Abstract
Materials science has played a very crucial role in developing new technologies so far that could probably address the challenges of economic and ecological sustainability soon. In the field of advanced materials, perovskite oxides stand out to provide a clean environment, ensure enough clean energy, and sanitized water, and provide resources for industrial and growing populations. Perovskite oxides are green and eco-friendly smart materials whose properties might be significantly altered under controlled conditions. In this regard, lead-free perovskite ceramics and their composites such as BaTiO3, K0.5Na0.5NbO3, Bi0.5Na0.5TiO3, LaMnO3, BaMnO3, LaFeO3, K0.5Na0.5NbO3-BiFeO3, BaTiO3-K0.5Na0.5NbO3, BaTiO3-Bi0.5Na0.5TiO3, and many more are gaining attention due to their simple stoichiometry, cost-effectiveness, easy synthesis, eco-friendly behavior, and world-wide applications. In this review, a brief overview is given of the crystal structure and piezoelectric, ferroelectric, magnetic, and multiferroic properties of perovskite oxides. An attempt has been made to cover the progress of selective perovskite oxide and its composites. The recent advances of these perovskite oxides and applications in energy storage, energy scavenging applications via multi-layer ceramic capacitors, supercapacitors, solid-oxide fuel cells, piezoelectric actuators, transducers, sensors, and spintronics are also highlighted. Moreover, recent industrial developments based on these selective perovskite oxides are discussed as well. At the end of this review, future perspectives on current developments of perovskite oxides are also evaluated.
Similar content being viewed by others
Data availability
The data of this study will be made available from the corresponding author upon reasonable request.
References
M. Farghali, A.I. Osman, I.M. Mohamed, Z. Chen, L. Chen, I. Ihara, P.S. Yap, D.W. Rooney, Strategies to save energy in the context of the energy crisis: a review. Environ. Chem. Lett. 21, 1–37 (2023)
C. Kenny, M. Snyder, Meeting the sustainable development goal zero targets: what could we do?. Center for global development working paper (472) (2017)
P.P. Walsh, E. Murphy, D. Horan, The role of science, technology and innovation in the UN 2030 agenda. Technol. Forecast. Soc. Chang. 154, 119957 (2020)
S.H. Ali, The materials science imperative in meeting the sustainable development goals. Nat. Mater. 17(12), 1052–1053 (2018)
M.I.A. Abdel Maksoud, A.G. Bedir, M. Bekhit, M.M. Abouelela, R.A. Fahim, A.S. Awed, D.W. Rooney, MoS 2-based nanocomposites: synthesis, structure, and applications in water remediation and energy storage: a review. Environ. Chem. Lett. 19, 3645–3681 (2021)
M. Telychko, J. Lu, Recent advances in atomic imaging of organic-inorganic hybrid perovskites. Nano Mater. Sci. 1(4), 260–267 (2019)
V. Markovich, A. Wisniewski, H. Szymczak, Magnetic properties of perovskite manganites and their modifications. In Handbook of Magnetic Materials, vol 22 (Elsevier, 2014), pp. 1–201
R.M. Ormerod, Solid oxide fuel cells. Chem. Soc. Rev. 32(1), 17–28 (2003)
M.E. Arroyo-de Dompablo, A. Ponrouch, P. Johansson, M.R. Palacín, Achievements, challenges, and prospects of calcium batteries. Chem. Rev. 120(14), 6331–6357 (2019)
M. Bibes, A. Barthelemy, Oxide spintronics. IEEE Trans. Electron Devices 54(5), 1003–1023 (2007)
A. Barman, S. Kar-Narayan, D. Mukherjee, Caloric effects in perovskite oxides. Adv. Mater. Interfaces 6(15), 1900291 (2019)
E.A. Lombardo, M.A. Ulla, Perovskite oxides in catalysis: past, present and future. Res. Chem. Intermed. 24, 581–592 (1998)
T. Wolfram, S. Ellialtioglu, Electronic and optical properties of d-band perovskites (Cambridge University Press, 2006)
Y. Chen, L. Zhang, Y. Zhang, H. Gao, H. Yan, Large-area perovskite solar cells–a review of recent progress and issues. RSC Adv. 8(19), 10489–10508 (2018)
K.W. Tan, D.T. Moore, M. Saliba, H. Sai, L.A. Estroff, T. Hanrath, U. Wiesner, Thermally induced structural evolution and performance of mesoporous block copolymer-directed alumina perovskite solar cells. ACS Nano 8(5), 4730–4739 (2014)
M.A. Peña, J.L.G. Fierro, Chemical structures and performance of perovskite oxides. Chem. Rev. 101(7), 1981–2018 (2001)
N.F. Atta, A. Galal, E.H. El-Ads, Perovskite nanomaterials–synthesis, characterization, and applications. Perovskite materials–synthesis, characterisation, properties, and applications. (2016), pp. 107–151
T. Jia, Z. Zeng, X. Zhang, P. Ohodnicki, B. Chorpening, G. Hackett, Y. Duan, The influence of oxygen vacancy on the electronic and optical properties of ABO 3− δ (A= La, Sr, B= Fe, Co) perovskites. Phys. Chem. Chem. Phys. 21(36), 20454–20462 (2019)
F.S. Galasso, Structure, properties and preparation of perovskite-type compounds: international series of monographs in solid state physics, vol. 5 (Elsevier, 2013)
L.Q. Jiang, J.K. Guo, H.B. Liu, M. Zhu, X. Zhou, P. Wu, C.H. Li, Prediction of lattice constant in cubic perovskites. J. Phys. Chem. Solids 67(7), 1531–1536 (2006)
H. Huang, L. Polavarapu, J.A. Sichert, A.S. Susha, A.S. Urban, A.L. Rogach, Colloidal lead halide perovskite nanocrystals: synthesis, optical properties and applications. NPG Asia Mater. 8(11), e328–e328 (2016)
C.G. Bischak, C.L. Hetherington, H. Wu, S. Aloni, D.F. Ogletree, D.T. Limmer, N.S. Ginsberg, Origin of reversible photoinduced phase separation in hybrid perovskites. Nano Lett. 17(2), 1028–1033 (2017)
T. Kleckers, A1. 1-Electrical strain gauges, piezoelectric sensors or fiberbragg sensors for force measurement: prospects and potentials. Proc. Sens. 2013, 23–27 (2013)
V. Raghavan, Materials science and engineering: a first course. PHI Learning Pvt Ltd (2015)
https://resources.pcb.cadence.com/blog/2020-understanding-a-ferroelectric-hysteresis-loop-in-electronics (open link)
G.H. Haertling, Ferroelectric ceramics: history and technology. J. Am. Ceram. Soc. 82(4), 797–818 (1999)
Y. Xu, Ferroelectric materials and their applications (Elsevier, 2013)
O. Auciello, J.F. Scott, R. Ramesh, The physics of ferroelectric memories. Phys. Today 51(7), 22–27 (1998)
F. Jona, G. Shirane, Ferroelectric crystals. (1962)
M.D. Nguyen, C.T. Nguyen, H.N. Vu, G. Rijnders, Experimental evidence of breakdown strength and its effect on energy-storage performance in normal and relaxor ferroelectric films. Curr. Appl. Phys. 19(9), 1040–1045 (2019)
C.W. Ahn, C.H. Hong, B.Y. Choi, H.P. Kim, H.S. Han, Y. Hwang, I.W. Kim, A brief review on relaxor ferroelectrics and selected issues in lead-free relaxors. J. Korean Phys. Soc. 68, 1481–1494 (2016)
L.K. Pradhan, M. Kar Relaxor ferroelectric oxides: concept to applications. Multifunctional ferroelectric materials. (2021), pp. 49
Z. Yang, F. Gao, H. Du, L. Jin, L. Yan, Q. Hu, Y.J. Wang, Grain size engineered lead-free ceramics with both large energy storage density and ultrahigh mechanical properties. Nano Energy 58, 768–777 (2019)
F. Li, J. Zhai, B. Shen, H. Zeng, Recent progress of ecofriendly perovskite-type dielectric ceramics for energy storage applications. J. Adv. Dielectr. 8(06), 1830005 (2018)
S.F. Hoefler, G. Trimmel, T. Rath, Progress on lead-free metal halide perovskites for photovoltaic applications: a review. Monatsh. Chemie-Chem. Monthly 148, 795–826 (2017)
Y. Jia, A. Miglio, X. Gonze, M. Mikami, Ab-initio study of oxygen vacancy stability in bulk and Cerium-doped lutetium oxyorthosilicate. J. Lumin. 204, 499–505 (2018)
L. Dong, R. Jia, B. Xin, B. Peng, Y. Zhang, Effects of oxygen vacancies on the structural and optical properties of β-Ga2O3. Sci. Rep. 7(1), 40160 (2017)
N.A. Noor, Q. Mahmood, M. Rashid, B.U. Haq, A. Laref, S.A. Ahmad, Ab-initio study of thermodynamic stability, thermoelectric and optical properties of perovskites ATiO3 (A= Pb, Sn). J. Solid State Chem. 263, 115–122 (2018)
S. Dahbi, N. Tahiri, O. El Bounagui, H. Ez-Zahraouy, Electronic, optical, and thermoelectric properties of perovskite BaTiO3 compound under the effect of compressive strain. Chem. Phys. 544, 111105 (2021)
J. Park, Y.N. Wu, W.A. Saidi, B. Chorpening, Y. Duan, First-principles exploration of oxygen vacancy impact on electronic and optical properties of ABO 3− δ (A= La, Sr; B= Cr, Mn) perovskites. Phys. Chem. Chem. Phys. 22(46), 27163–27172 (2020)
Y. Jee, J.K. Wuenschell, H.W. Abernathy, S. Lee, T.L. Kalapos, G.A. Hackett, P.R. Ohodnicki, High-temperature oxygen sensing behavior of perovskite films on the optical fiber platform. In Oxide-based Materials and Devices X, vol 10919 (SPIE, 2019), pp. 233–241
J.B. Goodenough, Metallic oxides. Prog. Solid State Chem. 5, 145–399 (1971)
L.K. Aminov, B.Z. Malkin, M.A. Teplov, Handbook of the Physics and Chemistry of Rare Earths, vol. 22, ed. by K.A. Gschneider Jr., L. Eyring (2002)
A.K. Kundu, Magnetic perovskites. Eng. Mater. (2016)
C.L. Prajapat, S. Singh, D. Bhattacharya, G. Ravikumar, S. Basu, S. Mattauch, A. Paul, Proximity effects across oxide-interfaces of superconductor-insulator-ferromagnet hybrid heterostructure. Sci. Rep. 8(1), 3732 (2018)
H.U. Habermeier, G. Cristiani, R.K. Kremer, O. Lebedev, G. Van Tendeloo, Cuprate/manganite superlattices: A model system for a bulk ferromagnetic superconductor. Phys. C: Supercond. Appl. 364, 298–304 (2001)
C. Zener, Interaction between the d shells in the transition metals. Phys. Rev. 81(3), 440 (1951)
A.J. Millis, Electron-lattice coupling in “colossal” magnetoresistance rare earth manganites. J. Appl. Phys. 81(8), 5502–5503 (1997)
J.B. Goodenough, Theory of the role of covalence in the perovskite-type manganites [La, M (II)] Mn O 3. Phys. Rev. 100(2), 564 (1955)
W. Chen, Z. Sun, Z. Wang, L. Gu, X. Xu, S. Wu, C. Gao, Direct observation of van der Waals stacking–dependent interlayer magnetism. Science 366(6468), 983–987 (2019)
P. Němec, M. Fiebig, T. Kampfrath, A.V. Kimel, Antiferromagnetic opto-spintronics. Nat. Phys. 14(3), 229–241 (2018)
T. Jungwirth, X. Marti, P. Wadley, J. Wunderlich, Antiferromagnetic spintronics. Nat. Nanotechnol. 11(3), 231–241 (2016)
H. Schmid, Multi-ferroic magnetoelectrics. Ferroelectrics 162(1), 317–338 (1994)
M. Fiebig, Revival of the magnetoelectric effect. J. Phys. D Appl. Phys. 38(8), R123 (2005)
W. Prellier, M.P. Singh, P. Murugavel, The single-phase multiferroic oxides: from bulk to thin film. J. Phys. Condens. Matter 17(30), R803 (2005)
D. Khomskii, Classifying multiferroics: mechanisms and effects. Physics 2, 20 (2009)
M.M. Vopson, Fundamentals of multiferroic materials and their possible applications. Crit. Rev. Solid State Mater. Sci. 40(4), 223–250 (2015)
N.A. Hill, Why are there so few magnetic ferroelectrics? J. Phys. Chem. B 104(29), 6694–6709 (2000)
L.A. Shuvalov, N.V. Belov, The symmetry of crystals in which ferromagnetic and ferroelectric properties appear simultaneously. Kristallografiya 7(192), 150–151 (1962)
N.A. Hill, Density functional studies of multiferroic magnetoelectrics. Annu. Rev. Mater. Res. 32(1), 1–37 (2002)
H. Liu, X. Yang, A brief review on perovskite multiferroics. Ferroelectrics 507(1), 69–85 (2017)
M. Acosta, N. Novak, V. Rojas, S. Patel, R. Vaish, J. Koruza, G.A. Rossetti, J.J. Rödel, BaTiO3-based piezoelectrics: fundamentals, current status, and perspectives. Appl. Phys. Rev. 4(4) (2017)
J. Gao, X. Ke, M. Acosta, J. Glaum, X. Ren, High piezoelectricity by multiphase coexisting point: barium titanate derivatives. MRS Bull. 43(8), 595–599 (2018)
S.I. Shkuratov, C.S. Lynch, A review of ferroelectric materials for high power devices. J. Materiomics 8(4), 739–752 (2022)
Z. Yao, H. Liu, Y. Liu, Z. Wu, Z. Shen, Y. Liu, M. Cao, Structure and dielectric behavior of Nd-doped BaTiO3 perovskites. Mater. Chem. Phys. 109(2–3), 475–481 (2008)
L. Zhao, B.P. Zhang, P.F. Zhou, L.F. Zhu, J.F. Li, Effect of Li2O addition on sintering and piezoelectric properties of (Ba, Ca)(Ti, Sn) O3 lead-free piezoceramics. J. Eur. Ceram. Soc. 35(2), 533–540 (2015)
L.F. Zhu, B.P. Zhang, X.K. Zhao, L. Zhao, F.Z. Yao, X. Han, P.F. Zhou, J.F. Li, Phase transition and high piezoelectricity in (Ba, Ca)(Ti1− xSnx) O3 lead-free ceramics. Appl. Phys. Lett. 103(7) (2013)
C. Zhou, W. Liu, D. Xue, X. Ren, H. Bao, J. Gao, L. Zhang, Triple-point-type morphotropic phase boundary based large piezoelectric Pb-free material—Ba (Ti0. 8Hf0. 2) O3-(Ba0. 7Ca0. 3) TiO3. Appl. Phys. Lett. 100(22) (2012)
D. Xue, Y. Zhou, H. Bao, J. Gao, C. Zhou, X. Ren, Large piezoelectric effect in Pb-free Ba (Ti, Sn) O3-x (Ba, ca) TiO3 ceramics. Appl. Phys. Lett. 99(12) (2011)
W. Wang, L.D. Wang, W.L. Li, D. Xu, Y.F. Hou, W.P. Cao, W.D. Fei, Piezoelectric properties of BaTiO3–CaTiO3–BaZrO3 ceramics with compositions near the morphotropic phase boundary. Ceram. Int. 40(9), 14907–14912 (2014)
M. Acosta, N. Novak, G.A. Rossetti, J. Rödel, Mechanisms of electromechanical response in (1− x) Ba (Zr0. 2Ti0. 8) O3-x (Ba0. 7Ca0. 3) TiO3 ceramics. Appl. Phys. Lett. 107(14) (2015)
G.A. Smolenskii, A.I. Agranovskaya, S.N. Popov, V.A. Isupov, New ferroelectrics of complex composition. Sov. Phys. Tech. Phys. 28, 2152 (1958)
T. Zheng, J. Wu, D. Xiao, J. Zhu, Recent development in lead-free perovskite piezoelectric bulk materials. Prog. Mater. Sci. 98, 552–624 (2018)
M. Naderer, T. Kainz, D. Schütz, K. Reichmann, The influence of Ti-nonstoichiometry in Bi0. 5Na0. 5TiO3. J. Eur. Ceram. Soc. Soc. 34(3), 663–667 (2014)
Y.S. Sung, J.M. Kim, J.H. Cho, T.K. Song, M.H. Kim, T.G. Park, Effects of Bi nonstoichiometry in (Bi0. 5+ xNa) TiO3 ceramics. Appl. Phys. Lett. 98(1) (2011)
S.T. Zhang, A.B. Kounga, E. Aulbach, H. Ehrenberg, J. Rödel, Giant strain in lead-free piezoceramics Bi0. 5Na0. 5TiO3–BaTiO3–K0. 5Na0. 5NbO3 system. Appl. Phys. Lett. 91(11) (2007)
S. Ullah Jan, A. Zeb, S.J. Milne, Electrical properties of Ca-modified Na0. 5Bi0. 5TiO3–BaTiO3 ceramics. Ceram. Int. Int. 40(10), 15439–15445 (2014)
B. Parija, Morphotropic Phase boundary in BNT-BZT solid solution: a study by Raman spectroscopy and electromechanical parameters. J. Ceram. Process. Res. 16(5), 565–571 (2015)
A. Moosavi, M.A. Bahrevar, A.R. Aghaei, P. Ramos, M. Algueró, H. Amorín, High-field electromechanical response of Bi0. 5Na0. 5TiO3–Bi0. 5K0. 5TiO3 across its morphotropic phase boundary. J. Phys. D Appl. Phys. 47(5), 055304 (2014)
Y.R. Zhang, J.F. Li, B.P. Zhang, C.E. Peng, Piezoelectric and ferroelectric properties of Bi-compensated (Bi1/2Na1/2) TiO3–(Bi1/2K1/2) TiO3 lead-free piezoelectric ceramics. J. Appl. Phys. 103(7) (2008)
H.L. Li, Q. Liu, J.J. Zhou, K. Wang, J.F. Li, H. Liu, J.Z. Fang, Grain size dependent electrostrain in Bi1/2Na1/2TiO3-SrTiO3 incipient piezoceramics. J. Eur. Ceram. Soc. 36(11), 2849–2853 (2016)
F. Weyland, M. Acosta, J. Koruza, P. Breckner, J. Rödel, N. Novak, Criticality: concept to enhance the piezoelectric and electrocaloric properties of ferroelectrics. Adv. Func. Mater. 26(40), 7326–7333 (2016)
T. Chen, T. Zhang, G. Wang, J. Zhou, J. Zhang, Y. Liu, Effect of Li0. 12Na0. 88NbO3 content on the electrical properties of Bi0. 50Na0. 50TiO3 lead-free piezoelectric ceramics. J. Alloy. Compd. 520, 7–10 (2012)
A.B. Kounga, S.T. Zhang, W. Jo, T. Granzow, J. Rödel, Morphotropic phase boundary in (1− x) Bi0. 5Na0. 5TiO3–xK0. 5Na0. 5NbO3 lead-free piezoceramics. Appl. Phys. Lett. 92(22) (2008)
D. Lin, K.W. Kwok, H.L.W. Chan, Structure and electrical properties of Bi0. 5Na0. 5TiO3–BaTiO3–Bi0. 5Li0. 5TiO3 lead-free piezoelectric ceramics. Solid State Ionics 178(37–38), 1930–1937 (2008)
L. Wu, D. Xiao, F. Zhou, Y. Teng, Y. Li, Microstructure, ferroelectric, and piezoelectric properties of (1− x− y) Bi0. 5Na0. 5TiO3–xBaTiO3–yBi0. 5Ag0. 5TiO3 lead-free ceramics. J. Alloys Compd. 509(2), 466–470 (2011)
J. Chen, Y. Wang, Y. Zhang, Y. Yang, R. Jin, Giant electric field-induced strain at room temperature in LiNbO3-doped 0.94 (Bi0. 5Na0. 5) TiO3-0.06 BaTiO3. J. Eur. Ceram. Soc. 37(6), 2365–2371 (2017)
A. Maqbool, A. Hussain, J.U. Rahman, T.K. Song, W.J. Kim, J. Lee, M.H. Kim, Enhanced electric field-induced strain and ferroelectric behavior of (Bi0. 5Na0. 5) TiO3–BaTiO3–SrZrO3 lead-free ceramics. Ceram. Int. 40(8), 11905–11914 (2014)
Y.J. Dai, S. Zhang, T.R. Shrout, X.W. Zhang, Piezoelectric and ferroelectric properties of Li‐doped (Bi0. 5Na0. 5) TiO3–(Bi0. 5K0. 5) TiO3–BaTiO3 lead‐free piezoelectric ceramics. J. Am. Ceram. Soc. 93(4), 1108–1113 (2010)
W. Jo, T. Granzow, E. Aulbach, J. Rödel, D. Damjanovic, Origin of the large strain response in (K0. 5Na0. 5) NbO3-modified (Bi0. 5Na0. 5) TiO3–BaTiO3 lead-free piezoceramics. J. Appl. Phys. 105(9) (2009)
J. Wu, D. Xiao, J. Zhu, Potassium–sodium niobate lead-free piezoelectric materials: past, present, and future of phase boundaries. Chem. Rev. 115(7), 2559–2595 (2015)
J. Wu, Advances in lead-free piezoelectric materials (Springer, Singapore, 2018), pp.379–396
X. Lv, J. Zhu, D. Xiao, X.X. Zhang, J. Wu, Emerging new phase boundary in potassium sodium-niobate based ceramics. Chem. Soc. Rev. 49(3), 671–707 (2020)
K. Nakamura, Y. Kawamura, Orientation dependence of electromechanical coupling factors in KNbO/sub 3. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 47(3), 750–755 (2000)
F. Rubio-Marcos, J.F. Fernandez, D.A. Ochoa, J.E. García, R.E. Rojas-Hernandez, M. Castro, L. Ramajo, Understanding the piezoelectric properties in potassium-sodium niobate-based lead-free piezoceramics: Interrelationship between intrinsic and extrinsic factors. J. Eur. Ceram. Soc. 37(11), 3501–3509 (2017)
F. Rubio-Marcos, R. Lopez-Juarez, R.E. Rojas-Hernandez, A. del Campo, N. Razo-Perez, J.F. Fernandez, Lead-free piezoceramics: revealing the role of the rhombohedral–tetragonal phase coexistence in enhancement of the piezoelectric properties. ACS Appl. Mater. Interfaces 7(41), 23080–23088 (2015)
B. Wu, H. Wu, J. Wu, D. Xiao, J. Zhu, S.J. Pennycook, Giant piezoelectricity and high Curie temperature in nanostructured alkali niobate lead-free piezoceramics through phase coexistence. J. Am. Chem. Soc. 138(47), 15459–15464 (2016)
H. Tao, H. Wu, Y. Liu, Y. Zhang, J. Wu, F. Li, S.J. Pennycook, Ultrahigh performance in lead-free piezoceramics utilizing a relaxor slush polar state with multiphase coexistence. J. Am. Chem. Soc. 141(35), 13987–13994 (2019)
J. Wu, D. Xiao, Y. Wang, W. Wu, B. Zhang, J. Zhu, Q. Li, Microstructure and electrical properties of (Li, Ag, Ta, Sb)-modified (K0. 50Na0. 50) NbO3 lead-free ceramics with good temperature stability. J. Phys. D Appl. Phys. 41(12), 125405 (2008)
J. Hao, W. Bai, B. Shen, J. Zhai, Improved piezoelectric properties of (KxNa1− x) 0.94 Li0. 06NbO3 lead-free ceramics fabricated by combining two-step sintering. J. Alloy. Compd. 534, 13–19 (2012)
P. Palei, P. Kumar, Dielectric, ferroelectric and piezoelectric properties of (1− x)[K0. 5Na0. 5NbO3]− x [LiSbO3] ceramics. J. Phys. Chem. Solids 73(7), 827–833 (2012)
T. Shao, H. Du, H. Ma, S. Qu, J. Wang, J. Wang, Z. Xu, Potassium–sodium niobate based lead-free ceramics: novel electrical energy storage materials. J. Mater. Chem. A 5(2), 554–563 (2017)
S.L. Yang, C.C. Tsai, Y.C. Liou, C.S. Hong, B.J. Li, S.Y. Chu, Investigation of CuO-doped NKN ceramics with high mechanical quality factor synthesized by a B-site oxide precursor method. J. Am. Ceram. Soc. 95(3), 1011–1017 (2012)
J. Wu, Perovskite lead-free piezoelectric ceramics. J. Appl. Phys. 127(19) (2020)
A.J.C. Buurma, G.R. Blake, T.T.M. Palstra, U. Adem, Multiferroic materials: physics and properties. Reference Module in materials science and materials engineering, (2016)
S. Dong, J.M. Liu, S.W. Cheong, Z. Ren, Multiferroic materials and magnetoelectric physics: symmetry, entanglement, excitation, and topology. Adv. Phys. 64(5–6), 519–626 (2015)
V.V. Shvartsman, W. Kleemann, R. Haumont, J. Kreisel, Large bulk polarization and regular domain structure in ceramic BiFeO3. Appl. Phys. Lett. 90(17) (2007)
S.W. Cheong, M. Mostovoy, Multiferroics: a magnetic twist for ferroelectricity. Nat. Mater. 6(1), 13–20 (2007)
S. Bhuktare, A. Bose, H. Singh, A.A. Tulapurkar, Gyrator based on magneto-elastic coupling at a ferromagnetic/piezoelectric interface. Sci. Rep. 7(1), 840 (2017)
S. Kumar, P. Kumar, R. Walia, V. Verma, Improved ferroelectric, magnetic and photovoltaic properties of Pr doped multiferroic bismuth ferrites for photovoltaic application. Results Phys. 14, 102403 (2019)
W. Kleemann, Magnetoelectric spintronics. J. Appl. Phys. 114(2) (2013)
A. Moser, K. Takano, D.T. Margulies, M. Albrecht, Y. Sonobe, Y. Ikeda, E.E. Fullerton, Magnetic recording: advancing into the future. J. Phys. D Appl. Phys. 35(19), R157 (2002)
M. Balinskiy, A.C. Chavez, A. Barra, H. Chiang, G.P. Carman, A. Khitun, Magnetoelectric spin wave modulator based on synthetic multiferroic structure. Sci. Rep. 8(1), 10867 (2018)
M.J. Bauer, X. Wen, P. Tiwari, D.P. Arnold, J.S. Andrew, Magnetic field sensors using arrays of electrospun magnetoelectric Janus nanowires. Microsyst. Nanoeng. 4(1), 37 (2018)
G.R. Love, Energy storage in ceramic dielectrics. J. Am. Ceram. Soc. 73(2), 323–328 (1990)
L. Fulanović, M.H. Zhang, Y. Fu, J. Koruza, J. Rödel, NaNbO3-based antiferroelectric multilayer ceramic capacitors for energy storage applications. J. Eur. Ceram. Soc. 41(11), 5519–5525 (2021)
G.F. Engel, Design and materials of antiferroelectric capacitors for high density power electronic applications. In CIPS 2016; 9th International conference on integrated power electronics systems, (VDE, 2016), pp. 1–7
J. Gao, L. Zhao, Q. Liu, X. Wang, S. Zhang, J.F. Li, Antiferroelectric-ferroelectric phase transition in lead-free AgNbO3 ceramics for energy storage applications. J. Am. Ceram. Soc. 101(12), 5443–5450 (2018)
S. Chu, Y. Cui, N. Liu, The path towards sustainable energy. Nat. Mater. 16(1), 16–22 (2017)
S. Singh, S. Jain, P.S. Venkateswaran, A.K. Tiwari, M.R. Nouni, J.K. Pandey, S. Goel, Hydrogen: a sustainable fuel for future of the transport sector. Renew. Sustain. Energy Rev. 51, 623–633 (2015)
A.K. Tomar, A. Joshi, G. Singh, R.K. Sharma, Perovskite oxides as supercapacitive electrode: properties, design and recent advances. Coord. Chem. Rev. 431, 213680 (2021)
J. Yan, S. Li, B. Lan, Y. Wu, P.S. Lee, Rational design of nanostructured electrode materials toward multifunctional supercapacitors. Adv. Func. Mater. 30(2), 1902564 (2020)
Y. Liu, Z. Wang, Y. Zhong, X. Xu, J.P.M. Veder, M.R. Rowles, Z. Shao, Activation-free supercapacitor electrode based on surface-modified Sr2CoMo1-xNixO6-δ perovskite. Chem. Eng. J. 390, 124645 (2020)
Y. Cao, J. Liang, X. Li, L. Yue, Q. Liu, S. Lu, X. Sun, Recent advances in perovskite oxides as electrode materials for supercapacitors. Chem. Commun. 57(19), 2343–2355 (2021)
J.T. Mefford, W.G. Hardin, S. Dai, K.P. Johnston, K.J. Stevenson, Anion charge storage through oxygen intercalation in LaMnO3 perovskite pseudocapacitor electrodes. Nat. Mater. 13(7), 726–732 (2014)
P.M. Shafi, N. Joseph, A. Thirumurugan, A.C. Bose, Enhanced electrochemical performances of agglomeration-free LaMnO3 perovskite nanoparticles and achieving high energy and power densities with symmetric supercapacitor design. Chem. Eng. J. 338, 147–156 (2018)
Z.A. Elsiddig, H. Xu, D. Wang, W. Zhang, X. Guo, Y. Zhang, J. Chen, Modulating Mn4+ ions and oxygen vacancies in nonstoichiometric LaMnO3 perovskite by a facile sol-gel method as high-performance supercapacitor electrodes. Electrochim. Acta 253, 422–429 (2017)
Y.L. Song, Z.C. Wang, Y.D. Yan, M.L. Zhang, G.L. Wang, T.Q. Yin, ... M. Qiu, Molten salt synthesis and supercapacitor properties of oxygen-vacancy LaMnO3− δ. J. Energy Chem. 43, 173–181 (2020)
V.S. Devi, K. Kannadasan, P.C. Sharafudeen, P. Elumalai, Performance of sodium-ion supercapattery using LaMnO 3 and rGO in non-aqueous electrolyte. New J. Chem. 46(31), 15130–15144 (2022)
Z. Li, W. Zhang, H. Wang, B. Yang, Two-dimensional perovskite LaNiO3 nanosheets with hierarchical porous structure for high-rate capacitive energy storage. Electrochim. Acta 258, 561–570 (2017)
W. Che, M. Wei, Z. Sang, Y. Ou, Y. Liu, J. Liu, Perovskite LaNiO3-δ oxide as an anion-intercalated pseudocapacitor electrode. J. Alloy. Compd. 731, 381–388 (2018)
N. Arjun, G.T. Pan, T.C. Yang, The exploration of Lanthanum based perovskites and their complementary electrolytes for the supercapacitor applications. Results Phys. 7, 920–926 (2017)
K.H. Ho, J. Wang, Hydrazine reduction of LaNiO3 for active materials in supercapacitors. J. Am. Ceram. Soc. 100(10), 4629–4637 (2017)
Z. Li, W. Zhang, C. Yuan, Y. Su, Controlled synthesis of perovskite lanthanum ferrite nanotubes with excellent electrochemical properties. RSC Adv. 7(21), 12931–12937 (2017)
G. Guo, K. Ouyang, J. Yu, Y. Liu, S. Feng, M. Wei, Facile synthesis of LaCoO3 with a high oxygen vacancy concentration by the plasma etching technique for high-performance oxygen ion intercalation pseudocapacitors. ACS Appl. Energy Mater. 3(1), 300–308 (2019)
Y. Zhang, J. Ding, W. Xu, M. Wang, R. Shao, Y. Sun, B. Lin, Mesoporous LaFeO3 perovskite derived from MOF gel for all-solid-state symmetric supercapacitors. Chem. Eng. J. 386, 124030 (2020)
A. Qayyum, M.O. urRehman, F. Ahmad, M.A. Khan, S.M. Ramay, S. Atiq, Performance optimization of Nd-doped LaNiO3 as an electrode material in supercapacitors. Solid State Ionics 395, 116227 (2023)
Y. Cao, B. Lin, Y. Sun, H. Yang, X. Zhang, Sr-doped lanthanum nickelate nanofibers for high energy density supercapacitors. Electrochim. Acta 174, 41–50 (2015)
Y. Cao, B. Lin, Y. Sun, H. Yang, X. Zhang, Symmetric/asymmetric supercapacitor based on the perovskite-type lanthanum cobaltate nanofibers with Sr-SUBSTITUTION. Electrochim. Acta 178, 398–406 (2015)
W. Wang, B. Lin, H. Zhang, Y. Sun, X. Zhang, H. Yang, Synthesis, morphology and electrochemical performances of perovskite-type oxide LaxSr1-xFeO3 nanofibers prepared by electrospinning. J. Phys. Chem. Solids 124, 144–150 (2019)
C.T. Alexander, J.T. Mefford, J. Saunders, R.P. Forslund, K.P. Johnston, K.J. Stevenson, Anion-based pseudocapacitance of the perovskite library La1–x Sr x BO3− δ (B= Fe, Mn, Co). ACS Appl. Mater. Interfaces 11(5), 5084–5094 (2019)
W. Wang, W. Liu, M. Kamiko, S. Yagi, Enhanced catalytic activity of perovskite La 1–x Sr x MnO 3+ δ for the oxygen reduction reaction. New J. Chem. 46(27), 13082–13088 (2022)
X.W. Wang, Q.Q. Zhu, X.E. Wang, H.C. Zhang, J.J. Zhang, L.F. Wang, Structural and electrochemical properties of La0. 85Sr0. 15MnO3 powder as an electrode material for supercapacitor. J. Alloy. Compd. 675, 195–200 (2016)
C.T. Alexander, R.P. Forslund, K.P. Johnston, K.J. Stevenson, Tuning redox transitions via the inductive effect in LaNi1–x Fe x O3− δ perovskites for high-power asymmetric and symmetric pseudocapacitors. ACS Appl. Energy Mater. 2(9), 6558–6568 (2019)
A. Rezanezhad, E. Rezaie, L.S. Ghadimi, A. Hajalilou, E. Abouzari-Lotf, N. Arsalani, Outstanding supercapacitor performance of Nd–Mn co-doped perovskite LaFeO3@ nitrogen-doped graphene oxide nanocomposites. Electrochim. Acta 335, 135699 (2020)
P.P. Ma, B. Zhu, N. Lei, Y.K. Liu, B. Yu, Q.L. Lu, G.H. Jiang, Effect of Sr substitution on structure and electrochemical properties of perovskite-type LaMn0. 9Ni0. 1O3 nanofibers. Mater. Lett. 252, 23–26 (2019)
Y. Cao, B. Lin, Y. Sun, H. Yang, X. Zhang, Synthesis, structure and electrochemical properties of lanthanum manganese nanofibers doped with Sr and Cu. J. Alloy. Compd. 638, 204–213 (2015)
Z.U. Rehman, M.A. Raza, A. Tariq, U.N. Chishti, M.F. Maqsood, N. Lee, A. Inam, La0. 75Sr0. 25Cr0. 5Mn0. 5O3 perovskite developed for supercapacitor applications. J. Energy Storage 32, 101951 (2020)
A. Galal, H.K. Hassan, T. Jacob, N.F. Atta, Enhancing the specific capacitance of SrRuO3 and reduced graphene oxide in NaNO3, H3PO4 and KOH electrolytes. Electrochim. Acta 260, 738–747 (2018)
A.K. Tomar, G. Singh, R.K. Sharma, Charge storage characteristics of mesoporous strontium titanate perovskite aqueous as well as flexible solid-state supercapacitor cell. J. Power. Sources 426, 223–232 (2019)
Y. Liu, J. Dinh, M.O. Tade, Z. Shao, Design of perovskite oxides as anion-intercalation-type electrodes for supercapacitors: cation leaching effect. ACS Appl. Mater. Interfaces 8(36), 23774–23783 (2016)
G. George, S.L. Jackson, C.Q. Luo, D. Fang, D. Luo, D. Hu, Z. Luo, Effect of doping on the performance of high-crystalline SrMnO3 perovskite nanofibers as a supercapacitor electrode. Ceram. Int. 44(17), 21982–21992 (2018)
N. Lei, P. Ma, B. Yu, S. Li, J. Dai, G. Jiang, Anion-intercalated supercapacitor electrode based on perovskite-type SrB0. 875Nb0. 125O3 (B= Mn, Co). Chem. Eng. J. 421, 127790 (2021)
J.T.S. Irvine, Perovskite oxide anodes for SOFCs. Perovskite oxide for solid oxide fuel cells, (2009), pp. 167–182
J.M. Tarascon, M. Armand, Materials for sustainable energy: a collection of peer-reviewed research and review articles from Nature Publishing Group. World Scientific 414, 171–179 (2011)
K.W. Song, K.T. Lee, Characterization of Ba0. 5Sr0. 5M1− xFexO3− δ (M= Co and Cu) perovskite oxide cathode materials for intermediate temperature solid oxide fuel cells. Ceram. Int. 38(6), 5123–5131 (2012)
C.H.E.N. Tongyun, S.H.E.N. Liming, L.I.U. Feng, Z.H.U. Weichang, Q. Zhang, C.H.U. Xiangfeng, NdFeO3 as anode material for S/O2 solid oxide fuel cells. J. Rare Earths 30(11), 1138–1141 (2012)
F. Wang, D. Chen, Z. Shao, Sm0. 5Sr0. 5CoO3− δ-infiltrated cathodes for solid oxide fuel cells with improved oxygen reduction activity and stability. J. Power. Sources 216, 208–215 (2012)
R. Dittmer, E. Aulbach, W. Jo, K.G. Webber, J. Rödel, Large blocking force in Bi1/2Na1/2TiO3-based lead-free piezoceramics. Scripta Mater. 67(1), 100–103 (2012)
X.X. Wang, S.W. Or, K.H. Lam, H.L.W. Chan, P.K. Choy, P.C.K. Liu, Cymbal actuator fabricated using (Na 0.46 K 0.46 Li 0.08) NbO 3 lead-free piezoceramic. J. Electroceram. 16, 385–388 (2006)
S.K. Abbas, M.A. Aslam, M. Amir, S. Atiq, Z. Ahmed, S.A. Siddiqi, S. Naseem, Electrical impedance functionality and spin orientation transformation of nanostructured Sr-substituted BaMnO3 hexagonal perovskites. J. Alloy. Compd. 712, 720–731 (2017)
L.X. Zhang, W. Chen, X. Ren, Large recoverable electrostrain in Mn-doped (Ba, Sr) TiO3 ceramics. Appl. Phys. Lett. 85(23), 5658–5660 (2004)
S. Wada, K. Yako, H. Kakemoto, T. Tsurumi, T. Kiguchi, Enhanced piezoelectric properties of barium titanate single crystals with different engineered-domain sizes. J. Appl. Phys. 98(1) (2005)
Z.Y. Shen, J.F. Li, Enhancement of piezoelectric constant d33 in BaTiO3 ceramics due to nano-domain structure. J. Ceram. Soc. Jpn. 118(1382), 940–943 (2010)
D. Hu, K. Mori, X. Kong, K. Shinagawa, S. Wada, Q. Feng, Fabrication of [1 0 0]-oriented bismuth sodium titanate ceramics with small grain size and high density for piezoelectric materials. J. Eur. Ceram. Soc. 34(5), 1169–1180 (2014)
T. Karaki, K. Yan, T. Miyamoto, M. Adachi, Lead-free piezoelectric ceramics with large dielectric and piezoelectric constants manufactured from BaTiO3 nano-powder. Jpn. J. Appl. Phys. 46(2L), L97 (2007)
M. Budimir, D. Damjanovic, N. Setter, Enhancement of the piezoelectric response of tetragonal perovskite single crystals by uniaxial stress applied along the polar axis: a free-energy approach. Phys. Rev. B 72(6), 064107 (2005)
A. Kumar, A. Sharma, R. Kumar, R. Vaish, Finite element study on acoustic energy harvesting using lead-free piezoelectric ceramics. J. Electron. Mater. 47, 1447–1458 (2018)
N.V. Volkov, Spintronics: manganite-based magnetic tunnel structures. Phys. Usp. 55(3), 250 (2012)
X. Li, J. Yang, First-principles design of spintronics materials. Natl. Sci. Rev. 3(3), 365–381 (2016)
H. Zabel, S.D. Bader, (eds.), Magnetic heterostructures: advances and perspectives in spinstructures and spintransport. (2007)
J.Z. Sun, L. Krusin-Elbaum, P.R. Duncombe, A. Gupta, R.B. Laibowitz, Temperature dependent, non-ohmic magnetoresistance in doped perovskite manganate trilayer junctions. Appl. Phys. Lett. 70(13), 1769–1771 (1997)
M. Viret, M. Drouet, J. Nassar, J.P. Contour, C. Fermon, A. Fert, Low-field colossal magnetoresistance in manganite tunnel spin valves. Europhys. Lett. 39(5), 545 (1997)
M. Bowen, M. Bibes, A. Barthélémy, J.P. Contour, A. Anane, Y. Lemaıtre, A. Fert, Nearly total spin polarization in La 2/3 Sr 1/3 MnO 3 from tunneling experiments. Appl. Phys. Lett. 82(2), 233–235 (2003)
U. Lüders, M. Bibes, K. Bouzehouane, E. Jacquet, J.P. Contour, S. Fusil, J.-f. bobo, j. fontcuberta, a. barthélémy and a. fert. Appl. Phys. Lett 88, 082505 (2006)
P. Fischer, M. Polomska, I. Sosnowska, M. Szymanski, Temperature dependence of the crystal and magnetic structures of BiFeO3. J. Phys. C Solid State Phys. 13(10), 1931 (1980)
I. Fina, X. Marti, D. Yi, J. Liu, J.H. Chu, C. Rayan-Serrao, R. Ramesh, Anisotropic magnetoresistance in an antiferromagnetic semiconductor. Nat. Commun. 5(1), 4671 (2014)
V. Baltz, A. Manchon, M. Tsoi, T. Moriyama, T. Ono, Y. Tserkovnyak, Antiferromagnetic spintronics. Rev. Mod. Phys. 90(1), 015005 (2018)
J. Ryu, S. Lee, K.J. Lee, B.G. Park, Current-induced spin–orbit torques for spintronic applications. Adv. Mater. 32(35), 1907148 (2020)
S. Ning, H. Liu, J. Wu, F. Luo, Challenges and opportunities for spintronics based on spin orbit torque. Fundamental Res. 2(4), 535–538 (2022)
N.O. Urs, B. Mozooni, P. Mazalski, M. Kustov, P. Hayes, S. Deldar, J. McCord, Advanced magneto-optical microscopy: imaging from picoseconds to centimeters-imaging spin waves and temperature distributions. AIP Adv. 6(5) (2016)
D. Xiong, Y. Jiang, K. Shi, A. Du, Y. Yao, Z. Guo, W. Zhao, Antiferromagnetic spintronics: an overview and outlook. Fundamental Res. 2(4), 522–534 (2022)
N. Marati, R.G. Gupta, B. Vaithilingam, Multilayer ceramic capacitors crisis management in automotive industry. In 2020 IEEE International Conference on Power Electronics, Smart Grid and Renewable Energy (PESGRE2020), (IEEE, 2020) pp. 1–6
J. Zhang, Z. Pan, F.F. Guo, W.C. Liu, H. Ning, Y.B. Chen, Y.F. Chen, Semiconductor/relaxor 0–3 type composites without thermal depolarization in Bi0. 5Na0. 5TiO3-based lead-free piezoceramics. Nat. Commun. 6(1), 6615 (2015)
J. Zhang, Z. Pan, P.X. Nie, Y.S. Cui, B. Yang, J. Chen, S.T. Zhang, Bi0. 5Na0. 5TiO3: ZnO lead-free piezoelectric composites with deferred thermal depolarization. Appl. Phys. Lett. 106(23) (2015)
P. Peng, H. Nie, Z. Liu, W. Ren, F. Cao, G. Wang, X. Dong, Enhanced ferroelectric properties and thermal stability of Mn‐doped 0.96 (Bi0. 5 Na0. 5) TiO3‐0.04 BiAlO3 ceramics. J. Am. Ceram. Soc. 100(3), 1030–1036 (2017)
X. Liu, X. Tan, Giant strains in non-textured (Bi1/2Na1/2) TiO3-based lead-free ceramics. Adv. Mater. 28(3), 574–578 (2016)
Author information
Authors and Affiliations
Contributions
Priyanka Thakur: Software, Visualization, Writing-original draft. Navdeep Sharma: Software, Resources, Writing-review & editing. Dinesh Pathak: Writing-review & editing. Pankaj Sharma: Writing-review & editing. Kamal Kishore: Writing-review & editing. Shashi Dhar: Writing-original draft. Madan Lal: Writing-original draft, Conceptualization, data curation, supervision, Writing-review & editing.
Corresponding author
Ethics declarations
Ethical approval
Not applicable.
Conflict of interest
The authors declare no competing interests.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Thakur, P., Sharma, N., Pathak, D. et al. State-of-art review on smart perovskites materials: properties and applications. emergent mater. (2024). https://doi.org/10.1007/s42247-024-00645-w
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s42247-024-00645-w