Skip to main content
SpringerLink
Log in

Trajectory Tracking of 3D Hybrid Manipulator Through Human Hand Motion

  • Research Article - Mechanical Engineering
  • Published:
Arabian Journal for Science and Engineering Aims and scope Submit manuscript

Abstract

Generally, industrial manipulators have parallel architecture but these are not generally used because of small workspace as compared to serial manipulators. The drawbacks of serial manipulators are their low accuracy and less load carrying capacity. Therefore, hybrid manipulators are considered to be useful because they are combination of serial and parallel manipulators. In this paper, a three-dimensional hybrid manipulator with two parallel manipulators serially connected to each other is proposed. The forward and inverse dynamics of the system is modelled with the help of bond graph. Thumb and index finger of a human right hand are considered as hybrid manipulators in this paper. The objective of present work is to track the trajectory by thumb in three-dimensional space while drawing an arc on a white board with the help of a marker pen. At the end, the simulation results and conclusions are given to prove that the response follows the command with negligible error. Hence, this type of hybrid manipulator is suitable to be used in multi-fingered robotic grippers, pick and place operations, moving things etc.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Kourosh, E.Z.: Kinematics of manipulators with parallelism, modularity and redundancy: analysis and design. Ph.D. dissertation, Montreal, Quebec, Canada (1995)

  2. Ramadan, A.A.; Inoue, K.; Arai, T.; Takubo, T.; Hatta, I.: Micro-nano two-fingered hybrid manipulator hand. In: International Symposium on Micro-Nano Mechatronics and Human Sciences. pp. 32–377 (2007)

  3. Ahmed, A.R.; Takubo, T.; Mae, Y.; Oohara, K.; Arai, K.: Developmental process of a chopstick-like hybrid-structure: two fingered micromanipulator hand for 3-D manipulation of microscopic objects. IEEE Trans. Ind. Electron. 56(4), 1121–1135 (2009)

    Article  Google Scholar 

  4. Arora, R.; Bera, T.K.: A bond graph model for object grasping and fingertip motion. In: International Conference on Aeronautical, Robotics and Manufacturing Engineering ARME Proceedings, pp. 87–94 (2015)

  5. Khurshid, A.; Ghafoor, A.; Malik Afzaal, M.: Robotic grasping and fine manipulation using soft fingertip. In: Advances in Mechatronics, pp. 155–174 (2011)

  6. Vaz, A.; Singh, K.: A bond graph model for the extensor mechanism of human finger. In: 14th National Conference on Machines and Mechanisms NaCoMM Proceedings, pp. 139–145 (2009)

  7. Vaz, A.; Hirai, S.: Modeling a hand prosthesis with word bond graph objects. In: The International Conference on Integrated Modeling & Analysis in Applied Control & Automation, Genoa, Italy (2004)

  8. Peerdeman, B.; Boere, D.; Kallenberg, L.; Stramigioli, S.; Misra, S.: A biomechanical model for the development of myoelectric hand prosthesis control systems. In: 32nd Annual International Conference of the IEEE EMBS Buenos Aires, pp. 519–523 (2010)

  9. Lin, J.; Wu, Y.; Huang, S.T.: Modeling the constraints of human hand motion. In: Proceedings of the Workshop on the Human Motion (IEEE Computer Society Washington, DC, USA), p. 121 (2000)

  10. Zaki, S.A.: Modelling and experimental vibration control of a two link three dimensional manipulator with flexible links. Ph.D. dissertation, London, Ontario (1994)

  11. Mohamed, H.A.F.; Yahya, S.; Moghavvemi, M.; Yang, S.S.: A new inverse kinematics method for three dimensional redundant manipulators. In: ICROS-SICE International Joint Conference, pp. 1557–1562 (2009)

  12. Yahya, S.; Moghavvemi, M.; Almurib, H.A.F.: Joint torque reduction of a three dimensional redundant planar manipulator. Sensors 12, 6869–6892 (2012)

    Article  Google Scholar 

  13. Zhang, Y.; Liu, J.; Wei, He: Vibration control of a non linear three dimensional flexible manipulator trajectory tracking. Int. J. Control 89(8), 1641–1663 (2016)

    Article  MATH  Google Scholar 

  14. Bera, T.K.; Merzouki, R.; Bouamama, B.O.; Samantaray, A.K.: Force control in a parallel manipulator through virtual foundations. J. Syst. Control Eng. 226(8), 1088–1106 (2012)

    Google Scholar 

  15. Arora, R.; Bera, T.K.: Trajectory tracking through overwhelming control of human vertebrae as hybrid manipulator. Simulation 93(3), 251–263 (2017)

    Article  Google Scholar 

  16. Arora, R.; Bera, T.K.: Physical model reduction of a parallel and hybrid manipulator using eigen value sensisitivity method. Iran. J. Sci. Technol. Trans. Mech. Eng. 42(2), 137–147 (2018)

    Article  Google Scholar 

  17. Szufnarowski, F.: Stewart Platform with fixed rotary actuators: a low cost design study. In: Advances in Medical Robotics. Chapter 4, 1st edn. Uniwersytet Rzeszowski, Rzeszow (2013)

  18. Mukherjee, A.; Karmakar, R.; Samantaray, A.K.: Bond Graph in Modeling, Simulation and Fault Identification. CRC Press, Boca Raton (2006)

    Google Scholar 

  19. Granda, J.J.: The role of bond graph modeling and simulation in mechatronics systems: an integrated software tool: Camp-G, Matlab-Simulink. Mechatronics 12, 1271–1295 (2002)

    Article  Google Scholar 

  20. Samantary, A.K.; Belkacem, B.O.: Model Based Process Supervision. Springer, London (2008)

    Google Scholar 

  21. Dauphin-Tanguy, G.; Rahmani, A.; Sueur, C.: Bond graph aided design of controlled systems. Simul. Modell. Pract. Theory 7, 493–513 (1999)

    Article  Google Scholar 

  22. Karnopp, D.C.; Margolis, D.L.; Rosenberg, R.C.: System Dynamics, Modeling and Simulation of Mechatronic Systems. Wiley, New York (2000)

    Google Scholar 

  23. Borutzky, W.: Bond Graphs: A Methodology for Modelling Multidisciplinary Dynamic Systems. SCS Publishing House, Erlangen (2004)

    Google Scholar 

  24. Bera, T.K.; Bhattacharya, K.; Samantaray, A.K.: Evaluation of antilock braking system with an integrated model of full system dynamics. Simul. Model. Pract. Theory 19, 2131–2150 (2011)

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Mechanical Engineering Department, Thapar Institute of Engineering and Technology, 147004, Patiala, India

    R. Arora

  2. Thapar Institute of Engineering and Technology (Deemed University) (Earlier-Thapar University), Patiala, 147004, India

    T. K. Bera

Authors
  1. R. Arora
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. T. K. Bera
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to T. K. Bera.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Arora, R., Bera, T.K. Trajectory Tracking of 3D Hybrid Manipulator Through Human Hand Motion. Arab J Sci Eng 44, 935–947 (2019). https://doi.org/10.1007/s13369-018-3323-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13369-018-3323-y

Keywords

Search

Navigation