Abstract
Electrohydrodynamic (EHD) convective drying is a non-thermal energy-efficient technology to preserve heat-sensitive materials by dehydration. A high-voltage electrode is used to induce corona wind that increases convective heat and mass transfer in the material and air interface. A chamber used for EHD drying with a wire-to-plate configuration and additional air crossflow was modeled considering the finite element method in COMSOL Multiphysics (v.6.1). The concepts of electrostatics, turbulent flow, heat transfer in fluids and moisture and energy transport physics were combined iteratively to solve and predict the electric field strength, airflow, convective heat transfer coefficient and moisture removal. Different electric potential and air crossflow velocities were tested and their impact on the drying rate was quantified. Combining high voltage (0, 10, 15 and 20 kV) and air crossflow velocity (0, 1, and 2 m/s) was found to have a significant effect on the convective heat transfer coefficient and moisture removal; however, the increase in one of the drying factors had a low effect on drying time. The main results show that the proposed model can adequately simulate the EHD airflow phenomena and the drying process and can be used for product quality improvement, energy efficiency analysis and optimization studies.
Similar content being viewed by others
Data Availability
The datasets generated and analyzed during the current study are available from the corresponding author upon reasonable request.
References
Aregawi W, Defraeye T, Saneinejad S, Vontobel P, Lehmann E, Carmeliet J, Derome D, Verboven P, Nicolai B (2013) Dehydration of apple tissue: intercomparison of neutron tomography with numerical modelling. Int J Heat Mass Transfer 67:173–182. https://doi.org/10.1016/j.ijheatmasstransfer.2013.08.017
Ayuttaya SSN, Chaktranond C, Rattanadecho P (2013) Numerical analysis of electric force influence on heat transfer in a channel flow (theory based on saturated porous medium approach). Int J Heat Mass Transfer 64:361–374. https://doi.org/10.1016/j.ijheatmasstransfer.2013.04.010
Bonazzi C, Dumoulin E (2014) Quality changes in food materials as influenced by drying processes. Modern Dry Technol 3(4):1–20. https://doi.org/10.1002/9783527631728.ch14
COMSOL Multiphysics. Reference manual, 2023. Available in: https://doc.comsol.com/6.1/doc/com.comsol.help.comsol/COMSOL_ReferenceManual.pdf. Accessed 25 Aug 2023
Dalvi-Isfahan M, Havet M, Hamdami N, Le-Bail A (2023) Recent advances of high voltage electric field technology and its application in food processing: a review with a focus on corona discharge and static electric field. J Food Eng 353:111551. https://doi.org/10.1016/j.jfoodeng.2023.111551
Datta AK (2008) Status of physics-based models in the design of food products, processes, and equipment. Compr Rev Food Sci Food Saf 7:121–129. https://doi.org/10.1111/j.1541-4337.2007.00030.x
Defraeye T, Martynenko A (2018) Electrohydrodynamic drying of food: New insights from conjugate modeling. J Clean Prod 198:269–284. https://doi.org/10.1016/j.jclepro.2018.06.250
Defraeye T, Radu A (2017) Convective drying of fruit: a deeper look at the air-material interface by conjugate modeling. Int J Heat Mass Transfer 108:1610–1622. https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.002
Defraeye T, Verboven P (2017) Convective drying of fruit: role and impact of moisture transport properties in modelling. J Food Eng 193:95–107. https://doi.org/10.1016/j.jfoodeng.2016.08.013
Defraeye T, Blocken B, Carmeliet J (2012) Analysis of convective heat and mass transfer coefficients for convective drying of a porous flat plate by conjugate modelling. Int J Heat Mass Transfer 55:112–124. https://doi.org/10.1016/j.ijheatmasstransfer.2011.08.047
Elmizadeh A, Shahedi M, Hamdami N (2017) Comparison of electrohydrodynamic and hot-air drying of the quince slices. Innovat Food Sci Emerg Technol 43:130–135. https://doi.org/10.1016/j.ifset.2017.07.030
Fontan CF, Chirife J, Sancho E, Iglesias HA (1982) Analysis of a model for water sorption phenomena in foods. J Food Sci 47:1590–1594. https://doi.org/10.1111/j.1365-2621.1982.tb04989.x
Gyurik L, Egedy A, Zou J, Miskolczi N, Ulbert Z, Yang H (2019) Hydrodynamic modelling of a two-stage biomass gasification reactor. J Energy Inst 92(3):403e12. https://doi.org/10.1016/j.joei.2018.05.007
Iranshahi K, Martynenko A, Defraeye T (2020) Cutting-down the energy consumption of electrohydrodynamic. Energy 208:118168. https://doi.org/10.1016/j.energy.2020.118168
Jewell-Larsen NE, Karpov SV, Krichtafovitch IA, Jayanty V, Hsu C, Mamishev AV (2008) Modeling of corona-induced electrohydrodynamic flow with COMSOL multiphysics. Proceedings of the 2008 ESA Annual Meeting on Electrostatics; Paper E1:1–13
Knoerzer K, Buckow R, Trujillo FJ (2015) Multiphysics simulation of innovative food processing technologies. Food Eng Rev 7:64–81. https://doi.org/10.1007/s12393-014-9098-3
Landau LD, Lifshitz EM (1963) Electrohydrodynamic of continuous media. Pergamon, New York
Marra F, De Bonis MV, Ruocco G (2010) Combined microwaves and convection heating: a conjugate approach. J Food Eng 97:31e39. https://doi.org/10.1016/j.jfoodeng.2009.09.012
Martynenko A, Astatkie T, Defraeye T (2020) The role of convection in electrohydrodynamic drying. J Food Eng 271:109777. https://doi.org/10.1016/j.jfoodeng.2019.109777
Mirzaei-Baktash H, Hamdami N, Torabi P, Fallah-Joshaqani S, Dalvi-Isfahan M (2022) Impact of different pretreatments on drying kinetics and quality of button mushroom slices dried by hot-air or electrohydrodynamic drying. LWT 15:112894. https://doi.org/10.1016/j.lwt.2021.112894
Ni J, Ding C, Zhang Y, Song Z (2020) Impact of different pretreatment methods on drying characteristics and microstructure of goji berry under electrohydrodynamic (EHD) drying process. Innovat Food Sci Emerg Technol 61:102318. https://doi.org/10.1016/j.ifset.2020.102318
Onwude Di, Iranshahi K, Rubinetti D, Martynenko A, Defraeye T (2021) Scaling-up electrohydrodynamic drying for energy-efficient food drying via physics-based simulations. J Clean Prod 329:129690. https://doi.org/10.1016/j.jclepro.2021.129690
Raghavan GSV, Rennie TJ, Sunjka PS, Orsat V, Phaphuangwittayakul W, Terdtoon P (2005) Overview of new techniques for drying biological materials with emphasis on energy aspects. Braz J Chem Eng 22:195–201. https://doi.org/10.1590/S0104-66322005000200005
Saadatmand A, Goharkhah M, Nejad AM (2022) Heat transfer enhancement in mini channel heat sinks utilizing corona wind: a numerical study. Int J Heat Mass Transfer 182:121970. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121970
Sangare D, Bostyn S, Moscosa-Santillan M, Gokalp I (2021) Hydrodynamics, heat transfer and kinetics reaction of CFD modeling of a batch stirred reactor under hydrothermal carbonization conditions. Energy 219:119635. https://doi.org/10.1016/j.energy.2020.119635
Singh A, Vanga SKK, Nair GR, Gariepy Y, Orsat V, Raghavan V (2015) Electrohydrodynamic drying (EHD) of wheat and its effect on wheat protein conformation. LWT 64:750–758. https://doi.org/10.1016/j.lwt.2015.06.051
Singh A, Vanga SKK, Nair GR, Gariepy Y, Orsat V, Raghavan V (2016) Electrohydrodynamic drying of sand. Dry Technol Int J 35:312–322. https://doi.org/10.1080/07373937.2016.1170028
Singh A, Orsat V, Raghavan V (2012) A comprehensive review on electrohydrodynamic drying and high-voltage electric field in the context of food and bioprocessing. Drying Tech An Int J 30:1812–1820. https://doi.org/10.1080/07373937.2012.708912
Zhong C, Martynenko A, Wells P, Adamiak K (2019) Numerical investigation of the multi-pin electrohydrodynamic dryer: effect of cross-flow air stream. Drying Technol 37(13):1665–1677. https://doi.org/10.1080/07373937.2018.1531291
Acknowledgements
The authors acknowledge the financial support from Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—CAPES (Finance Code 001), Conselho Nacional de Desenvolvimento Científico e Tecnológico—CNPq (grants 200394/2022-3 and 316388/2021-1), and Fundação de Amparo à Pesquisa do Estado de São Paulo – FAPESP (grant 2013/07914-8).
Funding
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior,001,Jorge Andrey Wilhelms Gut,Conselho Nacional de Desenvolvimento Científico e Tecnológico,200394/2022-3,Jorge Andrey Wilhelms Gut,316388/2021-1,Jorge Andrey Wilhelms Gut,Fundação de Amparo à Pesquisa do Estado de São Paulo,2013/07914-8,Jorge Andrey Wilhelms Gut
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Oishi, T.K., Pouzada, E.V.S., Gut, J.A.W. et al. Multiphysics modeling of wire-to-plate electrohydrodynamic drying with air crossflow. Braz. J. Chem. Eng. (2024). https://doi.org/10.1007/s43153-024-00450-2
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s43153-024-00450-2