Abstract
In this study, matcha was introduced into the structure of sodium montmorillonite (Na+-MMT), then these new nanoparticles (M-MMT) were added to the polyurethane (PU) and nanocomposites were prepared. The results of the M-MMT investigation by Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) confirmed the presence of matcha in the structure. The results of electrochemical impedance spectroscopy (EIS) and salt spray tests showed that the presence of M-MMT in the matrix improves corrosion resistance. The EIS results showed that nanocomposite containing 3% (by weight) of G-MMT has 6.68 × 1011 Ω.cm2 resistance after 70 days of immersion in the electrolyte solution, while this value was 1.62 × 1011 Ω.cm2 for the neat PU. Also, the effect of M-MMT on the thermal resistance was up to 52 °C. Moreover, the results obtained from tensile tests showed that the strength and elastic modulus increased up to 19 and 180 MPa, respectively. This improvement in mechanical properties is due to the fact that the polymer chains are able to penetrate into the MMT galleries and also the distribution of nanoparticles in the matrix is uniform, which makes the nanocomposite easily eliminate stress without destruction. In addition, the presence of matcha in the structure created antimicrobial properties. Matcha contains phenolic compounds that have the ability to suppress by membrane perturbation, reduction of host ligands adhesion, and neutralizing bacterial toxins. Hence, M-MMT showed inhibitory and killing effects against Streptococcus pyogenes (Gram-positive bacteria) and Klebsiella pneumonia (Gram-negative bacteria).
Graphical abstract
Similar content being viewed by others
Data availability
The datasets generated and/or analyzed during the current study are not publicly available at this time as the data form part of an ongoing study. However, the datasets are available from the corresponding author (Milad Sheydaei, mi_sheydaei@sut.ac.ir) on reasonable request.
References
Goyal A, Pouya HS, Ganjian E, Claisse P (2018) A review of corrosion and protection of steel in concrete. Arab J Sci Eng 43:5035–5055
Angst UM (2018) Challenges and opportunities in corrosion of steel in concrete. Mater Struct 51:1–20
Refait P, Grolleau AM, Jeannin M, Rémazeilles C, Sabot R (2020) Corrosion of carbon steel in marine environments: role of the corrosion product layer. Corros Mater Degrad 1:10
Stefanoni M, Angst U, Elsener B (2018) Corrosion rate of carbon steel in carbonated concrete-A critical review. Cem Concr Res 103:35–48
Nardeli JV, Fugivara CS, Taryba M, Montemor MF, Benedetti AV (2021) Benedetti, biobased self-healing polyurethane coating with Zn micro-flakes for corrosion protection of AA7475. Chem Eng J 404:126478
Nardeli JV, Fugivara CS, Taryba M, Montemor MF, Ribeiro SJ, Benedetti AV (2020) Novel healing coatings based on natural-derived polyurethane modified with tannins for corrosion protection of AA2024-T3. Corros Sci 162:108213
Arriba-Rodriguez LD, Villanueva-Balsera J, Ortega-Fernandez F, Rodriguez-Perez F (2018) Methods to evaluate corrosion in buried steel structures: a review. Metals 8:334
Cicek V (2017) Corrosion engineering and cathodic protection handbook: with extensive question and answer section. John Wiley & Sons
Haghdadeh P, Ghaffari M, Ramezanzadeh B, Bahlakeh G, Saeb MR (2018) The role of functionalized graphene oxide on the mechanical and anti-corrosion properties of polyurethane coating. J Taiwan Inst Chem Eng 86:199–212
Rahman MM, Zahir MH, Haq MB, Shehri DA, Kumar AM (2018) Corrosion inhibition properties of waterborne polyurethane/cerium nitrate coatings on mild steel. Coatings 8:34
Chaubey N, Qurashi A, Chauhan DS, Quraishi MA (2021) Frontiers and advances in green and sustainable inhibitors for corrosion applications: a critical review. J Mol Liq 321:114385
Marzorati S, Verotta L, Trasatti SP (2018) Green corrosion inhibitors from natural sources and biomass wastes. Molecules 24:48
Sivanesan I, Gopal J, Muthu M, Chun S, Oh JW (2021) Retrospecting the antioxidant activity of Japanese matcha green tea-lack of Enthusiasm. Appl Sci 11:5087
Devkota HP, Gaire BP, Hori K, Subedi L, Adhikari-Devkota A, Belwal T, Paudel KR, Jha NK, Singh SK, Chellappan DK, Hansbro PM (2021) The science of matcha: Bioactive compounds, analytical techniques and biological properties. Trends Food Sci Technol 118:735–743
Kochman J, Jakubczyk K, Antoniewicz J, Mruk H, Janda K (2020) Health benefits and chemical composition of matcha green tea: A review. Molecules 26:85
Ohishi T, Goto S, Monira P, Isemura M, Nakamura Y (2016) Anti-inflammatory action of green tea. Antiinflamm Antiallergy Agents Med Chem 15:74–90
Reygaert WC (2018) Green tea catechins: their use in treating and preventing infectious diseases. BioMed Res Int 2018:9105261
Edraki M, Sheydaei M, Zaarei D, Salmasifar A, Azizi B (2022) Protective nanocomposite coating based on ginger modified clay and polyurethane: preparation, characterization and evaluation anti-corrosion and mechanical properties. Polym Sci Ser B 64:756–764
Sheydaei M, Pouraman V, Alinia-Ahandani E, Shahbazi-Ganjgah S (2022) PVCS/GO nanocomposites: investigation of thermophysical, mechanical and antimicrobial properties. J Sulfur Chem 43:376–390
Tan E, Kahyaoğlu İM, Karakuş S (2022) A sensitive and smartphone colorimetric assay for the detection of hydrogen peroxide based on antibacterial and antifungal matcha extract silver nanoparticles enriched with polyphenol. Polym Bull 79:7363–7389
Mistry BD (2009) A Handbook of Spectroscopic Data Chemistry. Oxford Book Company, Jaipur
Sheydaei M (2022) Sodium sulfide-based polysulfide polymers: synthesis, cure, thermal and mechanical properties. J Sulfur Chem 43:643–654
Xia J, Wang D, Liang P, Zhang D, Du X, Ni D, Yu Z (2020) Vibrational (FT-IR, Raman) analysis of tea catechins based on both theoretical calculations and experiments. Biophys Chem 256:106282
Li Y, Xiao J, Tu J, Yu L, Niu L (2021) Matcha-fortified rice noodles: characteristics of in vitro starch digestibility, antioxidant and eating quality. LWT 149:111852
Edraki E, Zaarei D (2018) Evaluation of thermal and antimicrobial behavior of Montmorillonite nanoclay modified with 2-Mercaptobenzothiazole. J Nanoanalysis 5:26–35
de Almeida JC, de Barros A, Mazali IO, Ferreira M (2020) Influence of gold nanostructures incorporated into sodium montmorillonite clay based on LbL films for detection of metal traces ions. Appl Surf Sci 507:144972
Edraki M, Mousazadeh Moghaddampour I, Alinia-Ahandani E, Banimahd Keivani M, Sheydaei M (2021) Ginger intercalated sodium montmorillonite nano clay: assembly, characterization, and investigation antimicrobial properties. Chem Rev Lett 4:120–129
Izadi M, Shahrabi T, Mohammadi I, Ramezanzadeh B (2019) Synthesis of impregnated Na+-montmorillonite as an eco-friendly inhibitive carrier and its subsequent protective effect on silane coated mild steel. Prog Org Coat 135:135–147
Ngo TD, Ton-That MT, Hoa SV, Cole KC (2009) Effect of temperature, duration and speed of pre-mixing on the dispersion of clay/epoxy nanocomposites. Compos Sci Technol 69:1831–1840
Ashhari S, Sarabi AA, Kasiriha SM, Zaarei D (2011) Aliphatic polyurethane–montmorillonite nanocomposite coatings: preparation, characterization, and anticorrosive properties. J Appl Polym Sci 119:523–529
Salmasifar A, Edraki M, Alibakhshi E, Ramezanzadeh B, Bahlakeh G (2021) Theoretical design coupled with experimental study of the effectiveness of the inhibitive molecules based on Cynara scolymus L extract toward chloride-induced corrosion of steel. J Mol Liq 332:115742
Alibakhshi E, Haddadi SA, Motlagh AL, Ghaderi M, Ramezanzadeh B, Mahdavian M, Arjmand M, Jalili M (2022) Epoxy nanocomposite coating based on calcium zinc phosphate with dual active/barrier corrosion mitigation properties. Prog Org Coat 163:106677
Shao F, Yang K, Zhao H, Liu C, Wang L, Tao S (2015) Effects of inorganic sealant and brief heat treatments on corrosion behavior of plasma sprayed Cr2O3-Al2O3 composite ceramic coatings. Surf Coat Technol 276:8–15
Malviya AK, Tambe SP (2017) Accelerated test methods for evaluation of WB coating system comprising of epoxy primer and polyurethane top coat. Prog Color Colorants Coat 10:93–104
Feng Z, Frankel GS (2016) Evaluation of coated Al alloy using the breakpoint frequency method. Electrochim Acta 187:605–615
Hosseini MG, Jafari M, Najjar R (2011) Effect of polyaniline-montmorillonite nanocomposite powders addition on corrosion performance of epoxy coatings on Al 5000. Surf Coat Technol 206:280–286
Huttunen-Saarivirta E, Vaganov GV, Yudin VE, Vuorinen J (2013) Characterization and corrosion protection properties of epoxy powder coatings containing nanoclays. Prog Org Coat 76:757–767
Mostafaei A, Nasirpouri F (2014) Epoxy/polyaniline-ZnO nanorods hybrid nanocomposite coatings: synthesis, characterization and corrosion protection performance of conducting paints. Prog Org Coat 77:146–159
Shahsavari AR, Danaee I, Baniasad F, Panah NB, Eskandari H, Nikmanesh S (2022) Effect of nano cerium oxide on cathodic protection and barrier properties of zinc rich bitumen coatings. Prot Met Phys Chem 58:981–990
Ghiasvand M, Zaarei D, Danaee I, Mogoie B, Nasab HS (2019) Formulation of petrolatum/clay nanocomposite coating and characterization of its corrosion resistance properties. Prot Met Phys Chem 55:1154–1160
Alsabagh AM, Migahed MA, Abdelraouf M, Khamis EA (2015) Utilization of green tea as environmentally friendly corrosion inhibitor for carbon steel in acidic media. Int J Electrochem Sci 10:1855–1872
Edraki M, Zaarei D (2019) Azole derivatives embedded in montmorillonite clay nanocarriers as corrosion inhibitors of mild steel. Int J Miner Metall Mater 26:86–97
Zhao Z, Chen K, Wen S, Wang J, Xu J, Wang S, Li W, Song J (2022) Preparation of Zn5Mo2O11. 5H2O@ sulfonated graphene by template method and its anticorrosion mechanism in polyurethane coatings. Coatings 12:1634
Tan B, Zhang S, Cao X, Fu A, Guo L, Marzouki R, Li W (2022) Insight into the anti-corrosion performance of two food flavors as eco-friendly and ultra-high performance inhibitors for copper in sulfuric acid medium. J Colloid Interface Sci 609:838–851
Xu F, Zhang M, Cui Y, Bao D, Peng J, Gao Y, Lin D, Geng H, Zhu Y, Wang H (2022) A novel polymer composite coating with high thermal conductivity and unique anti-corrosion performance. Chem Eng J 439:135660
Daglia M (2012) Polyphenols as antimicrobial agents. Curr Opin Biotechnol 23:174–181
Aras A, Bursal E, Alan Y, Turkan F, Alkan H, Kılıç Ö (2018) Polyphenolic content, antioxidant potential and antimicrobial activity of Satureja boissieri. Iran J Chem Chem Eng (IJCCE) 37:209–219
Funding
The authors did not receive support from any organization for the submitted work.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Sheydaei, M., Edraki, M. & Abad, F.SJ. Matcha-modified clay polyurethane coating: improving thermal, mechanical, antimicrobial, and anticorrosion performance. Iran Polym J 32, 1643–1654 (2023). https://doi.org/10.1007/s13726-023-01225-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13726-023-01225-1