Abstract
Al-5Ti-B and Al-5Ti-B-Gd master alloy refiners were fabricated by fluorine salt casting method. The microstructure and phase constitution of the master alloys were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The results show that Al-Ti-B alloy refiner consists of Al3Ti phase and TiB2 phase. After Gd is introduced into the intermediate alloy, Ti2Al20Gd phase appears in the alloy, the size of Al3Ti is significantly reduced, and Ti-Al-Gd phase is found in the edge of Al3Ti phase. At the same time, some independent Ti-Al-Gd phases appear in local areas, which are Ti2Al20Gd phase determined by micro-area electron diffraction analysis. Analysis and calculation results of the high-resolution images of the Ti2Al20Gd/Al structure show that there is no other compound at the junction between the Ti2Al20Gd phase and Al, and Ti2Al20Gd phase has a great difference in atomic space with the α-Al, which cannot be directly used as heterogeneous nucleus. But, after being decomposed in the aluminum melt, the Ti2Al20Gd phase can promote the refinement effect of the refiner. In the Al-Ti-B-Gd master alloy, there are many dispersed Al3Ti particles with a size of less than 1 µm, which can promote the Al-5Ti-B refining effect.
Article PDF
Similar content being viewed by others
References
Xu X X, Feng Y T, Fan H, et al. The grain refinement of 1070 alloy by different Al-Ti-B mater alloys and its influence on the electrical conductivity. Results in Physics, 2019, 14(9): 1024–1030.
Matveev A, Zhukov I, Ziatdinov M, et al. Planetary milling and self-propagating high-temperature synthesis of Al-TiB2 composites. Materials, 2020, 13(5): 1050–1058.
Jia Y W, Huang H J, Fu Y N, et al. An in-situ investigation of the solute suppressed nucleation zone in an Al-15wt.% Cu alloy Inoculated by Al-Ti-B. Scripta Materialia, 2019, 167: 6–10.
Ding W W, Zhao X Y, Chen T L, et al. Effect of rare earth Y and Al-Ti-B master alloy on the microstructure and mechanical properties of 6063 aluminum alloy. Journal of Alloys and Compounds, 2020, 830(25): 154–160.
Wang X J, Xu C, Muhammad A, et al. Effects of Al-Ti-B-RE grain refiner on microstructure and mechanical properties of Al-7.0Si-0.55Mg alloy. Transactions of Nonferrous Metals Society of China, 2014, 24(7): 2244–2250.
Wang Z J, Si N C. Effect of the morphology and distribution of the second phases of Al-Ti-B-RE master alloys on refining commercially pure aluminum. Rare Metal Materials and Engineering, 2015, 44(6): 1494–1499. (In Chinese)
Ma T F, Chen Z Y, Nie Z R, et al. Microstructure of Al-Ti-B-Er refiner and its grain refining performance. Journal of Rare Earths, 2013, 31(6): 622–670.
Yin D S, Zhao J T, Zhang Z K. Effect of Mg-30% Gd on dimensions distribution of TiAl3 particles in Al-5Ti alloys. Foundry Equipment and Technology, 2015 (4): 22–24. (In Chinese)
Birol Y. Production of Al-Ti-B master alloys from Ti sponge and KBF4. Journal of Alloys and Compounds, 2007, 440(1–2): 108–112.
Yang M S, Wang Z F. Investigation of intermetallic compound formed from rapid solidification of Al-Ti-RE alloy. Journal of Rare Earths, 2004, 22(2): 311–314.
Jia Y W, Wang S C, Shu D. Grain size prediction and investigation of 7055 aluminum alloy inoculated by Al-5Ti-1B master alloy. Journal of Alloys and Compounds, 2020, 821: 153504.
Nie J F, Liu X F, Ma X G. Influence of trace boron on the morphology of titanium carbide in an Al-Ti-C-B master alloy. Journal of Alloys and Compounds, 2010, 491(1–2): 113–117.
Li P T, Li Y G, Nie J F, et al. Influence of forming process on three-dimensional morphology of TiB2 particles in Al-Ti-B alloys. Transactions of Nonferrous Metals Society of China, 2012, 22(3): 564–570.
Huang Y C, Shao H B, Xiao Z B, et al. First principle study of AlB2, TiB2 and TiAl3 in Al-Ti-B alloy. The Chinese Journal of Nonferrous Metals, 2018, 28(8): 1491–1498. (In Chinese)
Jia Y W, Wang S B, Huang H J, et al. In situ observation of the Zr poisoning effect in Al alloys inoculated by Al-Ti-B. Metallurgical and Materials Transactions A, 2018, 49(21): 4771–4784.
Julius C. Schuster Martin Palm. Reassessment of the binary aluminum-titanium phase diagram. Journal Phase Equilibria and Diffusion, 2006, 27(3): 252–256.
Wei W, Mao R Y, Wei K X, et al. Effect of equal channel angular pressing on microstructure and grain refining performance of Al-5%Ti master alloy. Materials Science & Engineering A, 2013, 564: 92–96.
Wang Z J, Si N C. Synthesis and refinement performance of the novel Al-Ti-B-RE master alloy grain refiner. Rare Metal Materials and Engineering, 2015, 44(12): 2970–2975.
Zhang L L, Jiang H X, Zhao J Z, et al. A new understanding toward effect of solute Ti on grain refinement of aluminum by Al-Ti-B master alloy: Kinetic behaviors of TiB2 particles and effect of solute Ti. Acta Metallurgica Sinica, 2017, 53(9): 1090–1098. (In Chinese)
Author information
Authors and Affiliations
Corresponding authors
Additional information
Dong-song Yin Male, born in 1974, Ph. D., Professor. His research interest mainly focuses on light alloys. To date, he has published 40 technical papers and 2 books, and holds 5 invention patents of China.
Rights and permissions
About this article
Cite this article
Yin, Ds., Zhang, N., Chen, Kj. et al. Effect of Gd on microstructure and refinement performance of Al-5Ti-B alloy. China Foundry 18, 223–228 (2021). https://doi.org/10.1007/s41230-021-9021-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41230-021-9021-5