Grain boundary hardening and segregation in alpha Iron-Tin alloy
References (45)
- et al.
Acta Metall.
(1965) - et al.
Acta Metall.
(1963) - et al.
Acta Metall.
(1966) - et al.
Acta Metall.
(1968) - et al.
Acta Metall.
(1969) - et al.
Metallography
(1974) - et al.
Acta Metall.
(1978) Acta Metall.
(1970)- et al.
Acta Metall.
(1977) - et al.
Scripta Met.
(1978)
Scripta Met.
Scripta Met.
Acta Metall.
Scripta Met.
Acta Metall.
Scripta Met.
Scripta Met.
Trans. A.I.M.E.
Trans. A.I.M.E.
Trans. A.I.M.E.
Z. Metallk.
Acta Metall.
Cited by (116)
High-throughput first-principles investigation on grain boundary segregation of alloying elements in ferritic steel
2023, Journal of Materials Research and TechnologyInfluence of symmetrical <101¯0> high-angle tilt grain boundaries on the local mechanical properties of magnesium bicrystals
2021, Materials Science and Engineering: AMultiscale analyses of the interaction between dislocation and Σ9 symmetric tilt grain boundaries in Fe–Si bicrystals by nanoindentation technique
2021, International Journal of PlasticityCitation Excerpt :During nanoindentation, load–depth (P–h) curves often exhibit the first pop-ins known as the transition point between elastic and plastic deformation, of which origin was investigated both in experiments (Zhang and Ohmura, 2014) and atomistic simulations (Sato et al., 2019). For more than half a century, experimental indentation has also been used to assess the dislocation–GB interaction in various materials (Ngan and Chiu, 2001); e.g., Pb, Sn, Zn alloy (Aust et al., 1968), Fe alloy (Watanabe et al., 1980), NaCl (Harris et al., 1982), Nb (Chou et al., 1983; Zhou and Chou, 1985; Wang and Ngan, 2004), Ni3Al (Wo and Ngan, 2004), and α-Ti (Su et al., 2016). The mechanical aspect of the interaction can be evaluated by the change in the P–h curves of nanoindentation (Kalidindi and Vachhani, 2014).
Role of grain boundary character and its evolution on interfacial solute segregation behavior in nanocrystalline Ni-P
2020, Acta MaterialiaCitation Excerpt :Significant scatter is present in IE values of boundaries with similar misorientation angles, as well as special boundaries with similar misorientation angles and axes (identical Σ values). The absence of any trend between IE and GB misorientation, especially for HAGBs and CSL boundaries, has been reported in several previous studies as noted in the introduction [29,31–36,40]. As boundaries with same misorientation but with different boundary planes can have significant differences in energy, the same argument could also be made for the extent of solute segregation in the GBs.