Skip to main content
Log in

The Method of Fundamental Solutions for Two- and Three-Dimensional Transient Heat Conduction Problems Involving Point and Curved Line Heat Sources

  • Research Paper
  • Published:
Iranian Journal of Science and Technology, Transactions of Mechanical Engineering Aims and scope Submit manuscript

Abstract

The objective of this paper is to formulate the method of fundamental solutions (MFS) for solving transient heat conduction problems involving concentrated heat sources with time- and space-dependent intensities. The heat sources can be concentrated on points or arbitrary curved paths. In the proposed MFS formulation, a linear combination of time-dependent fundamental solutions and particular solutions is considered for approximating the solution. The particular solutions are expressed as time- and space-dependent integrals, which are computed effectively without considering any internal points or internal cells and without using any kind of time transformation. Several 2D and 3D numerical examples are analyzed. The finite element method (FEM) with a fine mesh and with a small size time step is used to find an accurate reference solution. In comparison to the FEM solution, the proposed MFS formulation achieves accurate results with a small number of source points and a large size time step.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24

Similar content being viewed by others

References

  • Alves CJS, Martins NFM, Valtchev SS (2018) Trefftz methods with cracklets and their relation to BEM and MFS. Eng Anal Bound Elem 95:93–104

    Article  MathSciNet  Google Scholar 

  • Balakrishnan K, Sureshkumar R, Ramachandran PA (2000) An operator splitting-radial basis function method for the solution of transient nonlinear Poisson problems. Comput Math Appl 43:289–304

    Article  MathSciNet  Google Scholar 

  • Burgess G, Mahajerin E (1984) A comparison of the boundary element and superposition methods. Comput Struct 19:697–705

    Article  Google Scholar 

  • Chantasiriwan S (2006) Methods of fundamental solutions for time dependent heat conduction problems. Int J Numer Methods Eng 66:147–165

    Article  Google Scholar 

  • Chen CS, Golberg MA, Hon YC (1998) The method of fundamental solutions and quasi-Monte-Carlo method for diffusion equations. Int J Numer Methods Eng 43:1421–1435

    Article  Google Scholar 

  • Cui M, Xu BB, Feng WZ, Zhang Y, Gao XW, Peng HF (2018) A radial integration boundary element method for solving transient heat conduction problems with heat sources and variable thermal conductivity. Numer Heat Transf B Fundam 73:1–18

    Article  Google Scholar 

  • Curran DAS, Cross M, Lewis BA (1980) Solution of parabolic differential equations by the boundary element method using discretisation in time. Appl Math Model 4:398–400

    Article  MathSciNet  Google Scholar 

  • DeMey G (1985) The auxiliary boundary element method for time dependent problems. J Comput Appl Math 12–13:239–245

    Article  MathSciNet  Google Scholar 

  • Dong CF, Sun FY, Meng BQ (2007) A method of fundamental solutions for inverse heat conduction problems in an anisotropic medium. Eng Anal Bound Elem 31:75–82

    Article  Google Scholar 

  • Dowden JM, Ducharme R, Kapadia PD (1998) Time-dependent line and point sources: a simple model for time-dependent welding processes. Lasers Eng 7:215–228

    Google Scholar 

  • Fairweather G, Karageorghis A (1998) The method of fundamental solutions for elliptic boundary value problems. Adv Comput Math 9:69–95

    Article  MathSciNet  Google Scholar 

  • Grabski JK (2019) On the sources placement in the method of fundamental solutions for time-dependent heat conduction problems. Comput Math Appl. https://doi.org/10.1016/j.camwa.2019.04.023

    Article  MATH  Google Scholar 

  • Hansen P (1992) Analysis of discrete ill-posed problems by means of the L-curve. SIAM Rev 34:561–580

    Article  MathSciNet  Google Scholar 

  • Hematiyan MR, Karami G (2008) A meshless boundary element method formulation for transient heat conduction problems with heat sources. Sci Iran 15:348–359

    MATH  Google Scholar 

  • Hematiyan MR, Mohammadi M, Aliabadi MH (2011) Boundary element analysis of two- and three-dimensional thermo-elastic problems with various concentrated heat sources. J Strain Anal Eng Des 46:227–242

    Article  Google Scholar 

  • Hematiyan MR, Haghighi A, Khosravifard A (2018) A two-constrained method for appropriate determination of the configuration of source and collocation points in the method of fundamental solutions for 2D Laplace equation. Adv Appl Math Mech 10:496–522

    Article  Google Scholar 

  • Hon YC, Li M (2009) A discrepancy principle for the source points location in using the MFS for solving the BHCP. Int J Comput Methods 6:181–197

    Article  MathSciNet  Google Scholar 

  • Johansson BT, Lesnic D, Reeve T (2011) A method of fundamental solutions for two-dimensional heat conduction. Int J Comput Math 88:1697–1713

    Article  MathSciNet  Google Scholar 

  • Lefèvre F, Le Niliot C (2002) The BEM for point heat source estimation: application to multiple static sources and moving sources. Int J Therm Sci 41:536–545

    Article  Google Scholar 

  • Levin P (2008) A general solution of 3-D quasi-steady state problem of a moving heat source on a semi-infinite solid. Mech Res Commun 35:151–157

    Article  MathSciNet  Google Scholar 

  • Mohammadi M, Hematiyan MR, Marin L (2010) Boundary element analysis of nonlinear transient heat conduction problems involving non-homogenous and nonlinear heat sources using time-dependent fundamental solutions. Eng Anal Bound Elem 34:655–665

    Article  MathSciNet  Google Scholar 

  • Mohammadi M, Hematiyan MR, Shiah YC (2018) An efficient analysis of steady-state heat conduction involving curved line/surface heat sources in two/three-dimensional isotropic media. J Theor Appl Mech 56:1123–1137

    Article  Google Scholar 

  • Mohammadi M, Hematiyan MR, Khosravifard A (2019) Analysis of two- and three-dimensional steady-state thermo-mechanical problems including curved line/surface heat sources using the method of fundamental solutions. Eur J Comput Mech 28:51–80

    MathSciNet  Google Scholar 

  • Morse PM, Feshbach H (1953) Methods of theoretical physics. McGraw-Hill, New York

    MATH  Google Scholar 

  • Nowak AJ (1989) The multiple reciprocity method of solving heat conduction problems. In: 11th BEM conference, Cambridge, Massachusetts, USA. Springer, vol 2, pp 81–95

  • Ochiai Y, Kitayama Y (2009) Three-dimensional unsteady heat conduction analysis by triple-reciprocity boundary element method. Eng Anal Bound Elem 33:789–795

    Article  MathSciNet  Google Scholar 

  • Partridge PW, Sensale B (2000) The method of fundamental solutions with dual reciprocity for diffusion and diffusion-convection using subdomains. Eng Anal Bound Elem 24:633–641

    Article  Google Scholar 

  • Reeve T, Johansson BT (2013) The method of fundamental solutions for a time-dependent two-dimensional Cauchy heat conduction problem. Eng Anal Bound Elem 37:569–578

    Article  MathSciNet  Google Scholar 

  • Rizzo FJ, Shippy DJ (1970) A method of solution for certain problems of transient heat conduction. AIAA J 8:2004–2009

    Article  Google Scholar 

  • Shiah YC, Guao TL, Tan CL (2005) Two-dimensional BEM thermoelastic analysis of anisotropic media with concentrated heat sources. Comput Model Eng Sci 7:321–338

    MathSciNet  MATH  Google Scholar 

  • Shiah YC, Hwang PW, Yang RB (2006) Heat conduction in multiply adjoined anisotropic media with embedded point heat sources. J Heat Transf 128:207–214

    Article  Google Scholar 

  • Shiah YC, Chaing YC, Matsumoto T (2016) Analytical transformation of volume integral for the time-stepping BEM analysis of 2D transient heat conduction in anisotropic media. Eng Anal Bound Elem 64:101–110

    Article  MathSciNet  Google Scholar 

  • Sladek J, Sladek V, Zhangb Ch (2004) A local BIEM for analysis of transient heat conduction with nonlinear source terms in FGMs. Eng Anal Bound Elem 28:1–11

    Article  Google Scholar 

  • Sobamowo GM, Jaiyesimi L, Waheed AO (2017) Transient three-dimensional thermal analysis of a slab with internal heat generation and heated by a point moving heat source. Iran J Mech Eng 18:43–64

    Google Scholar 

  • Valtchev SS, Roberty NC (2008) A time-marching MFS scheme for heat conduction problems. Eng Anal Boundary Elem 32:480–493

    Article  Google Scholar 

  • Walker SP (1997) Diffusion problems using transient discrete source superposition. Int J Numer Methods Eng 35:165–178

    Article  Google Scholar 

  • Wrobel LC, Brebbia CA (1979) The boundary element method for steady state and transient heat conduction. In: Numerical methods in thermal problems, first international conference, Swansea, Wales. Pineridge Press

  • Wrobel LC, Brebbia CA (1987) The dual reciprocity boundary element formulation for nonlinear diffusion problems. Comput Methods Appl Mech Eng 65:147–164

    Article  Google Scholar 

  • Young DL, Tsai CC, Murugesan K, Fan CM, Chen CW (2004) Time dependent fundamental solutions for homogeneous diffusion problems. Eng Anal Bound Elem 28:1463–1473

    Article  Google Scholar 

  • Zhu S, Zhang Y, Marchant TR (1995) A DRBEM model for microwave heating problems. Appl Math Model 19:287–297

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Mehrdad Mohammadi.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Mohammadi, M. The Method of Fundamental Solutions for Two- and Three-Dimensional Transient Heat Conduction Problems Involving Point and Curved Line Heat Sources. Iran J Sci Technol Trans Mech Eng 45, 993–1005 (2021). https://doi.org/10.1007/s40997-019-00333-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40997-019-00333-9

Keywords

Navigation