Abstract
While perovskite solar cells (PSCs) have exhibited an impressive power conversion efficiency (PCE) of 26.1%, their inherent instability poses a significant obstacle to their widespread commercialisation. Researchers worldwide have diligently employed diverse strategies to enhance their stability, ranging from configuration modifications to employing varied manufacturing techniques. This review meticulously explores the latest advancements in PSC devices, focusing primarily on the strategies employed to fortify stability, with an emphasis on configuration structures and fabrication methods. The study explores the critical stability parameters and considerations relevant to the long-term stability of PSC configurations. A comprehensive examination of the evolution of PSC configurations is presented, encompassing transitions from regular to inverted designs, the introduction of hole transport layer-free designs, the incorporation of electron transport layer-free configurations, and variations in the use of organic and inorganic materials. Moreover, the review compiles pertinent articles for additional reference, providing a consolidated resource for researchers and enthusiasts in the field. This review offers recommendations to improve the stability of hybrid PSCs and provides a perspective on supporting the commercialisation of PSC technology. Addressing the stability challenges outlined in this review is crucial for unlocking the full potential of PSCs and facilitating their seamless integration into the mainstream renewable energy landscape.
Similar content being viewed by others
Data availability
The authors declare that the data supporting the findings of this study are available within the paper. Any raw data files needed in another format they are available from the corresponding author upon reasonable request.
References
I.Y. Kim, J. Ko, T.-Y. Ahn, H.-W. Cheong, Y.S. Yoon, Energy materials for energy conversion and storage: focus on research conducted in Korea. J. Korean Ceram. Soc. 58, 645–661 (2021). https://doi.org/10.1007/s43207-021-00152-2
B. Hazmi, M. Beygisangchin, U. Rashid, W.N.A.W. Mokhtar, T. Tsubota, A. Alsalme, C. Ngamcharussrivichai, Glycerol-based retrievable heterogeneous catalysts for single-pot esterification of palm fatty acid distillate to biodiesel. Molecules 27, 7142 (2022). https://doi.org/10.3390/molecules27207142
U. Rashid, C.L. Lee, B. Hazmi, S. Gamal, M. Beygisangchin, Standard specifications for renewable diesel, in Renewable Diesel (Elsevier, London, 2024). pp. 33–63
M.M. Yashim, M.H. Sainorudin, M. Mohammad, A. Fudholi, N. Asim, H. Razali, K. Sopian, Recent advances on lightweight aerogel as a porous receiver layer for solar thermal technology application. Sol. Energy Mater. Sol. Cells 228, 111131 (2021). https://doi.org/10.1016/j.solmat.2021.111131
M. Mat Yashim, M. Mohammad, N. Asim, A. Fudholi, Structure and properties of monolithic cellulose aerogels prepared from oil palm cellulose microfiber (OPMFC) using alkaline/urea solvent system potentially for solar thermal applications. J Solgel Sci Technol. 108, 47–59 (2023). https://doi.org/10.1007/s10971-023-06189-5
N. Li, X. Niu, Q. Chen, H. Zhou, Towards commercialization: the operational stability of perovskite solar cells. Chem. Soc. Rev. 49, 8235–8286 (2020). https://doi.org/10.1039/D0CS00573H
N. Alias, A. Ali Umar, S.N. Sadikin, J. Ridwan, A.A. Hamzah, M.I. Ali Umar, A.A. Ehsan, M. Nurdin, Y. Zhan, Air-processable perovskite solar cells by hexamine molecule phase stabilization. ACS Omega 8, 18874–18881 (2023). https://doi.org/10.1021/acsomega.3c01236
S. Idrissi, O. Mounkachi, L. Bahmad, A. Benyoussef, Study of the solar perovskites: XZnF3 (X = Ag, Li or Na) by DFT and TDDFT methods. J. Korean Ceram. Soc. 60, 424–433 (2023). https://doi.org/10.1007/s43207-022-00277-y
G.Y. Kim, A. Senocrate, T.-Y. Yang, G. Gregori, M. Grätzel, J. Maier, Large tunable photoeffect on ion conduction in halide perovskites and implications for photodecomposition. Nat. Mater. 17, 445–449 (2018). https://doi.org/10.1038/s41563-018-0038-0
S. Mahjabin, M.I. Hossain, Md.M. Haque, M.S. Bashar, M.S. Jamal, Md. Shahiduzzaman, G. Muhammad, K. Sopian, Md. Akhtaruzzaman, Sputtered WOx thin film as the electron transport layer for efficient perovskite solar cells. Appl. Phys. A 128, 358 (2022). https://doi.org/10.1007/s00339-022-05500-5
N. Aristidou, C. Eames, I. Sanchez-Molina, X. Bu, J. Kosco, M.S. Islam, S.A. Haque, Fast oxygen diffusion and iodide defects mediate oxygen-induced degradation of perovskite solar cells. Nat. Commun. 8, 15218 (2017). https://doi.org/10.1038/ncomms15218
Y. Kato, L.K. Ono, M.V. Lee, S. Wang, S.R. Raga, Y. Qi, Silver iodide formation in methyl ammonium lead iodide perovskite solar cells with silver top electrodes. Adv. Mater. Interfaces 2, 1500195 (2015). https://doi.org/10.1002/admi.201500195
M.S. Jamal, S.A. Shahahmadi, M.A. Abdul Wadi, P. Chelvanathan, N. Asim, H. Misran, M.I. Hossain, N. Amin, K. Sopian, Md. Akhtaruzzaman, Effect of defect density and energy level mismatch on the performance of perovskite solar cells by numerical simulation. Optik (Stuttg) 182, 1204–1210 (2019). https://doi.org/10.1016/j.ijleo.2018.12.163
N. Rolston, B.L. Watson, C.D. Bailie, M.D. McGehee, J.P. Bastos, R. Gehlhaar, J.-E. Kim, D. Vak, A.T. Mallajosyula, G. Gupta, A.D. Mohite, R.H. Dauskardt, Mechanical integrity of solution-processed perovskite solar cells. Extreme Mech Lett. 9, 353–358 (2016). https://doi.org/10.1016/j.eml.2016.06.006
R. Cheacharoen, N. Rolston, D. Harwood, K.A. Bush, R.H. Dauskardt, M.D. McGehee, Design and understanding of encapsulated perovskite solar cells to withstand temperature cycling. Energy Environ. Sci. 11, 144–150 (2018). https://doi.org/10.1039/C7EE02564E
N. Rolston, K.A. Bush, A.D. Printz, A. Gold-Parker, Y. Ding, M.F. Toney, M.D. McGehee, R.H. Dauskardt, Engineering stress in perovskite solar cells to improve stability. Adv. Energy Mater. 8, 1802139 (2018). https://doi.org/10.1002/aenm.201802139
M. Mottakin, D.K. Sarkar, V. Selvanathan, M.J. Rashid, K. Sobayel, A.K.M. Hasan, M. Ariful Islam, G. Muhammad, M. Shahiduzzaman, M. Akhtaruzzaman, Photoelectric performance of environmentally benign Cs2TiBr 6-based perovskite solar cell using spinel NiCo2O4 as HTL. Optik (Stuttg) 272, 170232 (2023). https://doi.org/10.1016/j.ijleo.2022.170232
A.R. Bowring, L. Bertoluzzi, B.C. O’Regan, M.D. McGehee, Reverse bias behavior of halide perovskite solar cells. Adv. Energy Mater. 8, 1702365 (2018). https://doi.org/10.1002/aenm.201702365
Md.A. Islam, Md. Akhtaruzzaman, M. Mottakin, V. Selvanathan, Md. Shahiduzzaman, M.N.I. Khan, A.F.M.M. Rabbani, M.J. Rashid, M.A. Ibrahim, K. Sopian, K. Sobayel, Potential-induced performance degradation (PID) applied on a perovskite solar cell: exploring its effect on cell performance through numerical simulation. J. Electron. Mater. 52, 3205–3218 (2023). https://doi.org/10.1007/s11664-023-10284-2
W.S. Yang, B.-W. Park, E.H. Jung, N.J. Jeon, Y.C. Kim, D.U. Lee, S.S. Shin, J. Seo, E.K. Kim, J.H. Noh, S. Seok, Il: iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells. Science 1979(356), 1376–1379 (2017). https://doi.org/10.1126/science.aan2301
D. Bi, W. Tress, M.I. Dar, P. Gao, J. Luo, C. Renevier, K. Schenk, A. Abate, F. Giordano, J.-P. Correa Baena, J.-D. Decoppet, S.M. Zakeeruddin, M.K. Nazeeruddin, M. Grätzel, A. Hagfeldt, Efficient luminescent solar cells based on tailored mixed-cation perovskites. Sci. Adv. (2016). https://doi.org/10.1126/sciadv.1501170
R. Prasanna, A. Gold-Parker, T. Leijtens, B. Conings, A. Babayigit, H.-G. Boyen, M.F. Toney, M.D. McGehee, Band gap tuning via lattice contraction and octahedral tilting in perovskite materials for photovoltaics. J. Am. Chem. Soc. 139, 11117–11124 (2017). https://doi.org/10.1021/jacs.7b04981
M. Akhtaruzzaman, M.I. Hossain, M.A. Islam, M. Shahiduzzaman, G. Muhammad, A.K. Mahmud Hasan, Y.H. Tsang, K. Sopian, Nanophotonic-structured front contact for high-performance perovskite solar cells. Sci. China Mater. 65, 1727–1740 (2022). https://doi.org/10.1007/s40843-021-1973-y
K. Liu, S. Rafique, S.F. Musolino, Z. Cai, F. Liu, X. Li, Y. Yuan, Q. Bao, Y. Yang, J. Chu, X. Peng, C. Nie, W. Yuan, S. Zhang, J. Wang, Y. Pan, H. Zhang, X. Cai, Z. Shi, C. Li, H. Wang, L. Deng, T. Hu, Y. Wang, Y. Wang, S. Chen, L. Shi, P. Ayala, J.E. Wulff, A. Yu, Y. Zhan, Covalent bonding strategy to enable non-volatile organic cation perovskite for highly stable and efficient solar cells. Joule. 7, 1033–1050 (2023). https://doi.org/10.1016/j.joule.2023.03.019
W.-C. Chang, D.-H. Lan, K.-M. Lee, X.-F. Wang, C.-L. Liu, Controlled deposition and performance optimization of perovskite solar cells using ultrasonic spray-coating of photoactive layers. Chemsuschem 10, 1405–1412 (2017). https://doi.org/10.1002/cssc.201601711
L. Huang, X. Sun, C. Li, J. Xu, R. Xu, Y. Du, J. Ni, H. Cai, J. Li, Z. Hu, J. Zhang, UV-sintered low-temperature solution-processed SnO2 as robust electron transport layer for efficient planar heterojunction perovskite solar cells. ACS Appl. Mater. Interfaces 9, 21909–21920 (2017). https://doi.org/10.1021/acsami.7b04392
T. Leijtens, R. Prasanna, K.A. Bush, G.E. Eperon, J.A. Raiford, A. Gold-Parker, E.J. Wolf, S.A. Swifter, C.C. Boyd, H.-P. Wang, M.F. Toney, S.F. Bent, M.D. McGehee, Tin–lead halide perovskites with improved thermal and air stability for efficient all-perovskite tandem solar cells. Sustain. Energy Fuels 2, 2450–2459 (2018). https://doi.org/10.1039/C8SE00314A
J.R. Poindexter, R.L.Z. Hoye, L. Nienhaus, R.C. Kurchin, A.E. Morishige, E.E. Looney, A. Osherov, J.-P. Correa-Baena, B. Lai, V. Bulović, V. Stevanović, M.G. Bawendi, T. Buonassisi, High tolerance to iron contamination in lead halide perovskite solar cells. ACS Nano 11, 7101–7109 (2017). https://doi.org/10.1021/acsnano.7b02734
S. He, L. Qiu, L.K. Ono, Y. Qi, How far are we from attaining 10-year lifetime for metal halide perovskite solar cells? Mater. Sci. Eng. R. Rep. 140, 100545 (2020). https://doi.org/10.1016/j.mser.2020.100545
S. Akin, Hysteresis-free planar perovskite solar cells with a breakthrough efficiency of 22% and superior operational stability over 2000 h. ACS Appl. Mater. Interfaces 11, 39998–40005 (2019). https://doi.org/10.1021/acsami.9b13876
I. Hamideddine, N. Tahiri, O.E. Bounagui, H. Ez-Zahraouy, Ab initio study of structural and optical properties of the halide perovskite KBX3 compound. J. Korean Ceram. Soc. 59, 350–358 (2022). https://doi.org/10.1007/s43207-021-00178-6
A.K. Mahmud Hasan, M.S. Jamal, N. Kamaruddin, N. Asim, K. Sopian, M.D. Akhtaruzzaman, O. Raed, Integration of NiO layer as hole transport material in perovskite solar cells, in 2019 6th International Conference on Space Science and Communication (IconSpace) (IEEE, 2019). pp. 267–270
B. Akenoun, S. Dahbi, N. Tahiri, O. El Bounagui, H. Ez-Zahraouy, A. Benyoussef, The effect of chalcogens-doped with dilation strain on the electronic, optic, and thermoelectric properties of perovskite BaSnO3 compound. J. Korean Ceram. Soc. 59, 715–728 (2022). https://doi.org/10.1007/s43207-022-00212-1
L.M. Shaker, A. Alamiery, W.N.R.W. Isahak, W.K. Al-Azzawi, Corrosion in solar cells: challenges and solutions for enhanced performance and durability. J. Opt. (2023). https://doi.org/10.1007/s12596-023-01277-9
H.-S. Kim, C.-R. Lee, J.-H. Im, K.-B. Lee, T. Moehl, A. Marchioro, S.-J. Moon, R. Humphry-Baker, J.-H. Yum, J.E. Moser, M. Grätzel, N.-G. Park, Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci. Rep. 2, 591 (2012). https://doi.org/10.1038/srep00591
H. Shen, D. Walter, Y. Wu, K.C. Fong, D.A. Jacobs, T. Duong, J. Peng, K. Weber, T.P. White, K.R. Catchpole, Monolithic perovskite/si tandem solar cells: pathways to over 30% efficiency. Adv. Energy Mater. (2020). https://doi.org/10.1002/aenm.201902840
C. Ballif, F.-J. Haug, M. Boccard, P.J. Verlinden, G. Hahn, Status and perspectives of crystalline silicon photovoltaics in research and industry. Nat. Rev. Mater. 7, 597–616 (2022). https://doi.org/10.1038/s41578-022-00423-2
P. Kung, M. Li, P. Lin, Y. Chiang, C. Chan, T. Guo, P. Chen, A review of inorganic hole transport materials for perovskite solar cells. Adv. Mater. Interfaces 5, 1800882 (2018). https://doi.org/10.1002/admi.201800882
N.A.N. Ouedraogo, G.O. Odunmbaku, Y. Ouyang, X. Xiong, B. Guo, S. Chen, S. Lu, K. Sun, Eco-friendly processing of perovskite solar cells in ambient air. Renew. Sustain. Energy Rev. 192, 114161 (2024). https://doi.org/10.1016/j.rser.2023.114161
Y. Zhang, L. Xu, Y. Wu, H. Zhang, F. Zeng, J. Xing, B. Liu, Y. Qi, B. Dong, X. Bai, H. Song, Synergetic excess PbI2 and reduced Pb leakage management strategy for 24.28% efficient, stable and eco-friendly perovskite solar cells. Adv. Funct. Mater. (2023). https://doi.org/10.1002/adfm.202214102
S.F. Ahmed, N. Islam, P.S. Kumar, A.T. Hoang, M. Mofijur, A. Inayat, G.M. Shafiullah, D.-V.N. Vo, I.A. Badruddin, S. Kamangar, Perovskite solar cells: thermal and chemical stability improvement, and economic analysis. Mater Today Chem. 27, 101284 (2023). https://doi.org/10.1016/j.mtchem.2022.101284
B. Xiao, Y. Qian, X. Li, Y. Tao, Z. Yi, Q. Jiang, Y. Luo, J. Yang, Enhancing the stability of planar perovskite solar cells by green and inexpensive cellulose acetate butyrate. J. Energy Chem. 76, 259–265 (2023). https://doi.org/10.1016/j.jechem.2022.09.039
Q.-Q. Chu, Z. Sun, D. Wang, B. Cheng, H. Wang, C.-P. Wong, B. Fang, Encapsulation: the path to commercialization of stable perovskite solar cells. Matter. 6, 3838–3863 (2023). https://doi.org/10.1016/j.matt.2023.08.016
L. Ye, P. Guo, J. Su, K. Zhang, C. Liu, P. Yang, W. Zhao, P. Zhao, Z. Liu, J. Chang, Q. Ye, H. Wang, Managing secondary phase lead iodide in hybrid perovskites via surface reconstruction for high-performance perovskite solar cells with robust environmental stability. Angew. Chem. Int. Ed. (2023). https://doi.org/10.1002/anie.202300678
B. Liu, X. Ren, R. Li, Y. Chen, D. He, Y. Li, Q. Zhou, D. Ma, X. Han, X. Shai, K. Yang, S. Lu, Z. Zhang, J. Feng, C. Chen, J. Yi, J. Chen, Stabilizing top interface by molecular locking strategy with polydentate chelating biomaterials toward efficient and stable perovskite solar cells in ambient air. Adv. Mater. (2024). https://doi.org/10.1002/adma.202312679
N. Srisamran, J. Sudchanham, C. Sriprachuabwong, K. Srisawad, P. Pakawatpanurut, K. Lohawet, P. Kumnorkaew, T. Krajangsang, A. Tuantranont, Enhanced performance and stability of fully printed perovskite solar cells and modules by ternary additives under high humidity. Energy Fuels 37, 6049–6061 (2023). https://doi.org/10.1021/acs.energyfuels.2c03641
J. Li, J. Duan, Q. Guo, Z. Qi, X. Duan, H. Li, S. Geng, N. Liu, B. He, P. Yang, Q. Tang, Accelerating thermal transfer in perovskite films for high-efficiency and stable photovoltaics. Adv. Funct. Mater. (2023). https://doi.org/10.1002/adfm.202308036
P. Xie, H. Xiao, Y. Qiao, G. Qu, J. Chen, X. Liu, Z.-X. Xu, Radical reinforced defect passivation strategy for efficient and stable MAPbI3 perovskite solar cells fabricated in air using a green anti-solvent process. Chem. Eng. J. 462, 142328 (2023). https://doi.org/10.1016/j.cej.2023.142328
B. Liu, D. He, Q. Zhou, Y. Chen, P. He, X. Han, D. Ma, Y. He, Y. Li, P. Zhao, Z.-X. Xu, S. Lu, Z. Zang, J. Chen, 1-Adamantanamine hydrochloride resists environmental corrosion to obtain highly efficient and stable perovskite solar cells. J. Phys. Chem. Lett. 14, 2501–2508 (2023). https://doi.org/10.1021/acs.jpclett.3c00298
V. Ozkaya, F. Sadegh, M. Unal, B. Alkan, M. Ebic, T. Ozturk, M. Yilmaz, S. Akin, Eco-friendly boost for perovskite photovoltaics: harnessing cellulose-modified SnO2 as a high-performance electron transporting material. ACS Appl. Mater. Interfaces (2023). https://doi.org/10.1021/acsami.3c12698
D.K. Sarkar, M. Mottakin, A.K.M. Hasan, M.A. Islam, M.M. Haque, V. Selvanathan, M. Aminuzzaman, A.M. Alanazi, M. Akhtaruzzaman, Numerical investigation of Aloe Vera-mediated green synthesized CuAlO2 as HTL in Pb-free perovskite solar cells. J. Taibah Univ. Sci. (2024). https://doi.org/10.1080/16583655.2023.2300856
T. Li, Q. Xiong, C. Hu, C. Wang, N. Zhang, S.-Y. Lien, P. Gao, Improving crystallization and stability of perovskite solar cells using a low-temperature treated A-site cation solution in the sequential deposition. Molecules 28, 4103 (2023). https://doi.org/10.3390/molecules28104103
N. Kwon, J. Lee, M.J. Ko, Y.Y. Kim, J. Seo, Recent progress of eco-friendly manufacturing process of efficient perovskite solar cells. Nano Converg. 10, 28 (2023). https://doi.org/10.1186/s40580-023-00375-5
P.A.M. Mercy, K.S.J. Wilson, Development of environmental friendly high performance Cs2TiBr 6 based perovskite solar cell using numerical simulation. Appl. Surf. Sci. Adv. 15, 100394 (2023). https://doi.org/10.1016/j.apsadv.2023.100394
N.F. Ramli, P.N.A. Fahsyar, N.A. Ludin, M.A.M. Teridi, M.A. Ibrahim, S. Sepeai, Graphene dispersion as a passivation layer for the enhancement of perovskite solar cell stability. Mater. Chem. Phys. 257, 123798 (2021). https://doi.org/10.1016/j.matchemphys.2020.123798
A.K. Mahmud Hasan, I. Raifuku, N. Amin, Y. Ishikawa, D.K. Sarkar, K. Sobayel, M.R. Karim, A. Ul-Hamid, H. Abdullah, M. Shahiduzzaman, Y. Uraoka, K. Sopian, M. Akhtaruzzaman, Air-stable perovskite photovoltaic cells with low temperature deposited NiOx as an efficient hole-transporting material. Opt. Mater. Express 10, 1801 (2020). https://doi.org/10.1364/OME.391321
M.F. Mohamad Noh, N.A. Arzaee, I.N. Nawas Mumthas, N.A. Mohamed, S.N.F. Mohd Nasir, J. Safaei, A.R.B.M. Yusoff, M.K. Nazeeruddin, M.A. Mat Teridi, High-humidity processed perovskite solar cells. J. Mater. Chem. A Mater. 8, 10481–10518 (2020). https://doi.org/10.1039/D0TA01178A
M.F.M. Noh, N.A. Arzaee, M.A.M. Teridi, Effect of oxygen vacancies in electron transport layer for perovskite solar cells, in Solar Cells (Springer, Cham, 2020), pp. 283–305
Y. Chen, Q. Wang, W. Tang, W. Qiu, Y. Wu, Q. Peng, Heterocyclic amino acid molecule as a multifunctional interfacial bridge for improving the efficiency and stability of quadruple cation perovskite solar cells. Nano Energy 107, 108154 (2023). https://doi.org/10.1016/j.nanoen.2022.108154
J. Wang, Y. Che, Y. Duan, Z. Liu, S. Yang, D. Xu, Z. Fang, X. Lei, Y. Li, S. Liu, (Frank): 21.15%-efficiency and stable γ-CsPbI3 perovskite solar cells enabled by an acyloin ligand. Adv. Mater. (2023). https://doi.org/10.1002/adma.202210223
N.T.P. Hartono, H. Köbler, P. Graniero, M. Khenkin, R. Schlatmann, C. Ulbrich, A. Abate, Stability follows efficiency based on the analysis of a large perovskite solar cells ageing dataset. Nat. Commun. 14, 4869 (2023). https://doi.org/10.1038/s41467-023-40585-3
Q. Cai, Y. Yao, Y. Lu, M. Wang, Y. Zhang, D. Song, Z. Xu, X. Li, D. Wei, Stable perovskite solar cells with 22% efficiency enabled by inhibiting migration/loss of iodide ions. Phys. Chem. Chem. Phys. 25, 6955–6962 (2023). https://doi.org/10.1039/D2CP04422F
C. Zhang, H. Li, C. Gong, Q. Zhuang, J. Chen, Z. Zang, Crystallization manipulation and holistic defect passivation toward stable and efficient inverted perovskite solar cells. Energy Environ. Sci. 16, 3825–3836 (2023). https://doi.org/10.1039/D3EE00413A
M. Karimipour, A. Paingott Parambil, K. Tabah Tanko, T. Zhang, F. Gao, M. Lira-Cantu, Functionalized MXene/halide perovskite heterojunctions for perovskite solar cells stable under real outdoor conditions. Adv. Energy Mater. (2023). https://doi.org/10.1002/aenm.202301959
K.K. Bass, R.E. McAnally, S. Zhou, P.I. Djurovich, M.E. Thompson, B.C. Melot, Influence of moisture on the preparation, crystal structure, and photophysical properties of organohalide perovskites. Chem. Commun. 50, 15819–15822 (2014). https://doi.org/10.1039/C4CC05231E
C.C. Boyd, R. Cheacharoen, T. Leijtens, M.D. McGehee, Understanding degradation mechanisms and improving stability of perovskite photovoltaics. Chem. Rev. 119, 3418–3451 (2019). https://doi.org/10.1021/acs.chemrev.8b00336
Q. Tai, K.-C. Tang, F. Yan, Recent progress of inorganic perovskite solar cells. Energy Environ. Sci. 12, 2375–2405 (2019). https://doi.org/10.1039/C9EE01479A
H. Min, D.Y. Lee, J. Kim, G. Kim, K.S. Lee, J. Kim, M.J. Paik, Y.K. Kim, K.S. Kim, M.G. Kim, T.J. Shin, S. Il Seok, Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes. Nature 598, 444–450 (2021). https://doi.org/10.1038/s41586-021-03964-8
A. Bhat, B. Dhamaniya, P. Chhillar, T. Korukonda, G. Rawat, S. Pathak, Analysing the prospects of perovskite solar cells within the purview of recent scientific advancements. Crystals (Basel) 8, 242 (2018). https://doi.org/10.3390/cryst8060242
T. Ibn-Mohammed, S.C.L. Koh, I.M. Reaney, A. Acquaye, G. Schileo, K.B. Mustapha, R. Greenough, Perovskite solar cells: an integrated hybrid lifecycle assessment and review in comparison with other photovoltaic technologies. Renew. Sustain. Energy Rev. 80, 1321–1344 (2017). https://doi.org/10.1016/j.rser.2017.05.095
G. Grancini, C. Roldán-Carmona, I. Zimmermann, E. Mosconi, X. Lee, D. Martineau, S. Narbey, F. Oswald, F. De Angelis, M. Graetzel, M.K. Nazeeruddin, One-year stable perovskite solar cells by 2D/3D interface engineering. Nat. Commun. 8, 15684 (2017). https://doi.org/10.1038/ncomms15684
X. Qin, Z. Zhao, Y. Wang, J. Wu, Q. Jiang, J. You, Recent progress in stability of perovskite solar cells. J. Semicond. 38, 011002 (2017). https://doi.org/10.1088/1674-4926/38/1/011002
Y. Rong, Y. Hu, A. Mei, H. Tan, M.I. Saidaminov, SIl. Seok, M.D. McGehee, E.H. Sargent, H. Han, Challenges for commercializing perovskite solar cells. Science (1979) (2018). https://doi.org/10.1126/science.aat8235
M.A. Green, A. Ho-Baillie, H.J. Snaith, The emergence of perovskite solar cells. Nat. Photonics 8, 506–514 (2014). https://doi.org/10.1038/nphoton.2014.134
S. Kazim, M.K. Nazeeruddin, M. Grätzel, S. Ahmad, Perovskite as light harvester: a game changer in photovoltaics. Angew. Chem. Int. Ed. 53, 2812–2824 (2014). https://doi.org/10.1002/anie.201308719
S.A. Bretschneider, J. Weickert, J.A. Dorman, L. Schmidt-Mende, Research update: physical and electrical characteristics of lead halide perovskites for solar cell applications. APL Mater. 2, 040701 (2014). https://doi.org/10.1063/1.4871795
D.B. Mitzi, Synthesis, structure, and properties of organic–inorganic perovskites and related materials, in Presented at the March 9 (2007)
J.-P. Correa-Baena, A. Abate, M. Saliba, W. Tress, T. Jesper Jacobsson, M. Grätzel, A. Hagfeldt, The rapid evolution of highly efficient perovskite solar cells. Energy Environ. Sci. 10, 710–727 (2017). https://doi.org/10.1039/C6EE03397K
X. Jiang, Z. Yu, J. Lai, Y. Zhang, N. Lei, D. Wang, L. Sun, Efficient perovskite solar cells employing a solution-processable copper phthalocyanine as a hole-transporting material. Sci. China Chem. 60, 423–430 (2017). https://doi.org/10.1007/s11426-016-0393-5
M. Shahinuzzaman, S. Afroz, H. Mohafez, M. Jamal, M. Khandaker, A. Sulieman, N. Tamam, M. Islam, Roles of inorganic oxide based HTMs towards highly efficient and long-term stable PSC—a review. Nanomaterials 12, 3003 (2022). https://doi.org/10.3390/nano12173003
L. Tzounis, T. Stergiopoulos, A. Zachariadis, C. Gravalidis, A. Laskarakis, S. Logothetidis, Perovskite solar cells from small scale spin coating process towards roll-to-roll printing: optical and morphological studies. Mater Today Proc. 4, 5082–5089 (2017). https://doi.org/10.1016/j.matpr.2017.04.117
M.Á. Reinoso, C.A. Otálora, G. Gordillo, Improvement properties of hybrid halide perovskite thin films prepared by sequential evaporation for planar solar cells. Materials 12, 1394 (2019). https://doi.org/10.3390/ma12091394
F. Guo, W. He, S. Qiu, C. Wang, X. Liu, K. Forberich, C.J. Brabec, Y. Mai, Sequential deposition of high-quality photovoltaic perovskite layers via scalable printing methods. Adv. Funct. Mater. 29, 1900964 (2019). https://doi.org/10.1002/adfm.201900964
M. Jung, S.-G. Ji, G. Kim, S. Seok, Il: Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications. Chem. Soc. Rev. 48, 2011–2038 (2019). https://doi.org/10.1039/C8CS00656C
A. Kojima, K. Teshima, Y. Shirai, T. Miyasaka, Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131, 6050–6051 (2009). https://doi.org/10.1021/ja809598r
M.M. Lee, J. Teuscher, T. Miyasaka, T.N. Murakami, H.J. Snaith, Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites. Science 1979(338), 643–647 (2012). https://doi.org/10.1126/science.1228604
W. Ke, G. Fang, Q. Liu, L. Xiong, P. Qin, H. Tao, J. Wang, H. Lei, B. Li, J. Wan, G. Yang, Y. Yan, Low-temperature solution-processed tin oxide as an alternative electron transporting layer for efficient perovskite solar cells. J. Am. Chem. Soc. 137, 6730–6733 (2015). https://doi.org/10.1021/jacs.5b01994
L. Etgar, P. Gao, Z. Xue, Q. Peng, A.K. Chandiran, B. Liu, Md.K. Nazeeruddin, M. Grätzel, Mesoscopic CH3 NH3 PbI3/TiO2 heterojunction solar cells. J. Am. Chem. Soc. 134, 17396–17399 (2012). https://doi.org/10.1021/ja307789s
K.-C. Wang, J.-Y. Jeng, P.-S. Shen, Y.-C. Chang, E.W.-G. Diau, C.-H. Tsai, T.-Y. Chao, H.-C. Hsu, P.-Y. Lin, P. Chen, P-type mesoscopic nickel oxide/organometallic perovskite heterojunction solar cells. Sci. Rep. 4, 1–8 (2014)
L. Meng, J. You, T.-F. Guo, Y. Yang, Recent advances in the inverted planar structure of perovskite solar cells. Acc. Chem. Res. 49, 155–165 (2016). https://doi.org/10.1021/acs.accounts.5b00404
R. Fan, Y. Huang, L. Wang, L. Li, G. Zheng, H. Zhou, The progress of interface design in perovskite-based solar cells. Adv. Energy Mater. 6, 1600460 (2016). https://doi.org/10.1002/aenm.201600460
H.S. Jung, N.-G. Park, Perovskite solar cells: from materials to devices. Small 11, 10–25 (2015). https://doi.org/10.1002/smll.201402767
J. Chen, N.-G. Park, Inorganic hole transporting materials for stable and high efficiency perovskite solar cells. J. Phys. Chem. C 122, 14039–14063 (2018). https://doi.org/10.1021/acs.jpcc.8b01177
E. Edri, S. Kirmayer, A. Henning, S. Mukhopadhyay, K. Gartsman, Y. Rosenwaks, G. Hodes, D. Cahen, Why lead methylammonium tri-iodide perovskite-based solar cells require a mesoporous electron transporting scaffold (but not necessarily a hole conductor). Nano Lett. 14, 1000–1004 (2014). https://doi.org/10.1021/nl404454h
D. Bryant, N. Aristidou, S. Pont, I. Sanchez-Molina, T. Chotchunangatchaval, S. Wheeler, J.R. Durrant, S.A. Haque, Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells. Energy Environ. Sci. 9, 1655–1660 (2016). https://doi.org/10.1039/C6EE00409A
M. Saliba, T. Matsui, J.-Y. Seo, K. Domanski, J.-P. Correa-Baena, M.K. Nazeeruddin, S.M. Zakeeruddin, W. Tress, A. Abate, A. Hagfeldt, M. Grätzel, Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency. Energy Environ. Sci. 9, 1989–1997 (2016). https://doi.org/10.1039/C5EE03874J
W. Li, W. Zhang, S. Van Reenen, R.J. Sutton, J. Fan, A.A. Haghighirad, M.B. Johnston, L. Wang, H.J. Snaith, Enhanced UV–light stability of planar heterojunction perovskite solar cells with caesium bromide interface modification. Energy Environ. Sci. 9, 490–498 (2016). https://doi.org/10.1039/C5EE03522H
F.T.F. O’Mahony, Y.H. Lee, C. Jellett, S. Dmitrov, D.T.J. Bryant, J.R. Durrant, B.C. O’Regan, M. Graetzel, M.K. Nazeeruddin, S.A. Haque, Improved environmental stability of organic lead trihalide perovskite-based photoactive-layers in the presence of mesoporous TiO2. J. Mater. Chem. A Mater. 3, 7219–7223 (2015). https://doi.org/10.1039/C5TA01221J
N. Chander, A.F. Khan, P.S. Chandrasekhar, E. Thouti, S.K. Swami, V. Dutta, V.K. Komarala, Reduced ultraviolet light induced degradation and enhanced light harvesting using YVO 4: Eu3+ down-shifting nano-phosphor layer in organometal halide perovskite solar cells. Appl. Phys. Lett. 105, 033904 (2014). https://doi.org/10.1063/1.4891181
X. Zhao, N.-G. Park, Stability issues on perovskite solar cells. Photonics. 2, 1139–1151 (2015). https://doi.org/10.3390/photonics2041139
J. Wang, Y. Chen, M. Liang, G. Ge, R. Zhou, Z. Sun, S. Xue, A new thermal-stable truxene-based hole-transporting material for perovskite solar cells. Dyes Pigm. 125, 399–406 (2016). https://doi.org/10.1016/j.dyepig.2015.11.004
B. Philippe, B.-W. Park, R. Lindblad, J. Oscarsson, S. Ahmadi, E.M.J. Johansson, H. Rensmo, Chemical and electronic structure characterization of lead halide perovskites and stability behavior under different exposures—a photoelectron spectroscopy investigation. Chem. Mater. 27, 1720–1731 (2015). https://doi.org/10.1021/acs.chemmater.5b00348
A.B. Djurišić, F. Liu, A.M.C. Ng, Q. Dong, M.K. Wong, A. Ng, C. Surya, Stability issues of the next generation solar cells. Phys. Status Solidi (RRL) Rapid Res. Lett. 10, 281–299 (2016). https://doi.org/10.1002/pssr.201600012
M. Zhang, H. Yu, M. Lyu, Q. Wang, J.-H. Yun, L. Wang, Composition-dependent photoluminescence intensity and prolonged recombination lifetime of perovskite CH3NH3PbBr3–xClx films. Chem. Commun. 50, 11727–11730 (2014). https://doi.org/10.1039/C4CC04973J
L. Badia, E. Mas-Marzá, R.S. Sánchez, E.M. Barea, J. Bisquert, I. Mora-Seró, New iridium complex as additive to the spiro-OMeTAD in perovskite solar cells with enhanced stability. APL Mater. 2, 081507 (2014). https://doi.org/10.1063/1.4890545
Y.S. Kwon, J. Lim, H.-J. Yun, Y.-H. Kim, T. Park, A diketopyrrolopyrrole-containing hole transporting conjugated polymer for use in efficient stable organic–inorganic hybrid solar cells based on a perovskite. Energy Environ. Sci. 7, 1454 (2014). https://doi.org/10.1039/c3ee44174a
E.L. Unger, E.T. Hoke, C.D. Bailie, W.H. Nguyen, A.R. Bowring, T. Heumüller, M.G. Christoforo, M.D. McGehee, Hysteresis and transient behavior in current–voltage measurements of hybrid-perovskite absorber solar cells. Energy Environ. Sci. 7, 3690–3698 (2014). https://doi.org/10.1039/C4EE02465F
I. Hwang, I. Jeong, J. Lee, M.J. Ko, K. Yong, Enhancing stability of perovskite solar cells to moisture by the facile hydrophobic passivation. ACS Appl. Mater. Interfaces 7, 17330–17336 (2015). https://doi.org/10.1021/acsami.5b04490
W.H. Nguyen, C.D. Bailie, E.L. Unger, M.D. McGehee, Enhancing the hole-conductivity of spiro-OMeTAD without oxygen or lithium salts by using spiro(TFSI) 2 in perovskite and dye-sensitized solar cells. J. Am. Chem. Soc. 136, 10996–11001 (2014). https://doi.org/10.1021/ja504539w
D. Wang, M. Wright, N.K. Elumalai, A. Uddin, Stability of perovskite solar cells. Sol. Energy Mater. Sol. Cells 147, 255–275 (2016). https://doi.org/10.1016/j.solmat.2015.12.025
F. Machui, M. Hösel, N. Li, G.D. Spyropoulos, T. Ameri, R.R. Søndergaard, M. Jørgensen, A. Scheel, D. Gaiser, K. Kreul, D. Lenssen, M. Legros, N. Lemaitre, M. Vilkman, M. Välimäki, S. Nordman, C.J. Brabec, F.C. Krebs, Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture. Energy Environ. Sci. 7, 2792 (2014). https://doi.org/10.1039/C4EE01222D
A. Rivaton, S. Chambon, M. Manceau, J.-L. Gardette, N. Lemaître, S. Guillerez, Light-induced degradation of the active layer of polymer-based solar cells. Polym. Degrad. Stab. 95, 278–284 (2010). https://doi.org/10.1016/j.polymdegradstab.2009.11.021
T.M. Koh, K. Fu, Y. Fang, S. Chen, T.C. Sum, N. Mathews, S.G. Mhaisalkar, P.P. Boix, T. Baikie, Formamidinium-containing metal-halide: an alternative material for near-IR absorption perovskite solar cells. J. Phys. Chem. C 118, 16458–16462 (2014). https://doi.org/10.1021/jp411112k
J. Yin, J. Cao, X. He, S. Yuan, S. Sun, J. Li, N. Zheng, L. Lin, Improved stability of perovskite solar cells in ambient air by controlling the mesoporous layer. J. Mater. Chem. A Mater. 3, 16860–16866 (2015). https://doi.org/10.1039/C5TA02843D
I.C. Smith, E.T. Hoke, D. Solis-Ibarra, M.D. McGehee, H.I. Karunadasa, A layered hybrid perovskite solar-cell absorber with enhanced moisture stability. Angew. Chem. Int. Ed. 53, 11232–11235 (2014). https://doi.org/10.1002/anie.201406466
P. Reinhard, A. Chirila, P. Blosch, F. Pianezzi, S. Nishiwaki, S. Buechelers, A.N. Tiwari, Review of progress toward 20% efficiency flexible CIGS solar cells and manufacturing issues of solar modules, in 2012 IEEE 38th Photovoltaic Specialists Conference (PVSC) PART 2 (IEEE, 2012), pp. 1–9
D. Yu, Y.-Q. Yang, Z. Chen, Y. Tao, Y.-F. Liu, Recent progress on thin-film encapsulation technologies for organic electronic devices. Opt. Commun. 362, 43–49 (2016). https://doi.org/10.1016/j.optcom.2015.08.021
T. Leijtens, G.E. Eperon, S. Pathak, A. Abate, M.M. Lee, H.J. Snaith, Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells. Nat. Commun. 4, 2885 (2013). https://doi.org/10.1038/ncomms3885
K.A. Bush, A.F. Palmstrom, Z.J. Yu, M. Boccard, R. Cheacharoen, J.P. Mailoa, D.P. McMeekin, R.L.Z. Hoye, C.D. Bailie, T. Leijtens, I.M. Peters, M.C. Minichetti, N. Rolston, R. Prasanna, S. Sofia, D. Harwood, W. Ma, F. Moghadam, H.J. Snaith, T. Buonassisi, Z.C. Holman, S.F. Bent, M.D. McGehee, 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability. Nat. Energy 2, 17009 (2017). https://doi.org/10.1038/nenergy.2017.9
A. Mei, X. Li, L. Liu, Z. Ku, T. Liu, Y. Rong, M. Xu, M. Hu, J. Chen, Y. Yang, M. Grätzel, H. Han, A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability. Science 1979(345), 295–298 (2014). https://doi.org/10.1126/science.1254763
Z. Wang, Q. Lin, B. Wenger, M.G. Christoforo, Y.-H. Lin, M.T. Klug, M.B. Johnston, L.M. Herz, H.J. Snaith, High irradiance performance of metal halide perovskites for concentrator photovoltaics. Nat. Energy 3, 855–861 (2018). https://doi.org/10.1038/s41560-018-0220-2
S. Seo, S. Jeong, C. Bae, N.-G. Park, H. Shin, Perovskite solar cells with inorganic electron- and hole-transport layers exhibiting long-term (≈ 500 h) stability at 85 °C under continuous 1 sun illumination in ambient air. Adv. Mater. 30, 1801010 (2018). https://doi.org/10.1002/adma.201801010
K. Wojciechowski, T. Leijtens, S. Siprova, C. Schlueter, M.T. Hörantner, J.T.-W. Wang, C.-Z. Li, A.K.-Y. Jen, T.-L. Lee, H.J. Snaith, C 60 as an efficient n-type compact layer in perovskite solar cells. J. Phys. Chem. Lett. 6, 2399–2405 (2015). https://doi.org/10.1021/acs.jpclett.5b00902
T. Leijtens, G.E. Eperon, N.K. Noel, S.N. Habisreutinger, A. Petrozza, H.J. Snaith, Stability of metal halide perovskite solar cells. Adv. Energy Mater. 5, 1500963 (2015). https://doi.org/10.1002/aenm.201500963
J. Burschka, N. Pellet, S.-J. Moon, R. Humphry-Baker, P. Gao, M.K. Nazeeruddin, M. Grätzel, Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature 499, 316–319 (2013). https://doi.org/10.1038/nature12340
H. Tsai, W. Nie, J.-C. Blancon, C.C. Stoumpos, R. Asadpour, B. Harutyunyan, A.J. Neukirch, R. Verduzco, J.J. Crochet, S. Tretiak, L. Pedesseau, J. Even, M.A. Alam, G. Gupta, J. Lou, P.M. Ajayan, M.J. Bedzyk, M.G. Kanatzidis, A.D. Mohite, High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells. Nature 536, 312–316 (2016). https://doi.org/10.1038/nature18306
Q. Sun, C. Shen, D. Wang, T. Zhang, H. Ban, Y. Shen, Z. Zhang, X.-L. Zhang, G. Yang, M. Wang, Efficient and stable large-area perovskite solar cells with inorganic perovskite/carbon quantum dot-graded heterojunction. Research (2021). https://doi.org/10.34133/2021/9845067
Y. Wu, F. Xie, H. Chen, X. Yang, H. Su, M. Cai, Z. Zhou, T. Noda, L. Han, Thermally stable MAPbI 3 perovskite solar cells with efficiency of 19.19% and area over 1 cm2 achieved by additive engineering. Adv. Mater. 29, 1701073 (2017). https://doi.org/10.1002/adma.201701073
E.T. Hoke, D.J. Slotcavage, E.R. Dohner, A.R. Bowring, H.I. Karunadasa, M.D. McGehee, Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics. Chem. Sci. 6, 613–617 (2015). https://doi.org/10.1039/C4SC03141E
H. Tsai, R. Asadpour, J.-C. Blancon, C.C. Stoumpos, O. Durand, J.W. Strzalka, B. Chen, R. Verduzco, P.M. Ajayan, S. Tretiak, J. Even, M.A. Alam, M.G. Kanatzidis, W. Nie, A.D. Mohite, Light-induced lattice expansion leads to high-efficiency perovskite solar cells. Science 1979(360), 67–70 (2018). https://doi.org/10.1126/science.aap8671
D.W. deQuilettes, W. Zhang, V.M. Burlakov, D.J. Graham, T. Leijtens, A. Osherov, V. Bulović, H.J. Snaith, D.S. Ginger, S.D. Stranks, Photo-induced halide redistribution in organic–inorganic perovskite films. Nat. Commun. 7, 11683 (2016). https://doi.org/10.1038/ncomms11683
F.-J. Haug, D. Rudmann, H. Zogg, A.N. Tiwari, Light soaking effects in Cu(In, Ga)Se2 superstrate solar cells. Thin Solid Films 431–432, 431–435 (2003). https://doi.org/10.1016/S0040-6090(03)00187-1
J.-F. Guillemoles, L. Kronik, D. Cahen, U. Rau, A. Jasenek, H.-W. Schock, Stability issues of Cu(In, Ga)Se2-based solar cells. J. Phys. Chem. B 104, 4849–4862 (2000). https://doi.org/10.1021/jp993143k
W. Li, W. Zhang, S. Van Reenen, R.J. Sutton, J. Fan, A.A. Haghighirad, M.B. Johnston, L. Wang, H.J. Snaith, Enhanced UV-light stability of planar heterojunction perovskite solar cells with caesium bromide interface modification. Energy Environ. Sci. 9, 490–498 (2016). https://doi.org/10.1039/C5EE03522H
X. Dong, X. Fang, M. Lv, B. Lin, S. Zhang, Y. Wang, N. Yuan, J. Ding, Method for improving illumination instability of organic–inorganic halide perovskite solar cells. Sci. Bull. (Beijing). 61, 236–244 (2016). https://doi.org/10.1007/s11434-016-0994-1
M. Piralaee, A. Asgari, Nitride/perovskite tandem solar cell with high stability: analytical study of adjusting current matching condition. Int. J. Energy Res. 2023, 1–12 (2023). https://doi.org/10.1155/2023/2925434
M. Koehl, M. Heck, S. Wiesmeier, J. Wirth, Modeling of the nominal operating cell temperature based on outdoor weathering. Sol. Energy Mater. Sol. Cells 95, 1638–1646 (2011). https://doi.org/10.1016/j.solmat.2011.01.020
B. Conings, J. Drijkoningen, N. Gauquelin, A. Babayigit, J. D’Haen, L. D’Olieslaeger, A. Ethirajan, J. Verbeeck, J. Manca, E. Mosconi, F. De Angelis, H. Boyen, Intrinsic thermal instability of methylammonium lead trihalide perovskite. Adv. Energy Mater. (2015). https://doi.org/10.1002/aenm.201500477
A. Dualeh, N. Tétreault, T. Moehl, P. Gao, M.K. Nazeeruddin, M. Grätzel, Effect of annealing temperature on film morphology of organic–inorganic hybrid pervoskite solid-state solar cells. Adv. Funct. Mater. 24, 3250–3258 (2014). https://doi.org/10.1002/adfm.201304022
A. Ciccioli, A. Latini, Thermodynamics and the intrinsic stability of lead halide perovskites CH3 NH3 PbX3. J. Phys. Chem. Lett. 9, 3756–3765 (2018). https://doi.org/10.1021/acs.jpclett.8b00463
K.W. Tan, D.T. Moore, M. Saliba, H. Sai, L.A. Estroff, T. Hanrath, H.J. Snaith, U. Wiesner, Thermally induced structural evolution and performance of mesoporous block copolymer-directed alumina perovskite solar cells. ACS Nano 8, 4730–4739 (2014). https://doi.org/10.1021/nn500526t
R. Azmi, E. Ugur, A. Seitkhan, F. Aljamaan, A.S. Subbiah, J. Liu, G.T. Harrison, M.I. Nugraha, M.K. Eswaran, M. Babics, Y. Chen, F. Xu, T.G. Allen, A.U. Rehman, C.-L. Wang, T.D. Anthopoulos, U. Schwingenschlögl, M. De Bastiani, E. Aydin, S. De Wolf, Damp heat–stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions. Science 1979(376), 73–77 (2022). https://doi.org/10.1126/science.abm5784
N.N. Greenwood, A. Earnshaw, Chemistry of the Elements (Elsevier, London, 2012)
L. Zhao, R.A. Kerner, Z. Xiao, Y.L. Lin, K.M. Lee, J. Schwartz, B.P. Rand, Redox chemistry dominates the degradation and decomposition of metal halide perovskite optoelectronic devices. ACS Energy Lett. 1, 595–602 (2016). https://doi.org/10.1021/acsenergylett.6b00320
N.N. Shlenskaya, N.A. Belich, M. Grätzel, E.A. Goodilin, A.B. Tarasov, Light-induced reactivity of gold and hybrid perovskite as a new possible degradation mechanism in perovskite solar cells. J. Mater. Chem. A Mater. 6, 1780–1786 (2018). https://doi.org/10.1039/C7TA10217H
P. Pistor, A. Ruiz, A. Cabot, V. Izquierdo-Roca, Advanced raman spectroscopy of methylammonium lead iodide: development of a non-destructive characterisation methodology. Sci. Rep. 6, 35973 (2016). https://doi.org/10.1038/srep35973
K. Mahmood, S. Sarwar, M.T. Mehran, Current status of electron transport layers in perovskite solar cells: materials and properties. RSC Adv. 7, 17044–17062 (2017). https://doi.org/10.1039/C7RA00002B
T. Kim, J. Lim, S. Song, Recent Progress and Challenges of Electron Transport Layers in Organic-Inorganic Perovskite Solar Cells. Energies (Basel). 13, 5572 (2020). https://doi.org/10.3390/en13215572
S. Nair, J.V. Gohel, A review on contemporary hole transport materials for perovskite solar cells, in Presented at the (2020)
K. Hwang, Y.-S. Jung, Y.-J. Heo, F.H. Scholes, S.E. Watkins, J. Subbiah, D.J. Jones, D.-Y. Kim, D. Vak, Toward large scale roll-to-roll production of fully printed perovskite solar cells. Adv. Mater. 27, 1241–1247 (2015). https://doi.org/10.1002/adma.201404598
S.-G. Li, K.-J. Jiang, M.-J. Su, X.-P. Cui, J.-H. Huang, Q.-Q. Zhang, X.-Q. Zhou, L.-M. Yang, Y.-L. Song, Inkjet printing of CH3 NH3 PbI3 on a mesoscopic TiO2 film for highly efficient perovskite solar cells. J. Mater. Chem. A Mater. 3, 9092–9097 (2015). https://doi.org/10.1039/C4TA05675B
T.M. Schmidt, T.T. Larsen-Olsen, J.E. Carlé, D. Angmo, F.C. Krebs, Upscaling of perovskite solar cells: fully ambient roll processing of flexible perovskite solar cells with printed back electrodes. Adv. Energy Mater. 5, 1500569 (2015). https://doi.org/10.1002/aenm.201500569
Z. Liu, M. Zhang, X. Xu, L. Bu, W. Zhang, W. Li, Z. Zhao, M. Wang, Y.-B. Cheng, H. He, p-type mesoscopic NiO as an active interfacial layer for carbon counter electrode based perovskite solar cells. Dalton Trans. 44, 3967–3973 (2015). https://doi.org/10.1039/C4DT02904F
F. Di Giacomo, V. Zardetto, A. D’Epifanio, S. Pescetelli, F. Matteocci, S. Razza, A. Di Carlo, S. Licoccia, W.M.M. Kessels, M. Creatore, T.M. Brown, Flexible perovskite photovoltaic modules and solar cells based on atomic layer deposited compact layers and UV-irradiated TiO2 scaffolds on plastic substrates. Adv. Energy Mater. 5, 1401808 (2015). https://doi.org/10.1002/aenm.201401808
S. Dharani, H.K. Mulmudi, N. Yantara, P.T. Thu Trang, N.G. Park, M. Graetzel, S. Mhaisalkar, N. Mathews, P.P. Boix, High efficiency electrospun TiO2 nanofiber based hybrid organic–inorganic perovskite solar cell. Nanoscale 6, 1675–1679 (2014). https://doi.org/10.1039/C3NR04857H
J.H. Noh, S.H. Im, J.H. Heo, T.N. Mandal, S. Seok, Il: chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells. Nano Lett. 13, 1764–1769 (2013). https://doi.org/10.1021/nl400349b
H.J. Snaith, L. Schmidt-Mende, Advances in liquid-electrolyte and solid-state dye-sensitized solar cells. Adv. Mater. 19, 3187–3200 (2007). https://doi.org/10.1002/adma.200602903
K. Mahmood, B.S. Swain, H.S. Jung, Controlling the surface nanostructure of ZnO and Al-doped ZnO thin films using electrostatic spraying for their application in 12% efficient perovskite solar cells. Nanoscale 6, 9127 (2014). https://doi.org/10.1039/C4NR02065K
J.M. Ball, M.M. Lee, A. Hey, H.J. Snaith, Low-temperature processed meso-superstructured to thin-film perovskite solar cells. Energy Environ. Sci. 6, 1739 (2013). https://doi.org/10.1039/c3ee40810h
J.Y. Kim, The stability effect of atomic layer deposition (ALD) of Al2O3 on CH3NH3PbI3 perovskite solar cell fabricated by vapor deposition. Key Eng. Mater. 753, 156–162 (2017). https://doi.org/10.4028/www.scientific.net/KEM.753.156
B.J. Kim, S. Lee, H.S. Jung, Recent progressive efforts in perovskite solar cells toward commercialization. J. Mater. Chem. A Mater. 6, 12215–12236 (2018). https://doi.org/10.1039/C8TA02159G
L. Yang, A.T. Barrows, D.G. Lidzey, T. Wang, Recent progress and challenges of organometal halide perovskite solar cells. Rep. Prog. Phys. 79, 026501 (2016). https://doi.org/10.1088/0034-4885/79/2/026501
Q. Qin, Z. Zhang, Y. Cai, Y. Zhou, H. Liu, X. Lu, X. Gao, L. Shui, S. Wu, J. Liu, Improving the performance of low-temperature planar perovskite solar cells by adding functional fullerene end-capped polyethylene glycol derivatives. J. Power. Sources 396, 49–56 (2018). https://doi.org/10.1016/j.jpowsour.2018.05.091
H. Dong, Z. Wu, J. Xi, X. Xu, L. Zuo, T. Lei, X. Zhao, L. Zhang, X. Hou, A.K.-Y. Jen, Pseudohalide-induced recrystallization engineering for CH3 NH3 PbI3 film and its application in highly efficient inverted planar heterojunction perovskite solar cells. Adv. Funct. Mater. 28, 1704836 (2018). https://doi.org/10.1002/adfm.201704836
Z. Yu, L. Sun, Recent progress on hole-transporting materials for emerging organometal halide perovskite solar cells. Adv. Energy Mater. 5, 1500213 (2015). https://doi.org/10.1002/aenm.201500213
F. Xie, C.-C. Chen, Y. Wu, X. Li, M. Cai, X. Liu, X. Yang, L. Han, Vertical recrystallization for highly efficient and stable formamidinium-based inverted-structure perovskite solar cells. Energy Environ. Sci. 10, 1942–1949 (2017). https://doi.org/10.1039/C7EE01675A
E.H. Anaraki, A. Kermanpur, L. Steier, K. Domanski, T. Matsui, W. Tress, M. Saliba, A. Abate, M. Grätzel, A. Hagfeldt, J.-P. Correa-Baena, Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide. Energy Environ. Sci. 9, 3128–3134 (2016). https://doi.org/10.1039/C6EE02390H
D. Luo, W. Yang, Z. Wang, A. Sadhanala, Q. Hu, R. Su, R. Shivanna, G.F. Trindade, J.F. Watts, Z. Xu, T. Liu, K. Chen, F. Ye, P. Wu, L. Zhao, J. Wu, Y. Tu, Y. Zhang, X. Yang, W. Zhang, R.H. Friend, Q. Gong, H.J. Snaith, R. Zhu, Enhanced photovoltage for inverted planar heterojunction perovskite solar cells. Science 1979(360), 1442–1446 (2018). https://doi.org/10.1126/science.aap9282
J.-Y. Seo, T. Matsui, J. Luo, J.-P. Correa-Baena, F. Giordano, M. Saliba, K. Schenk, A. Ummadisingu, K. Domanski, M. Hadadian, A. Hagfeldt, S.M. Zakeeruddin, U. Steiner, M. Grätzel, A. Abate, Ionic liquid control crystal growth to enhance planar perovskite solar cells efficiency. Adv. Energy Mater. 6, 1600767 (2016). https://doi.org/10.1002/aenm.201600767
X. Crispin, F.L.E. Jakobsson, A. Crispin, P.C.M. Grim, P. Andersson, A.V. Volodin, C. Van Haesendonck, M. Van der Auweraer, W.R. Salaneck, M. Berggren, The origin of the high conductivity of poly (3,4-ethylenedioxythiophene)−poly (styrenesulfonate) (PEDOT−PSS) plastic electrodes. Chemi. Mater. 18, 4354–4360 (2006)
S. Sun, T. Salim, N. Mathews, M. Duchamp, C. Boothroyd, G. Xing, T.C. Sum, Y.M. Lam, The origin of high efficiency in low-temperature solution-processable bilayer organometal halide hybrid solar cells. Energy Environ. Sci. 7, 399–407 (2014). https://doi.org/10.1039/C3EE43161D
J.-Y. Jeng, Y.-F. Chiang, M.-H. Lee, S.-R. Peng, T.-F. Guo, P. Chen, T.-C. Wen, CH3 NH3 PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells. Adv. Mater. 25, 3727–3732 (2013). https://doi.org/10.1002/adma.201301327
Y. Liu, Q. Chen, H.-S. Duan, H. Zhou, Y. Yang, H. Chen, S. Luo, T.-B. Song, L. Dou, Z. Hong, Y. Yang, A dopant-free organic hole transport material for efficient planar heterojunction perovskite solar cells. J. Mater. Chem. A Mater. 3, 11940–11947 (2015). https://doi.org/10.1039/C5TA02502H
J.H. Heo, H.J. Han, D. Kim, T.K. Ahn, S.H. Im, Hysteresis-less inverted CH3 NH3 PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency. Energy Environ. Sci. 8, 1602–1608 (2015). https://doi.org/10.1039/C5EE00120J
S. Shi, Y. Li, X. Li, H. Wang, Advancements in all-solid-state hybrid solar cells based on organometal halide perovskites. Mater. Horiz. 2, 378–405 (2015). https://doi.org/10.1039/C4MH00236A
Q. Wang, C.-C. Chueh, M. Eslamian, A.K.-Y. Jen, Modulation of PEDOT:PSS pH for efficient inverted perovskite solar cells with reduced potential loss and enhanced stability. ACS Appl. Mater. Interfaces 8, 32068–32076 (2016). https://doi.org/10.1021/acsami.6b11757
J. Huang, K.-X. Wang, J.-J. Chang, Y.-Y. Jiang, Q.-S. Xiao, Y. Li, Improving the efficiency and stability of inverted perovskite solar cells with dopamine-copolymerized PEDOT:PSS as a hole extraction layer. J. Mater. Chem. A Mater. 5, 13817–13822 (2017). https://doi.org/10.1039/C7TA02670F
L. Hu, K. Sun, M. Wang, W. Chen, B. Yang, J. Fu, Z. Xiong, X. Li, X. Tang, Z. Zang, S. Zhang, L. Sun, M. Li, Inverted planar perovskite solar cells with a high fill factor and negligible hysteresis by the dual effect of NaCl-Doped PEDOT:PSS. ACS Appl. Mater. Interfaces 9, 43902–43909 (2017). https://doi.org/10.1021/acsami.7b14592
C.-H. Chiang, Z.-L. Tseng, C.-G. Wu, Planar heterojunction perovskite/PC 71 BM solar cells with enhanced open-circuit voltage via a (2/1)-step spin-coating process. J. Mater. Chem. A. 2, 15897–15903 (2014). https://doi.org/10.1039/C4TA03674C
S. Pang, D. Chen, C. Zhang, J. Chang, Z. Lin, H. Yang, X. Sun, J. Mo, H. Xi, G. Han, J. Zhang, Y. Hao, Efficient bifacial semitransparent perovskite solar cells with silver thin film electrode. Sol. Energy Mater. Sol. Cells 170, 278–286 (2017). https://doi.org/10.1016/j.solmat.2017.05.071
Q. Jiang, Y. Zhao, X. Zhang, X. Yang, Y. Chen, Z. Chu, Q. Ye, X. Li, Z. Yin, J. You, Surface passivation of perovskite film for efficient solar cells. Nat. Photonics 13, 460–466 (2019). https://doi.org/10.1038/s41566-019-0398-2
J.W. Jung, C.-C. Chueh, A.K.-Y. Jen, A low-temperature, solution-processable, Cu-doped nickel oxide hole-transporting layer via the combustion method for high-performance thin-film perovskite solar cells. Adv. Mater. 27, 7874–7880 (2015). https://doi.org/10.1002/adma.201503298
N. Arora, M.I. Dar, A. Hinderhofer, N. Pellet, F. Schreiber, S.M. Zakeeruddin, M. Grätzel, Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%. Science 1979(358), 768–771 (2017). https://doi.org/10.1126/science.aam5655
W. Sun, Y. Li, S. Ye, H. Rao, W. Yan, H. Peng, Y. Li, Z. Liu, S. Wang, Z. Chen, L. Xiao, Z. Bian, C. Huang, High-performance inverted planar heterojunction perovskite solar cells based on a solution-processed CuOx hole transport layer. Nanoscale 8, 10806–10813 (2016). https://doi.org/10.1039/C6NR01927G
H. Zhang, H. Wang, W. Chen, A.K.-Y. Jen, CuGaO2: a promising inorganic hole-transporting material for highly efficient and stable perovskite solar cells. Adv. Mater. 29, 1604984 (2017). https://doi.org/10.1002/adma.201604984
F. Igbari, M. Li, Y. Hu, Z.-K. Wang, L.-S. Liao, A room-temperature CuAlO2 hole interfacial layer for efficient and stable planar perovskite solar cells. J. Mater. Chem. A Mater. 4, 1326–1335 (2016). https://doi.org/10.1039/C5TA07957H
M. Huangfu, Y. Shen, G. Zhu, K. Xu, M. Cao, F. Gu, L. Wang, Copper iodide as inorganic hole conductor for perovskite solar cells with different thickness of mesoporous layer and hole transport layer. Appl. Surf. Sci. 357, 2234–2240 (2015). https://doi.org/10.1016/j.apsusc.2015.09.215
H. Sung, N. Ahn, M.S. Jang, J.-K. Lee, H. Yoon, N.-G. Park, M. Choi, Transparent conductive oxide-free graphene-based perovskite solar cells with over 17% efficiency. Adv. Energy Mater. 6, 1501873 (2016). https://doi.org/10.1002/aenm.201501873
E. Singh, K.S. Kim, G.Y. Yeom, H.S. Nalwa, Atomically thin-layered molybdenum disulfide (MoS2) for bulk-heterojunction solar cells. ACS Appl. Mater. Interfaces 9, 3223–3245 (2017). https://doi.org/10.1021/acsami.6b13582
H. Rao, W. Sun, S. Ye, W. Yan, Y. Li, H. Peng, Z. Liu, Z. Bian, C. Huang, Solution-processed CuS NPs as an inorganic hole-selective contact material for inverted planar perovskite solar cells. ACS Appl. Mater. Interfaces 8, 7800–7805 (2016). https://doi.org/10.1021/acsami.5b12776
D. Yao, Interfacial and Compositional Engineering of Perovskite Solar Cells for Enhanced Device Performance and Stability (Springer, London, 2020)
A.A. Mamun, T.T. Ava, K. Zhang, H. Baumgart, G. Namkoong, New PCBM/carbon based electron transport layer for perovskite solar cells. Phys. Chem. Chem. Phys. 19, 17960–17966 (2017). https://doi.org/10.1039/C7CP02523H
K. Aitola, K. Sveinbjörnsson, J.-P. Correa-Baena, A. Kaskela, A. Abate, Y. Tian, E.M.J. Johansson, M. Grätzel, E.I. Kauppinen, A. Hagfeldt, G. Boschloo, Carbon nanotube-based hybrid hole-transporting material and selective contact for high efficiency perovskite solar cells. Energy Environ. Sci. 9, 461–466 (2016). https://doi.org/10.1039/C5EE03394B
J. Cao, Y.-M. Liu, X. Jing, J. Yin, J. Li, B. Xu, Y.-Z. Tan, N. Zheng, Well-defined thiolated nanographene as hole-transporting material for efficient and stable perovskite solar cells. J. Am. Chem. Soc. 137, 10914–10917 (2015). https://doi.org/10.1021/jacs.5b06493
R. Singh, H.K. Jun, A.K. Arof, Activated carbon as back contact for HTM-free mixed cation perovskite solar cell. Phase Transit. 91, 1268–1276 (2018). https://doi.org/10.1080/01411594.2018.1527914
T.H. Chowdhury, Md. Akhtaruzzaman, Md.E. Kayesh, R. Kaneko, T. Noda, J.-J. Lee, A. Islam, Low temperature processed inverted planar perovskite solar cells by r-GO/CuSCN hole-transport bilayer with improved stability. Sol. Energy 171, 652–657 (2018). https://doi.org/10.1016/j.solener.2018.07.022
J.-S. Yeo, C.-H. Lee, D. Jang, S. Lee, S.M. Jo, H.-I. Joh, D.-Y. Kim, Reduced graphene oxide-assisted crystallization of perovskite via solution-process for efficient and stable planar solar cells with module-scales. Nano Energy 30, 667–676 (2016). https://doi.org/10.1016/j.nanoen.2016.10.065
Z. Zhou, X. Li, M. Cai, F. Xie, Y. Wu, Z. Lan, X. Yang, Y. Qiang, A. Islam, L. Han, Stable inverted planar perovskite solar cells with low-temperature-processed hole-transport bilayer. Adv. Energy Mater. 7, 1700763 (2017). https://doi.org/10.1002/aenm.201700763
M. Que, B. Zhang, J. Chen, X. Yin, S. Yun, Carbon-based electrodes for perovskite solar cells. Mater Adv. 2, 5560–5579 (2021). https://doi.org/10.1039/D1MA00352F
L.Q. Zhang, X.W. Zhang, Z.G. Yin, Q. Jiang, X. Liu, J.H. Meng, Y.J. Zhao, H.L. Wang, Highly efficient and stable planar heterojunction perovskite solar cells via a low temperature solution process. J. Mater. Chem. A Mater. 3, 12133–12138 (2015). https://doi.org/10.1039/C5TA01898F
T.A. Chowdhury, M.A. Bin Zafar, M. Sajjad-Ul Islam, M. Shahinuzzaman, M.A. Islam, M.U. Khandaker, Stability of perovskite solar cells: issues and prospects. RSC Adv. 13, 1787–1810 (2023). https://doi.org/10.1039/D2RA05903G
J. Zhu, Y. Liu, B. He, W. Zhang, L. Cui, S. Wang, H. Chen, Y. Duan, Q. Tang, Efficient interface engineering of N,N′-Dicyclohexylcarbodiimide for stable HTMs-free CsPbBr 3 perovskite solar cells with 10.16%-efficiency. Chem. Eng. J. 428, 131950 (2022). https://doi.org/10.1016/j.cej.2021.131950
W.-Q. Wu, Q. Wang, Y. Fang, Y. Shao, S. Tang, Y. Deng, H. Lu, Y. Liu, T. Li, Z. Yang, A. Gruverman, J. Huang, Molecular doping enabled scalable blading of efficient hole-transport-layer-free perovskite solar cells. Nat. Commun. 9, 1625 (2018). https://doi.org/10.1038/s41467-018-04028-8
Q. Jiang, X. Zhang, J. You, SnO2: a wonderful electron transport layer for perovskite solar cells. Small 14, 1801154 (2018). https://doi.org/10.1002/smll.201801154
G. Xing, N. Mathews, S. Sun, S.S. Lim, Y.M. Lam, M. Grätzel, S. Mhaisalkar, T.C. Sum, Long-range balanced electron- and hole-transport lengths in organic–inorganic CH3 NH3 PbI3. Science 1979(342), 344–347 (2013). https://doi.org/10.1126/science.1243167
F. Li, C. Wang, P. Liu, Y. Xiao, L. Bai, F. Qi, X. Hou, H. Zhang, Y. Wang, S. Wang, X.-Z. Zhao, Fully air-processed carbon-based efficient hole conductor free planar heterojunction perovskite solar cells with high reproducibility and stability. Solar RRL. 3, 1800297 (2019). https://doi.org/10.1002/solr.201800297
Y. Yang, Z. Liu, W.K. Ng, L. Zhang, H. Zhang, X. Meng, Y. Bai, S. Xiao, T. Zhang, C. Hu, K.S. Wong, S. Yang, An ultrathin ferroelectric perovskite oxide layer for high-performance hole transport material free carbon based halide perovskite solar cells. Adv. Funct. Mater. 29, 1806506 (2019). https://doi.org/10.1002/adfm.201806506
F. Wan, X. Qiu, H. Chen, Y. Liu, H. Xie, J. Shi, H. Huang, Y. Yuan, Y. Gao, C. Zhou, Accelerated electron extraction and improved UV stability of TiO2 based perovskite solar cells by SnO2 based surface passivation. Org. Electron. 59, 184–189 (2018). https://doi.org/10.1016/j.orgel.2018.05.008
Y. Wang, H. Zhao, Y. Mei, H. Liu, S. Wang, X. Li, Carbon nanotube bridging method for hole transport layer-free paintable carbon-based perovskite solar cells. ACS Appl. Mater. Interfaces 11, 916–923 (2019). https://doi.org/10.1021/acsami.8b18530
Y. Xiao, C. Wang, K.K. Kondamareddy, N. Cheng, P. Liu, Y. Qiu, F. Qi, S. Kong, W. Liu, X.-Z. Zhao, Efficient electron transport scaffold made up of submicron TiO2 spheres for high-performance hole-transport material free perovskite solar cells. ACS Appl. Energy Mater. (2018). https://doi.org/10.1021/acsaem.8b01038
X. Zhou, L. Zhang, H. Hu, Z. Jiang, D. Wang, J. Chen, Y. Li, J. Wu, Y. Zhang, M. Zhang, C. Liu, Y. Peng, X. Wang, B. Xu, Highly efficient and stable hole-transport-layer-free inverted perovskite solar cells achieved 22% efficiency through p-type molecular synergistic doping. Nano Energy 104, 107988 (2022). https://doi.org/10.1016/j.nanoen.2022.107988
Z. Zhou, Z. Qiang, T. Sakamaki, I. Takei, R. Shang, E. Nakamura, Organic/inorganic hybrid p-type semiconductor doping affords hole transporting layer free thin-film perovskite solar cells with high stability. ACS Appl. Mater. Interfaces 11, 22603–22611 (2019). https://doi.org/10.1021/acsami.9b06513
S. Ye, H. Rao, Z. Zhao, L. Zhang, H. Bao, W. Sun, Y. Li, F. Gu, J. Wang, Z. Liu, Z. Bian, C. Huang, A breakthrough efficiency of 19.9% obtained in inverted perovskite solar cells by using an efficient trap state passivator Cu(thiourea)I. J. Am. Chem. Soc. 139, 7504–7512 (2017). https://doi.org/10.1021/jacs.7b01439
S. Ye, H. Rao, W. Yan, Y. Li, W. Sun, H. Peng, Z. Liu, Z. Bian, Y. Li, C. Huang, A strategy to simplify the preparation process of perovskite solar cells by co-deposition of a hole-conductor and a perovskite layer. Adv. Mater. 28, 9648–9654 (2016). https://doi.org/10.1002/adma.201603850
Y. Li, S. Ye, W. Sun, W. Yan, Y. Li, Z. Bian, Z. Liu, S. Wang, C. Huang, Hole-conductor-free planar perovskite solar cells with 16.0% efficiency. J. Mater. Chem. A Mater. 3, 18389–18394 (2015). https://doi.org/10.1039/C5TA05989E
Z. Zhou, S. Pang, Highly efficient inverted hole-transport-layer-free perovskite solar cells. J. Mater. Chem. A Mater. 8, 503–512 (2020). https://doi.org/10.1039/C9TA10694D
H. Yu, F. Wang, F. Xie, W. Li, J. Chen, N. Zhao, The role of chlorine in the formation process of “CH3 NH3 PbI3–x Clx” perovskite. Adv. Funct. Mater. (2014). https://doi.org/10.1002/adfm.201401872
W. Nie, H. Tsai, R. Asadpour, J.-C. Blancon, A.J. Neukirch, G. Gupta, J.J. Crochet, M. Chhowalla, S. Tretiak, M.A. Alam, H.-L. Wang, A.D. Mohite, High-efficiency solution-processed perovskite solar cells with millimeter-scale grains. Science 1979(347), 522–525 (2015). https://doi.org/10.1126/science.aaa0472
Y. Liu, J. Guo, E. Zhu, L. Liao, S.-J. Lee, M. Ding, I. Shakir, V. Gambin, Y. Huang, X. Duan, Approaching the Schottky–Mott limit in van der Waals metal–semiconductor junctions. Nature 557, 696–700 (2018). https://doi.org/10.1038/s41586-018-0129-8
M. Pfeiffer, A. Beyer, T. Fritz, K. Leo, Controlled doping of phthalocyanine layers by cosublimation with acceptor molecules: a systematic Seebeck and conductivity study. Appl. Phys. Lett. 73, 3202–3204 (1998). https://doi.org/10.1063/1.122718
K. Schutt, P.K. Nayak, A.J. Ramadan, B. Wenger, Y. Lin, H.J. Snaith, Overcoming zinc oxide interface instability with a methylammonium-free perovskite for high-performance solar cells. Adv. Funct. Mater. 29, 1900466 (2019). https://doi.org/10.1002/adfm.201900466
M. Beygisangchin, S. Abdul Rashid, S. Shafie, A.R. Sadrolhosseini, H.N. Lim, Preparations, properties, and applications of polyaniline and polyaniline thin films—a review. Polymers (Basel) 13, 2003 (2021). https://doi.org/10.3390/polym13122003
M. Beygisangchin, A. Hossein Baghdadi, S. Kartom Kamarudin, S. Abdul Rashid, J. Jakmunee, N. Shaari, Recent progress in polyaniline and its composites: synthesis, properties, and applications. Eur. Polym. J. (2024). https://doi.org/10.1016/j.eurpolymj.2024.112948
I. Letchumanan, R. Mohamad Yunus, M.S. Mastar@Masdar, M. Beygisangchin, S.K. Kamarudin, N.A. Karim, Modified surface nano-topography for renewable energy applications for promising cobalt-based nanomaterials towards dual-functional electrocatalyst. Int. J. Hydrog. Energy 59, 1518–1539 (2024). https://doi.org/10.1016/j.ijhydene.2024.01.316
S.A.L. Weber, I.M. Hermes, S.-H. Turren-Cruz, C. Gort, V.W. Bergmann, L. Gilson, A. Hagfeldt, M. Graetzel, W. Tress, R. Berger, How the formation of interfacial charge causes hysteresis in perovskite solar cells. Energy Environ. Sci. 11, 2404–2413 (2018). https://doi.org/10.1039/C8EE01447G
A. Uddin, H. Yi, Progress and challenges of SnO2 electron transport layer for perovskite solar cells: a critical review. Solar RRL. 6, 2100983 (2022). https://doi.org/10.1002/solr.202100983
L. Huang, J. Xu, X. Sun, Y. Du, H. Cai, J. Ni, J. Li, Z. Hu, J. Zhang, Toward revealing the critical role of perovskite coverage in highly efficient electron-transport layer-free perovskite solar cells: an energy band and equivalent circuit model perspective. ACS Appl. Mater. Interfaces 8, 9811–9820 (2016). https://doi.org/10.1021/acsami.6b00544
Q. Han, J. Ding, Y. Bai, T. Li, J.-Y. Ma, Y.-X. Chen, Y. Zhou, J. Liu, Q.-Q. Ge, J. Chen, J.T. Glass, M.J. Therien, J. Liu, D.B. Mitzi, J.-S. Hu, Carrier dynamics engineering for high-performance electron-transport-layer-free perovskite photovoltaics. Chem. 4, 2405–2417 (2018). https://doi.org/10.1016/j.chempr.2018.08.004
C.W. Jang, D.H. Shin, S.-H. Choi, Photostable electron-transport-layer-free flexible graphene quantum dots/perovskite solar cells by employing bathocuproine interlayer. J. Alloys Compd. 886, 161355 (2021). https://doi.org/10.1016/j.jallcom.2021.161355
W. Wu, J. Liao, J. Zhong, Y. Xu, L. Wang, J. Huang, Suppressing interfacial charge recombination in electron-transport-layer-free perovskite solar cells to give an efficiency exceeding 21%. Angew. Chem. 132, 21166–21173 (2020). https://doi.org/10.1002/ange.202005680
L. Huang, S. Bu, D. Zhang, R. Peng, Q. Wei, Z. Ge, J. Zhang, Schottky/p–n cascade heterojunction constructed by intentional n-type doping perovskite toward efficient electron layer-free perovskite solar cells. Solar RRL. 3, 1800274 (2019). https://doi.org/10.1002/solr.201800274
J. Liao, W. Wu, Y. Jiang, D. Kuang, L. Wang, Maze-like halide perovskite films for efficient electron transport layer-free perovskite solar cells. Solar RRL. 3, 1800268 (2019). https://doi.org/10.1002/solr.201800268
P. Zhao, M. Han, W. Yin, X. Zhao, S.G. Kim, Y. Yan, M. Kim, Y.J. Song, N.G. Park, H.S. Jung, Insulated interlayer for efficient and photostable electron-transport-layer-free perovskite solar cells. ACS Appl. Mater. Interfaces 10, 10132–10140 (2018). https://doi.org/10.1021/acsami.8b00021
J. Pascual, I. Kosta, E. Palacios-Lidon, A. Chuvilin, G. Grancini, M.K. Nazeeruddin, H.J. Grande, J.L. Delgado, R. Tena-Zaera, Co-solvent effect in the processing of the perovskite: fullerene blend films for electron transport layer-free solar cells. J. Phys. Chem. C 122, 2512–2520 (2018). https://doi.org/10.1021/acs.jpcc.7b11141
X. Wei, M. Zhang, X. Liu, F. Chen, X. Lei, H. Liu, F. Meng, H. Zeng, S. Yang, J. Liu, Semitransparent CH3 NH3 PbI3 films achieved by solvent engineering for annealing- and electron transport layer-free planar perovskite solar cells. Solar RRL. 2, 1700222 (2018). https://doi.org/10.1002/solr.201700222
R. Sandoval-Torrientes, J. Pascual, I. García-Benito, S. Collavini, I. Kosta, R. Tena-Zaera, N. Martín, J.L. Delgado, Modified fullerenes for efficient electron transport layer-free perovskite/fullerene blend-based solar cells. Chemsuschem 10, 2023–2029 (2017). https://doi.org/10.1002/cssc.201700180
P. Cui, D. Wei, J. Ji, D. Song, Y. Li, X. Liu, J. Huang, T. Wang, J. You, M. Li, Highly efficient electron-selective layer free perovskite solar cells by constructing effective p–n heterojunction. Solar RRL. 1, 1600027 (2017). https://doi.org/10.1002/solr.201600027
J. Pascual, I. Kosta, T. Tuyen Ngo, A. Chuvilin, G. Cabanero, H.J. Grande, E.M. Barea, I. Mora-Seró, J.L. Delgado, R. Tena-Zaera, Electron transport layer-free solar cells based on perovskite-fullerene blend films with enhanced performance and stability. Chemsuschem 9, 2679–2685 (2016). https://doi.org/10.1002/cssc.201600940
T. Shi, J. Chen, J. Zheng, X. Li, B. Zhou, H. Cao, Y. Wang, Ti/Au cathode for electronic transport material-free organic–inorganic hybrid perovskite solar cells. Sci. Rep. 6, 1–6 (2016)
W. Ke, G. Fang, J. Wan, H. Tao, Q. Liu, L. Xiong, P. Qin, J. Wang, H. Lei, G. Yang, M. Qin, X. Zhao, Y. Yan, Efficient hole-blocking layer-free planar halide perovskite thin-film solar cells. Nat. Commun. 6, 6700 (2015). https://doi.org/10.1038/ncomms7700
N.F. Rostan, S. Sepeai, R. Mohamad Yunus, N. Ahmad Ludin, M.A. Mat Teridi, M.A. Ibrahim, K. Sopian, Optoelectronic and morphology properties of perovskite/silicon interface layer for tandem solar cell application. Surf. Interface Anal. 52, 422–432 (2020). https://doi.org/10.1002/sia.6750
C.D. Bailie, M.D. McGehee, High-efficiency tandem perovskite solar cells. MRS Bull. 40, 681–686 (2015). https://doi.org/10.1557/mrs.2015.167
T.P. White, N.N. Lal, K.R. Catchpole, Tandem solar cells based on high-efficiency c-Si bottom cells: top cell requirements for > 30% efficiency. IEEE J Photovolt. 4, 208–214 (2014). https://doi.org/10.1109/JPHOTOV.2013.2283342
Q. Wali, N.K. Elumalai, Y. Iqbal, A. Uddin, R. Jose, Tandem perovskite solar cells. Renew. Sustain. Energy Rev. 84, 89–110 (2018). https://doi.org/10.1016/j.rser.2018.01.005
S.M. Bedair, M.F. Lamorte, J.R. Hauser, A two-junction cascade solar-cell structure. Appl. Phys. Lett. 34, 38–39 (1979). https://doi.org/10.1063/1.90576
A.D. Vos, Detailed balance limit of the efficiency of tandem solar cells. J. Phys. D Appl. Phys. 13, 839–846 (1980). https://doi.org/10.1088/0022-3727/13/5/018
M. Beygisangchin, S.A. Rashid, H.N. Lim, S. Shafie, A.R. Sadrolhosseini, Effect of toluene-4-sulfonic acid monohydrate concentrations on properties of polyaniline for pyrene detection via photoluminescence spectroscopy. Opt Mater (Amst). 131, 112711 (2022). https://doi.org/10.1016/j.optmat.2022.112711
M. Beygisangchin, S. Abdul Rashid, S. Shafie, H.N. Lim, Evaluation of N-methyl-2-pyrrolidone concentration on synthesis and characterization of 1% toluene-4-sulfonic acid monohydrate doped polyaniline film. J. Inorg. Organomet. Polym. Mater. 33, 1246–1260 (2023). https://doi.org/10.1007/s10904-023-02574-3
M. Beygisangchin, S. Abdul Rashid, S. Shafie, A.R. Sadrolhosseini, Polyaniline synthesized by different dopants for fluorene detection via photoluminescence spectroscopy. Materials. 14, 7382 (2021). https://doi.org/10.3390/ma14237382
M. Beygisangchin, S.A. Rashid, S. Shafie, Investigation on polyaniline synthesised by camphor sulphonic acid; optical, thermal, structural, and electrical properties. Int. J. Nanotechnol. 20, 998–1009 (2023). https://doi.org/10.1504/IJNT.2023.135814
S. Essig, S. Ward, M.A. Steiner, D.J. Friedman, J.F. Geisz, P. Stradins, D.L. Young, Progress towards a 30% efficient GaInP/Si tandem solar cell. Energy Proc. 77, 464–469 (2015). https://doi.org/10.1016/j.egypro.2015.07.066
S. Essig, J. Benick, M. Schachtner, A. Wekkeli, M. Hermle, F. Dimroth, Wafer-bonded GaInP/GaAs//Si Solar cells with 30% efficiency under concentrated sunlight. IEEE J. Photovolt. 5, 977–981 (2015). https://doi.org/10.1109/JPHOTOV.2015.2400212
I. Tobías, A. Luque, Ideal efficiency of monolithic, series-connected multijunction solar cells. Prog. Photovolt. Res. Appl. 10, 323–329 (2002). https://doi.org/10.1002/pip.427
H. Cotal, C. Fetzer, J. Boisvert, G. Kinsey, R. King, P. Hebert, H. Yoon, N. Karam, III–V multijunction solar cells for concentrating photovoltaics. Energy Environ. Sci. 2, 174–192 (2009). https://doi.org/10.1039/B809257E
M.A. Green, M.J. Keevers, I. Thomas, J.B. Lasich, K. Emery, R.R. King, 40% efficient sunlight to electricity conversion. Prog. Photovolt. Res. Appl. 23, 685–691 (2015). https://doi.org/10.1002/pip.2612
S.P. Bremner, M.Y. Levy, C.B. Honsberg, Analysis of tandem solar cell efficiencies under AM1.5G spectrum using a rapid flux calculation method. Prog. Photovolt. Res. Appl. 16, 225–233 (2008). https://doi.org/10.1002/pip.799
M. Okil, A. Shaker, I.S. Ahmed, T.M. Abdolkader, M.S. Salem, Design and analysis of Sb2S3/Si thin film tandem solar cell. Sol. Energy Mater. Sol. Cells 253, 112210 (2023). https://doi.org/10.1016/j.solmat.2023.112210
M. Habibi, F. Zabihi, M.R. Ahmadian-Yazdi, M. Eslamian, Progress in emerging solution-processed thin film solar cells—part II: perovskite solar cells. Renew. Sustain. Energy Rev. 62, 1012–1031 (2016). https://doi.org/10.1016/j.rser.2016.05.042
A. Fakharuddin, L. Schmidt-Mende, G. Garcia-Belmonte, R. Jose, I. Mora-Sero, Interfaces in perovskite solar cells. Adv. Energy Mater. 7, 1700623 (2017). https://doi.org/10.1002/aenm.201700623
Z.H. Bakr, Q. Wali, A. Fakharuddin, L. Schmidt-Mende, T.M. Brown, R. Jose, Advances in hole transport materials engineering for stable and efficient perovskite solar cells. Nano Energy 34, 271–305 (2017). https://doi.org/10.1016/j.nanoen.2017.02.025
Q. Wang, C. Chueh, T. Zhao, J. Cheng, M. Eslamian, W.C.H. Choy, A.K.-Y. Jen, Effects of self-assembled monolayer modification of nickel oxide nanoparticles layer on the performance and application of inverted perovskite solar cells. Chemsuschem 10, 3794–3803 (2017). https://doi.org/10.1002/cssc.201701262
F. Di Giacomo, A. Fakharuddin, R. Jose, T.M. Brown, Progress, challenges and perspectives in flexible perovskite solar cells. Energy Environ. Sci. 9, 3007–3035 (2016). https://doi.org/10.1039/C6EE01137C
S. De Wolf, J. Holovsky, S.-J. Moon, P. Löper, B. Niesen, M. Ledinsky, F.-J. Haug, J.-H. Yum, C. Ballif, Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance. J. Phys. Chem. Lett. 5, 1035–1039 (2014). https://doi.org/10.1021/jz500279b
G.E. Eperon, S.D. Stranks, C. Menelaou, M.B. Johnston, L.M. Herz, H.J. Snaith, Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells. Energy Environ. Sci. 7, 982 (2014). https://doi.org/10.1039/c3ee43822h
A.R. Sadrolhosseini, M. Beygisangchin, S. Shafie, S.A. Rashid, H. Nezakati, Laser ablated titanium oxide nanoparticles in carbon quantum dots solution for detection of sugar using fluorescence spectroscopy. Mater. Res. Express. 8, 105003 (2021). https://doi.org/10.1088/2053-1591/abdf0f
A.R. Sadrolhosseini, G. Krishnan, S. Safie, M. Beygisangchin, S.A. Rashid, S.W. Harun, Enhancement of the fluorescence property of carbon quantum dots based on laser ablated gold nanoparticles to evaluate pyrene. Opt. Mater. Express 10, 2227 (2020). https://doi.org/10.1364/OME.396914
F. Usman, J.O. Dennis, A.I. Aljameel, M.K.M. Ali, O. Aldaghri, K.H. Ibnaouf, Z.U. Zango, M. Beygisangchin, A. Alsadig, F. Meriaudeau, Plasmonic biosensors for the detection of lung cancer biomarkers: a review. Chemosensors 9, 326 (2021). https://doi.org/10.3390/chemosensors9110326
M. Filipič, P. Löper, B. Niesen, S. De Wolf, J. Krč, C. Ballif, M. Topič, CH_3NH_3PbI_3 perovskite/silicon tandem solar cells: characterization based optical simulations. Opt. Express 23, A263 (2015). https://doi.org/10.1364/OE.23.00A263
P. Loper, B. Niesen, S.-J. Moon, S. Martin de Nicolas, J. Holovsky, Z. Remes, M. Ledinsky, F.-J. Haug, J.-H. Yum, S. De Wolf, C. Ballif, Organic–inorganic halide perovskites: perspectives for silicon-based tandem solar cells. IEEE J Photovolt. 4, 1545–1551 (2014). https://doi.org/10.1109/JPHOTOV.2014.2355421
N.N. Lal, T.P. White, K.R. Catchpole, Optics and light trapping for tandem solar cells on silicon. IEEE J. Photovolt. 4, 1380–1386 (2014). https://doi.org/10.1109/JPHOTOV.2014.2342491
N. Kano, Attractive quality and must-be quality. J. Jpn. Soc. Qual. Control. 31, 147–156 (1984)
P.-L. Qin, Q. He, C. Chen, X.-L. Zheng, G. Yang, H. Tao, L.-B. Xiong, L. Xiong, G. Li, G.-J. Fang, High-performance rigid and flexible perovskite solar cells with low-temperature solution-processable binary metal oxide hole-transporting materials. Solar RRL. 1, 1700058 (2017). https://doi.org/10.1002/solr.201700058
Acknowledgements
The authors would like to thank the Ministry of Higher Education of Malaysia under HiCoE SelFuel UKM:AKR42 and Universiti Kebangsaan Malaysia for supporting this researchproject through RIA 2 (Modal Insan Penyelidikan) and DIP-2021-025.
Author information
Authors and Affiliations
Contributions
Mahnoush Beygisangchin: Conceptualization, Methodology, Investigations, Software, Writing- Original draft preparation Writing—Review and Editing. Siti Kartom Kamarudin: Investigations, Software, Writing—Review and Editing. Akrajas Ali Umar: Conceptualization, Methodology, Software, Supervision, Writing—Review and Editing. Bita Farhadi: Visualization, Investigation, Supervision, Writing- Reviewing and Editing. Amir Hossein Baghdadi: Supervision, Methodology, Validation. Iswary Letchumanan: Validation, Investigations, Methodology. Armin Rajabi: Investigation, Writing- Reviewing and Editing. Abang Anuar Ehsan: Validation, Software. Norazuwana Shaari: Validation, Software, Methodology.
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Beygisangchin, M., Kamarudin, S.K., Umar, A.A. et al. Advancements in configuration structures and fabrication techniques for achieving stability in perovskite solar cells: a comprehensive review. J. Korean Ceram. Soc. (2024). https://doi.org/10.1007/s43207-024-00401-0
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s43207-024-00401-0