Abstract
In general, size, shape and dispersion of phases in alloys significantly affect mechanical properties. In this study, the mechanical properties of Mo-Si-B alloys were experimentally investigated with regards to the refinement of intermetallic compound. To confirm the size effect of the intermetallic compound phases on mechanical properties, two differently sized intermetallic compound powders consisting Mo5SiB2 and Mo3Si were fabricated by mechano-chemical process and high-energy ball milling. A modified powder metallurgy method was used with core-shell intermetallic powders where the intermetallic compound particles were the core and nano-sized Mo particles which formed by the hydrogen reduction of Mo oxide were the shells, leading to the microstructures with uniformly distributed intermetallic compound phases within a continuous α-Mo matrix phase. Vickers hardness and fracture toughness were measured to examine the mechanical properties of sintered bodies. Vickers hardness was 472 Hv for the fine intermetallic compound powder and 415 Hv for the coarse intermetallic compound powder. The fracture toughness was 12.4 MPa·√m for the fine IMC powders and 13.5 MPa·√m for the coarse intermetallic compound powder.
Similar content being viewed by others
References
X. Tan, Y. J. Tan, J. Liu, and T. Jin, Met. Mater. Int. 21, 222 (2015).
Y. Yuan, Z. H. Zhong, Z. S. Yu, H. F. Yin, Y. Y. Dang, X. B. Zhao, Z. Yang, J. T. Lu, J. B. Yan, and Y. Gu, Met. Mater. Int. 21, 659 (2015).
H. U. Hong, K. M. Park, H. S. Kim, I. S. Kim, B. G. Choi, C. Y. Jo, T. K. Woo, and J. H. Lee, Korean J. Met. Mater. 51, 159 (2013).
J. J. Kruzic, J. H. Schneibel, and R. O. Ritchie, Scripta Mater. 50, 459 (2004).
J. H. Schneibel, R. O. Ritchie, J. J. Kruzic, and P. F. Tortorelli, Metall. Mater. Trans. A 36, 525 (2005).
J. J. Kruzic, J. H. Schneibel, and R. O. Ritchie, Metall. Mater. Trans. A 36, 52 (2005).
M. Krüger, S. Franz, H. Saage, M. Heilmaier, J. J. Schneibel, P. Jéhanno, M. Böning, and H. Kestler, Intermetallics 16, 933 (2008).
T. G. Nieh, J. G. Wang, and C. T. Liu, Intermetallics 9, 73 (2001).
J. M. Byun, S. H. Hwang, S. Lee, M. J. Suk, S. T. Oh, and Y. D. Kim, Int. J. Refract. Met. Hard Mater. 53, 61 (2015).
H. Saage, M. Krüger, D. Sturm, M. Heilmaier, J. H. Schneibel, E. George, L. Heatherly, Ch. Somsen, G. Eggeler, and Y. Yang, Acta Mater. 57, 3895 (2009).
Y. J. Lee, Y. I. Seo, S. H. Kim, D. -G. Kim, and Y. D. Kim, Appl. Phys. A 97, 237 (2009).
A. Khorsand Zak, W. H. Abd. Majid, M. E. Abrishami, and Ramin Yousefi, Solid. State. Sci. 13, 251 (2011).
W. T. Sturges and R. M. Harrison, Atmos. Environ. 23, 1083 (1989).
W. V. Schulmeyer and H. M. Ortner, Int. J. Refract. Met. Hard Mater. 20, 261 (2002).
S. X. Li and G. R. Cui, J. Appl. Phys. 101, 083525 (2007).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Byun, J.M., Bang, SR., Park, C.W. et al. Structural size effects of intermetallic compounds on the mechanical properties of Mo-Si-B alloy: An experimental investigation. Met. Mater. Int. 22, 81–86 (2016). https://doi.org/10.1007/s12540-015-5497-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-015-5497-0