Abstract
This paper reports a novel approach for improving the nanotribological properties of silicon (Si) surfaces by topographically and chemically modifying the surfaces. In the first step, Si (100) wafers were topographically modified into nano-pillars by using the photolithography and reactive ion etching (RIE) techniques. Various patterns, including nano-pillars of varying diameters and pitches (distance between pillars), were fabricated. Then, the patterns were coated with a Z-DOL (perfluoropolyether (PFPE)) lubricating film using a dipcoating technique, and this process was followed by thermal treatment. These modified surfaces were tested for their nanotribological properties, namely adhesion and friction forces, using an atomic force microscope (AFM). The results showed that the topographical modification and Z-DOL coating each independently reduced the adhesion and friction forces on the Si surfaces. However, the combination of the two surface treatments was most effective in reducing these forces. This is attributed to the combined effects of the reduction in the real area of contact due to patterning and the low surface energy of the Z-DOL lubricant. Further, it was found that adhesion and friction forces of the surfaces with combined modification varied significantly depending on the diameter of the pillars and the pitch. It is proposed that such a combination of surface modifications promises to be an effective method to improve the nanotribological performance of miniaturized devices, such as MEMS, in which Si is a typical material.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
B. Bhushan ed., Tribology issues and opportunities in MEMS, Kluwer academic, Dordrecht, The Netherlands, (1998).
B. D. Beake and G. J. Leggett, Variation of frictional forces in air with the compositions of heterogeneous organic surfaces, Langmuir 16 (2000) 735–739.
K. L. Johnson, K. Kendall and A. D. Roberts, Surface energy and contact of elastic solid, Proc. R. Soc. Lond. A 324 (1558) (1971) 301–313.
B. Bhushan, Adhesion and stiction: Mechanisms, measurement techniques, and methods for reduction, J. Vac. Sci. Technol. B 21 (2003) 2262–2296.
Y. Ando and I. Ino, The effect of asperity array geometry on friction and pull-off force, Journal of Tribology 119 (1997) 781–787.
B. Bhushan, Handbook of micro/nano tribology, CRC Press, Boca Raton, USA, (1999).
Z. Tao and B. Bhushan, Degradation mechanisms and environmental effects on perfluoropolyether, self-assembled monolayers, and diamond-like carbon films, Langmuir 21 (2005) 2391–2399.
R. Maboudian and R. T. Howe, Critical Review: Adhesion in surface micromechanical structures, J. Vac. Sci. Technol. B 15 (1997) 1–20.
A. Ulman, An introduction to ultrathin organic films from langmuir-blodgett to self-assembly, Academic Press, San Diego, USA, (1991).
B. Bhushan, Tribology and mechanics of magnetic storage devices, Springer Verlag, New York, 1996.
Z. Burton and B. Bhushan, Hydrophobicity, adhesion, and friction properties of nanopatterned polymers and scale dependence for micro-nanoelectromechanical systems, Nano Letters 5 (2005) 1607–1613.
E.-S. Yoon, R. A. Singh, H. Kong, B. Kim, D.-H. Kim, H. E. Jeong and K. Y. Suh, Tribological properties of biomimetic nano-patterned polymeric surfaces on silicon wafer, Tribology Letters 21 (2006) 31–37.
R. A. Singh, D. C. Pham, J. Kim, S. Yang and E.-S. Yoon, Bio-inspired dual surface modification to improve tribological properties at small-scale, Applied Surface Science 255 (2009) 4821–4828.
R. A. Singh, E.-S. Yoon, H. J. Kim, J. Kim, H. E. Jeong and K. Y. Suh, Replication of surfaces of natural leaves for enhanced micro-scale tribological property, Materials Science and Engineering C 27 (2007) 875–979.
R. N. Wenzel, Resistance of solid surfaces to wetting by water, Industrial Engineering Chemistry 28 (1936) 988–994.
A. B. D. Cassie and S. Baxter, Wettability of porous surfaces, Trans. Faraday Soc. 40 (1944) 546–551.
E.-S. Yoon, R. A. Singh, H. J. Oh and H. Kong, Effect of contact area on nano/micro-scale friction, Wear 259 (2005) 1424–1431.
F. P. Bowden and D. Tabor, Friction and Lubrication of Solids, Clarendon Press, Oxford, UK (1950).
Author information
Authors and Affiliations
Corresponding author
Additional information
Eui-Sung Yoon is the Head of the Nano-bio Research Center, Nano-Science Division, Korea Institute of Science and Technology (KIST), Seoul, Korea. He received his B.S., M.S., and Ph.D. degrees in Precision Mechanical Engineering from Hanyang University, Seoul, Korea. He worked with Prof. Bharat Bhushan at the Ohio State University on his sabbatical leave. His research interests focus on micro/nano tribology for MEMS application, biomimetic surface engineering, nanomechatronics, bio-robot, and brain signal recording system.
Duc Cuong Pham received his B.S and M.S. degrees in Mechanical Engineering from Hanoi University of Technology (HUT), Vietnam. He joined the International R&D Academy, Korea Institute of Science and Technology (KIST) in 2001, and received his Ph.D. degree from the University of Science and Technology, Korea, in 2007. Dr. Pham is currently a Visiting Scientist at the NanoBio Research Center, KIST. He is also a member of the Department of Mechanical Engineering, HUT since 1993. His research interests include tribology, nanomechatronics, and surface modifications for MEMS applications.
Rights and permissions
About this article
Cite this article
Pham, D.C., Na, K., Yang, S. et al. Nanotribological properties of silicon nano-pillars coated by a Z-DOL lubricating film. J Mech Sci Technol 24, 59–65 (2010). https://doi.org/10.1007/s12206-009-1128-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-009-1128-3