Abstract
Rotating-jet electrospinning method is one of the efficient techniques for producing aligned nanofibers. This paper reports an accurate investigation on the influence of collector diameter (CD), voltage, polymer concentration (PC), and insulator length (IL) of spinneret on the degree of fiber alignment (DFA), production rate of fiber, and fiber diameter. The polymer solution was a mixture of polyacrylonitrile and N,N-dimethylformamide. The ranges of independent variables were 20–50 cm for CD, 10–22 kV for voltage, 13–19 wt% for PC, and 0.5–3 cm for IL. To minimize the number of required experiments for a complete evaluation, response surface methodology (RSM) and central composite rotatable design were applied by means of Expert Design Software. After defining the upper and lower bounds of the above independent variables in the software, 30 unique experiments were delivered. The recommended operating conditions by the software were exactly applied in the laboratory and the corresponding values for the DFA, production rate, and fiber diameter were measured. The nanofiber morphology was examined by scanning electron microscopy (SEM). By applying the least-squares method in the DX7.0.0 software, well-fitting polynomial correlations to the experimental results were obtained, and using these correlations, the influence of independent variables and responses was comprehensively studied. Finally, the best values of independent variables for optimizing the responses were determined using RSM.
Similar content being viewed by others
References
Ramakrishna S (2005) An introduction to electrospinning and nanofibers. World Scientific Publishing Company Incorporated, Singapore
Huang ZM, Zhang YZ, Kotaki M, Ramakrishna S (2003) A review on polymer nanofibers by electrospinning and their applications in nanocomposites. Compos Sci Technol 63:2223–2253
He J, Guo N, Cui S (2011) Structure and mechanical properties of electrospun tussah silk fibroin nanofibres: variations in processing parameters. Iran Polym J 20:713–724
Reneker DH, Yarin AL, Fong H, Koombhongse S (2000) Bending instability of electrically charged liquid jets of polymer solutions in electrospinning. J Appl Phys 87:4531–4547
Yarin AL, Koombhongse S, Reneker DH (2001) Bending instability in electrospinning of nanofibers. J Appl Phys 89:3018–3026
Adibzadeh S, Bazgir S, Katbab AA (2014) Fabrication and characterization of chitosan/poly(vinyl alcohol) electrospun nanofibrous membranes containing silver nanoparticles for antibacterial water filtration. Iran Polym J 23:645–654
Qin J, Jiang Y, Fu J, Wang Y, Gao W, Wang H (2013) Evaluation of drug release property and blood compatibility of aspirin-loaded electrospun PLA/RSF composite nanofibers. Iran Polym J 22:729–737
Suganya S, Venugopal J, Agnes Mary S, Ramakrishna S, Lakshmi BS, Giri Dev VR (2014) Aloe vera incorporated biomimetic nanofibrous scaffold: a regenerative approach for skin tissue engineering. Iran Polym J 23:237–248
Wang X, Drew C, Lee SH, Senecal KJ, Kumar J, Samuelson LA (2002) Electrospun nanofibrous membranes for highly sensitive optical sensors. Nano Lett 2:1273–1275
Formo E, Lee E, Campbell D, Xia Y (2008) Functionalization of electrospun TiO2 nanofibers with Pt nanoparticles and nanowires for catalytic applications. Nano Lett 8:668–672
Lim SH, Liu XY, Song H, Yarema KJ, Mao HQ (2010) The effect of nanofiber-guided cell alignment on the preferential differentiation of neural stem cells. Biomaterials 31:9031–9039
Mathew G, Hong JP, Rhee JM, Leo DJ, Nah C (2006) Preparation and anisotropic mechanical behavior of highly-oriented electrospun poly(butylene terephthalate) fibers. J Appl Polym Sci 101:2017–2021
Wu H, Lin D, Zhang R, Pan W (2008) ZnO nanofiber field-effect transistor assembled by electrospinning. J Am Ceram Soc 91:656–659
Boland ED, Wnek GE, Simpson DG, Pawlowski KJ, Bowlin GL (2001) Tailoring tissue engineering scaffolds using electrostatic processing techniques: a study of poly (glycolic acid) electrospinning. J Macromol Sci 38:1231–1243
Theron A, Zussman E, Yarin AL (2001) Electrostatic field-assisted alignment of electrospun nanofibres. Nanotechnology 12:384
Ishii Y, Sakai H, Murata H (2008) A new electrospinning method to control the number and a diameter of uniaxially aligned polymer fibers. Mater Lett 62:3370–3372
Dabirian F, Sarkeshik S, Kianiha A (2009) Production of uniaxially aligned nanofibers using a modified electrospinning method: rotating jet. Curr Nanosci 5:318–323
Khamforoush M, Dabirian F, Majedi S (2009) Alignment of electrospun nanofibers and prediction of electrospinning linear speed using a rotating jet. J Polym Sci Technol (Persian) 3:233–242
Khamforoush M, Hatami T, Mahjob M, Dabirian F, Zandi A (2014) Performance evaluation of modified rotating-jet electrospinning method by investigating the effect of collector size on the nanofibers alignment. Iran Polym J 23:569–580
Beilke MC, Zewe JW, Clark JE, Olesik SV (2013) Aligned electrospun nanofibers for ultra-thin layer chromatography. Anal Chim Acta 761:201–208
Yu H, Li T, Chen B, Wu Y, Li Y (2013) Preparation of aligned Eu(DBM)3phen/PS fibers by electrospinning and their luminescence properties. J Colloid Interface Sci 400:175–180
Chen RX, Li Y, He JH (2014) Bubbfil spinning for mass-production of nanofibers. Therm Sci 18:1718–1719
Chen RX, Li Y, He JH (2014) Mini-review on bubbfil spinning process for mass-production of nanofibers. Matéria (Rio de Janeiro) 19:325–343
Sadrejahani M, Hosseini Ravandi SA, Dabirian F (2010) Microstructural characterization of aligned PAN nanofibers collected by hot air flow in electrospinning method. Iran J Polym Sci Technol (Persian) 23:271–281
Lazic ZR (2006) Design of experiments in chemical engineering. Wiley-VCH, Weinheim
Montgomery DC (2008) Design and analysis of experiments. Wiley, Alabama
Khamforoush M, Asgari T, Hatami T, Dabirian F (2014) The influences of collector diameter, spinneret rotational speed, voltage, and polymer concentration on the degree of nanofibers alignment generated by electrocentrifugal spinning method: modeling and optimization by response surface methodology. Korean J Chem Eng 31:1695–1706
Khamforoush M, Asgari T (2015) A modifed electro-centrifugal spinning method to enhance the production rate of highly aligned nanofiber. Nano 2:1550016–1550023
Obeng D, Morrell S, Napier-Munn TJ (2005) Application of central composite rotatable design to modeling the effect of some operating variables on the performance of the three-product cyclone. Int J Miner Proc 76:181–192
Cilliers JJ, Austin RC, Tucker JP (1992) An evaluation of formal experimental design procedures for hydrocyclone modeling. Fluid Mech Appl 12:31–49
Crozier RD (1992) Flotation, theory, reagents and ore testing. Pergamon, UK
Box GEP, Hunter JS, Hunter WG (2005) Statistics for experimenters: design, innovation, and discovery. Wiley Online Library
Ravandi SAH, Toriumi K (1995) Fourier transform analysis of plain weave fabric appearance. Text Res J 65:676–683
Acknowledgments
The financial support of the University of Kurdistan, Iran, is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Khamforoush, M., Agha-Moalapour, R. Optimization of rotating-jet electrospinning process using response surface methodology. Iran Polym J 25, 875–886 (2016). https://doi.org/10.1007/s13726-016-0473-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13726-016-0473-1