – for the synthesis of β-blockers and its presence in various natural products and different bioactive compounds [2–4]. The ring opening of epoxides, which have been innovative ways to obtain direct azidolysis of epoxides in the presence of sodium azide, are frequently performed under several different conditions [5–9].

The ring cleavage of epoxides with azide [10–14] generally requires a long reaction time (12–48 h) and is often accompanied by isomerization, epimerization, rearrangement of the products [15], and tedious work-up. In order to overcome some of these limitations, a number of alternative procedures have been reported over the past few years using a variety of catalysts [6]. But development of a new and efficient protocol for this transformation under mild and more convenient conditions is still needed.

Herein we report an efficient method for the conversion of epoxides to 1,2-azidoalcohols. In this method we used a triple-function protic ionic liquid that contains an azide nucleophile for ring opening of epoxides. Various aliphatic and aromatic epoxides were converted into their azidoalcohols derivatives in excellent yields and in short time (Scheme 1).

Scheme 1

Preparation of azidohydrines in the presence of TSIL.

PILs are a class of ionic liquids which are formed by mixing equimolar amounts of Brønsted acids and bases [16,6]. The strength of the acid/base combination determines the degree of the proton activity.

Recently, Welton et al. described the conversion of biomass to fuels and chemical products by ionic liquids [17]. On the other hand, Wasserscheid et al. studied the surface and the near-surface region of ionic liquid systems with a clear focus on reactions [18]. Finally, Davis Jr. et al. reported, for the first time, task-specific ionic liquids [19], non-toxic ions in the formulation of ionic liquids [20], and “boronium-ion”-based ionic liquids [21].

2 Results and discussion

Task-specific protic ionic liquids combine the advantageous characteristics of solid acids and mineral acids, and can be good candidates for traditional mineral liquid acids, such as sulfuric acid and hydrochloric acid, in chemical processes [22,23]. Thus, as a part of our continuing interest in the development of clean chemical processes, we synthesized a task-specific protic ionic liquid, [Hmim]N3. This ionic liquid has an acidic hydrogen that catalyzes the reaction and has an azide anion that takes part in the reaction. In this process, the remaining part of [Hmim]N3 is methylimidazole, which can be used in the preparation of any other ionic liquids without any more purification, and this is in agreement with the atomic economy of green chemistry principles. We believe that this paper is the first report of this kind of task-specific protic ionic liquid.

In a typical experiment, phenyl glycidyl ether and [Hmim]N3 was selected. The effect of the amount of ionic liquid on the reaction time was studied by varying the quantity of ionic liquid (1, 1.2, 1.5, 2, and 3 mmol/1 mmol phenyl glycidyl ether). The reactions were carried out under similar reaction conditions. It was observed that, with an increase in the proportion of ionic liquid, the azidolysis of phenyl glycidyl ether increases. The highest conversion of epoxide was obtained when the amount of ionic liquid used was 3 mmol/1 mmol epoxide (Table 1).

Table 1

Optimization study of azidolysis reaction of phenyl glycidyl ether with different amounts of [Hmim]N3 at 70 °C.

Entry[Hmim]N3 (mmol)Reaction progressTime (min)
11
21.2
31.5Complete100
42Complete85
53Complete55

The effect of the reaction temperature on the reaction time of phenyl glycidyl ether azidolysis was investigated at reaction temperatures ranging from 25 to 70 °C. The results show that the suitable reaction temperature is 70 °C (Table 2).

Table 2

Optimization study of azidolysis reaction of phenyl glycidyl ether (mmol) with [Hmim]N3 (3 mmol) at different temperatures.

EntryTemperature (°C)Reaction progressTime (min)
125
240
350completed85
460completed60
570completed55

After optimizing the conditions, we examined the generalization of these conditions to other substrates using several epoxides. Table 3 shows the results that clarify the fact that the reaction proceeds very efficiently in all cases. Different epoxides underwent ring opening easily in the presence of [Hmim]N3 at 70 °C. The products were formed in excellent yields. The conversion was complete in 50–70 min.

Table 3

Preparation of 1,2-azidoalcohols using [MIM]N3.

EntryEpoxideProductTime (min)Yield (%)
15594
27089
35088
46080
56087
66583
77082

Considering the emerging importance of [Hmim]N3 as novel reactions media, we wish to report the use of task-specific ionic liquids as efficient promoters for the ring opening of various epoxides. The procedure gives products in good yields and short reaction times and avoids using organic solvents (handling, cost, safety, pollution). Environmental-friendly ionic liquid afforded a valuable alternative to promote numerous efficient catalytic systems that have already been proposed for the ring opening of epoxides. As it can be seen in Table 3, [Hmim]N3 as a catalyst afforded good results in comparison to the other catalysts. In order to evaluate the efficiency of the method we introduce, more recently developed methods were compared with our present one on the basis of the yields and reaction times parameters; the results are given in Table 4.

Table 4

Comparison of efficiency of various catalysts in synthesis of 1,2-azidoalcohol.

EntryCatalyst/reagent/solventTemperatureTime (min)Yield (%)References
1[Hmim]N370 °C5594This work
2Network Polymer/NaN3/water80 °C9089[5]
5SiO2–PEG/NaN3/H2OReflux12095[7]
2β-cyclodextrine/TMSN3/H2Or.t30045[25]
3CeCl3/NaN3/(CH3CN\H2O)Reflux18099[26]
4[Bmim]PF6/NaN3/H2O65 °C18095[27]
6PEG-300/NaN3/Solvent free60 °C6090[28]
7MPTC/NaN3/H2OReflux3085[29]
8Er(OTf) 3/TMSN3/Solvent freer.t.40086[30]

Scheme 2 shows a plausible mechanism for the ring opening of epoxides in the [Hmim]N3 as reagent, catalyst, and solvent.

Scheme 2

Mechanism of the epoxide ring opening reaction by a task-specific ionic liquid.

3 Experimental

Products were characterized by comparison of their spectroscopic data (1H NMR, 13C NMR, and IR) and physical properties with those reported in the literature. NMR spectra were recorded in CDCl3 on Bruker Avance DPX 500 and 400 MHz spectrometers using TMS as an internal standard. FTIR spectra of KBr powder-pressed pellets were recorded on a BOMEM MB-Series 1998 FT–IR spectrometer. All yields refer to isolated products.

3.1 Procedure for the preparation of task-specific ionic liquids [Hmim]N3 from [Hmim]Cl

1-hydrogen-3-methylimidazolium chloride was prepared according to [24]. [Hmim]Cl (11.80 g, 0.1 mol) was dissolved in dry acetonitrile (25 mL) and stirred at room temperature for 25 min; NaN3 (0.1 mol) dissolved in dry acetonitrile (40 mL) was added dropwise to [Hmim]Cl over a period of 60 min at room temperature. The reaction mixture was magnetically stirred for 24 h at room temperature. The obtained white solid was washed with acetonitrile and the ionic liquid present in the filtrate was obtained by evaporation of the solvent under reduced pressure (Scheme 1).

3.2 General procedure for the preparation of 2-azidoalcohols

A mixture of epoxide (1 mmol) and [Hmim]N3 (3 mmol) was heated at 70 °C under stirring for the time shown in Table 1 (Scheme 3). Progress of reaction was monitored by TLC using ethyl acetate:n-hexane (1:5). After reaction completion, the mixture was extracted with ethyl ether (10 mL × 3), washed with brine, dried with CaCl2 and evaporated under reduced pressure. The desired azidohydrines were obtained in good to excellent isolated yields (80–94%).

Scheme 3

Synthesis of a task-specific ionic liquid.

4 Conclusion

The use of [Hmim]N3 in the azidolysis of epoxides can be considered as an interesting new alternative to the existing nucleophile and homogeneous catalysts. It is possible to obtain high conversions and very high selectivities in a variety of reactions. Short reaction times, simple work-up in isolation of the products with high purity, and mild reaction conditions are the features of this new procedure.

Acknowledgments

The authors gratefully acknowledge the financial support of this work by Shahid Chamran (Ahvaz) University Research Council.


Bibliographie

[1] S.W. Chen; S.S. Thakur; W. Li; C.K. Shin; R.B. Kawthekar; G.J. Kim J. Mol. Catal. A: Chem., 259 (2006), p. 116

[2] A.G. Habeeb; P.N.P. Rao; E.E. Knaus J. Med. Chem., 44 (2001), p. 3039

[3] S. Piantadosi; C.J. Marasco; E.J. Modest J. Med. Chem., 34 (1991), p. 1408

[4] H.C. Kolb; M.G. Finn; K.B. Sharpless Angew Chem. Int. Ed., 40 (2001), p. 2004

[5] A. Mouradzadegun; A.R. Kiasat; P. Kazemian Fard Catal. Commun., 29 (2012), p. 1

[6] F. Heidarizadeh; A. Zarei J. Chem. Soc. Pak., 34 (2012), p. 593

[7] A.R. Kiasat; M. Zayadi Catal. Commun., 9 (2008), p. 2063

[8] F. Kazemi; A.R. Kiasat; S. Ebrahimi Synth. Commun., 33 (2003), p. 999

[9] J.S. Yadav; B.V. Reddy; B. Jyothirmai; M.S.R. Murty Tetrahedron Lett., 46 (2005), p. 6559

[10] M. Chini; P. Crotti; F. Macchia Tetrahedron Lett., 31 (1999), p. 5641

[11] M. Chini; P. Crotti; L.A. Flippin; C. Gardelli; E. Giovani; F. Macchia; M. Pineschi J. Org. Chem., 58 (1993), p. 1221

[12] P. Serrano; A. Llebaria; A. Delgado J. Org. Chem., 70 (2005), p. 7829

[13] P. Crotti; V. Di Bussolo; L. Favero; F. Macchia; M. Pineschi Tetrahedron Lett., 37 (1996), p. 1675

[14] S.S. Palimkar; S.A. Siddiqui; T. Daniel; R.J. Lahoti; K.V. Srinivasan J. Org. Chem., 68 (2003), p. 9371

[15] E.F.V. Scriven; K. Turnbull Chem. Rev., 88 (1988), p. 297

[16] T.L. Greaves; C.J. Drummond; T.L. Greaves; A. Weerawardena; C. Fong; I. Krodkiewska; C.J. Drummond; Z. Duan; Y. Gu; J. Zhang; L. Zhu; Y. Deng; A.R. Hajipour; F. Rafiee; J. Akbari; A. Heydari; L. Ma’mani; H. Hassan C. R. Chimie, 108 (2008), p. 206

[17] A. Brandt; M.J. Ray; T.Q. To; D.J. Leak; R.J. Murphy; T. Welton; M. Schrems; A. Brandt; T. Welton; F. Liebner; T. Rosenau; A. Potthast; A. Brandt; J. Gräsvik; J.P. Hallett; T. Welton Green Chem., 13 (2011), p. 2489

[18] J.M. Gottfried; F. Maier; J. Rossa; D. Gerhard; P.S. Schulz; P. Wasserscheid; H.-P. Steinrück; C. Kolbeck; M. Killian; F. Maier; N. Paape; P. Wasserscheid; H.-P. Steinrück Langmuir, 220 (2006), p. 1439

[19] E.D. Bates; R.D. Mayton; I. Ntai; J.H. Davis; J.H. Davis; A.E. Visser; R.P. Swatloski; W.M. Reichert; R. Mayton; S. Sheff; A. Wierzbicki; J.H. Davis; R.D. Rogers Environ. Sci. Technol., 124 (2002), p. 926

[20] J.H. Davis; K.J. Forrester; T.L. Merrigan Tetrahedron Lett., 39 (1998), p. 8955

[21] J.H. Davis; J.D. Madura; M.D. Soutullo; C.I. Odom; A.B. Smith; D.R. McCreary; R.E. Sykora; E.A. Salter; A. Wierzbicki; J.H. Davis Inorg. Chim. Acta, 37 (1996), p. 2729

[22] J.S. Wilkes J. Mol. Catal. A: Chem., 214 (2004), p. 11

[23] A.C. Cole; J.L. Jensen; I. Ntai; K.L.T. Tran; K.J. Weaver; D.C. Forbes; J.H. Davis J. Am. Chem. Soc., 124 (2002), p. 5962

[24] R. Kore; R. Srivastava Tetrahedron Lett., 53 (2012), p. 3245

[25] A. Kamal; M. Arifuddin; M.V. Rao Tetrahedron: Asymmetry, 10 (1999), p. 4261

[26] G. Sabitha; R.S. Babu; M. Rajkumar; J.S. Yadav Org. Lett., 4 (2002), p. 343

[27] J.S. Yadav; B. Reddy; B. Jyothirmai; M.S.R. Murty Tetrahedron Lett., 46 (2005), p. 6559

[28] A.R. Kiasat; M. Fallah-Mehrjardi J. Iran. Chem. Soc., 6 (2009), p. 542

[29] A.R. Kiasat; R. Mirzajani; H. Shalbaf; T. Tabatabaei; M. Fallah-Mehrjardi J. Chin. Chem. Soc., 56 (2009), p. 594

[30] A. Procopio; P. Costanzo; R. Dalpozzo; L. Maiuolo; M. Nardi; M. Oliverio Tetrahedron Lett., 51 (2010), p. 5150


Commentaires - Politique