Skip to main content
Log in

Efficiency Optimization of Variable Iron Loss Resistance Asynchronous Motor Based on Grey Wolf Optimization Algorithm

  • Original Article
  • Published:
Journal of Electrical Engineering & Technology Aims and scope Submit manuscript

Abstract

Asynchronous motor is widely used in various industrial fields. When asynchronous motor works in case close to the rated load, it will run at maximum efficiency. However, most of the load is 50–100% of rated load and it will lead to the serious waste of energy. This paper proposes an efficiency optimization control strategy based on the grey wolf optimization algorithm to improve the operating efficiency of asynchronous motors at light loads. The motor loss model considering the change of iron loss is established and it makes the asynchronous motor model more accurate. The grey wolf optimization algorithm is used to find the optimized flux value. When the asynchronous motor operates at the optimal flux, the loss power of the motor is decreased and the operation efficiency improves effectively. The proposed method reduces the flux search time and improves the stability of the system. The simulation model is established and the simulation results are provided to verify the feasibility of the proposed control strategy achieving the global efficiency optimum of asynchronous motor.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. Ferreira FJTE, Almeida ATde (2008) Novel multi-flux level three-phase squirrel-cage induction motor for efficiency and power factor maximization. IEEE Trans Energy Convers 23(1):101–109

    Article  Google Scholar 

  2. Xu W, Xiao XY, Dong DH, Tang YR, Hu D, Liu Y (2021) Overview of efficiency optimization control technology for linear induction motors. Trans China Electrotechnical Soc 36(05):902–915

    Google Scholar 

  3. Baby B, Shajilal AS (2014) An improved indirect vector controlled current source inverter fed induction motor drive with rotor resistance adaptation. 2014 Annual International Conference on Emerging Research Areas: Magnetics, Machines and Drives (AICERA/iCMMD):1–6

  4. Zhang P, Fu WX (2017) Study on efficiency optimization control and dynamic response of asynchronous motor. Large Motor Technology 250(1):40–44

    Google Scholar 

  5. Liu XF, Peng X, Li MF, Song YX (2015) Loss model method for Optimal Control of Efficiency of Asynchronous Motors. Explosion-Proof Motors 50(01):10–13

    Google Scholar 

  6. Hu FN, Lin ZH, Sun SJ (2015) An energy-saving strategy for induction motors based on vector control. Micro and Special Motors 43(10):25–29

    Google Scholar 

  7. Guo Z, Fang CQ, Zhang HX, Zhang QW (2019) Induction motor based on golden section method efficiency optimization simulation. Electr Eng 497(11):26–28

    Google Scholar 

  8. Yan WJ, Chen H, Chen L, Wang K (2018) Analysis on iron loss of switched reluctance motor under PWM mode. COMPEL-The Int J Comput Math Electr Electron Eng 37(1):448–464

    Article  Google Scholar 

  9. Roy R, Prabhakar KK, Kumar P (2017) Core-loss calculation in different parts of induction motor. IET Electr Power Appl 11(9):1664–1674

    Article  Google Scholar 

  10. Shreelakshmi MP, Agarwal V (2018) Trajectory optimization for loss minimization in induction motor Fed Elevator Systems. IEEE Trans Power Electron 33(6):5160–5170

    Article  Google Scholar 

  11. Ma XJ, Liu JF, Li HY, Zhang HQ (2013) Research on the efficiency optimization control of induction motor based on genetic algorithm. Micromotors 46(10):36–40

    Google Scholar 

  12. Cui NX, Zhang CH, SUN FT (2005) Efficiency optimization and rapid response control research of induction motor. Proc CSEE 11:118–123

    Google Scholar 

  13. Wu F, Wang PZ, Han ZZ (2014) Energy saving optimization of wind power induction motor considering iron loss resistance variation. Electr Drive 44(03):13–17

    Google Scholar 

  14. Mirjalili S, Mirjalili SM, Lewis A (2014) Grey wolf optimizer. Adv Eng Softw 69:46–61

    Article  Google Scholar 

  15. Zhang XF, Wang XY (2019) Review of Grey Wolf optimization algorithms. Comput Sci 46(03):30–38

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Di Tong.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic Supplementary Material

Below is the link to the electronic supplementary material.

Supplementary Material 1

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Guo, Z., Tong, D., Zhao, Yc. et al. Efficiency Optimization of Variable Iron Loss Resistance Asynchronous Motor Based on Grey Wolf Optimization Algorithm. J. Electr. Eng. Technol. 19, 485–493 (2024). https://doi.org/10.1007/s42835-023-01561-5

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s42835-023-01561-5

Keywords

Navigation