Skip to main content
Log in

Performance Comparison of Circular and Square RC Columns under Monotonic Loading Conditions

  • Structural Engineering
  • Published:
KSCE Journal of Civil Engineering Aims and scope Submit manuscript

Abstract

Current flexural and shear design methods for reinforced concrete members are mainly based upon the rectangular cross-sectional shape. A simplified new approach for designing circular cross sectional Reinforced Concrete (RC) members might be to convert them to equivalent area, square shapes. An experimental study was performed on reinforced concrete circular cross sections and equivalent area, rectangular cross sectional members. The RC members were tested under non linear monotonic loading conditions, under both flexural and shear controlled conditions. Furthermore, the 3D FEM package COM3D was used to simulate the nonlinear performance of circular and its equivalent area, square members. Experimental and analytical results show that the circular RC members and its equivalent square have similar nonlinear performance (load-deflection behavior) in both flexural and shear controlled failure conditions. A good agreement was found in nonlinear performance of main design criteria; initial stiffness, flexural capacity, and shear capacity of both types. Based upon these results, the proposed approach can be considered satisfactory.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Barrera, A. C., Bonet, J. L., Romero, M. L., and Fernández, M. A. (2012). “Ductility of slender reinforced concrete columns under monotonic flexure and constant axial loa.” Engineering Structures, Elsevier, Vol. 40, pp. 398–412, DOI: 10.1016/j.engstruct.2012.03.012.

    Article  Google Scholar 

  • Cosenza, E., Galasso, C., and Maddaloni, G. (2011). “A simplified method for flexural capacity assessment of circular RC crosssections.” Engineering Structures, Elsevier, Vol. 33, No. 3, pp. 942–946, DOI: 10.1016/j.engstruct.2010.12.015.

    Article  Google Scholar 

  • Japan Society of Civil Engineers (2007). Standard Specifications for Concrete Structures, Design, JSCE, Tokyo, pp. 148–176.

  • Jensen, U. G., Hoang, L. C., Joergensen, H. B., and Fabrin, L. S. (2010). “Shear strength of heavily reinforced concrete members with circular cross section.” Engineering Structures, Elsevier, Vol. 32, No. 3, pp. 617–626, DOI: 10.1016/j.engstruct.2009.11.008.

    Article  Google Scholar 

  • Li, Q. and Belarbi, A. (2013). “Damage assessment of square RC bridge columns subjected to torsion combined with axial compression, flexure, and shear.” KSCE Journal of Civil Engineering, KSCE, Vol. 17, No. 3, pp. 530–539, DOI: 10.1007/s12205-013-0600-x.

    Article  Google Scholar 

  • Maekawa, K., Okamura, H., and Pimanmas, A. (2003). Non-linear mechanics of reinforced concrete, Spon Press, London, pp. 13–175.

    Google Scholar 

  • Mohammed, A. M. Y. and Maekawa, K. (2012). “Global and local impacts of soil confinement on RC pile nonlinearity.” Journal of Advanced Concrete Technology, JSCE, Vol. 10, No. 11, pp. 375–388, DOI: 10.3151/jact.10.375.

    Article  Google Scholar 

  • Mondal, T. G. and Prakash, S. S. (2015). “Effect of tension stiffening on the behaviour of reinforced concrete circular columns under torsion.” Engineering Structures, Elsevier, Vol. 92, pp. 186–195, DOI: 10.1016/j.engstruct.2015.03.018.

    Article  Google Scholar 

  • Pan, Z., Li, B., and Lu, Z. (2014). “Effective shear stiffness of diagonally cracked reinforced concrete beams.” Engineering Structures, Elsevier, Vol. 59, pp. 95–103, DOI: 10.1016/j.engstruct.2013.10.023.

    Article  Google Scholar 

  • Prakash, S., Belarbi, A., and You, Y. M. (2010). “Seismic performance of circular RC columns subjected to axial force, bending, and torsion with low and moderate shear.” Engineering Structures, Elsevier, Vol. 32, No. 1, pp. 46–59, DOI: 10.1016/j.engstruct.2009.08.014.

    Article  Google Scholar 

  • Sun, L. Z., Wu, D. Y., Zhao, J. L., Yang, F., and Li, W. (2017). “Behavior of circular RC columns with two layers of spirals.” KSCE Journal of Civil Engineering, KSCE, Vol. 21, No. 3, pp. 955–963, DOI: 10.1007/s12205-016-0928-0.

    Article  Google Scholar 

  • Tirasit, P. and Kawashima, K. (2007). “Seismic Performance of square reinforced concrete columns under combined cyclic flexural and torsional loadings.” Journal of Earthquake Engineering, Taylor & Francis, Vol. 11, No. 3, pp. 425–452, DOI: 10.1080/13632460601031813.

    Article  Google Scholar 

  • Toongoenthong, K. and Maekawa, K. (2004). “Interaction of pre-induced damages along main reinforcement and diagonal shear in RC members.” Journal of Advanced Concrete Technology, JSCE, Vol. 2, No. 3, pp. 431–443, DOI: 10.3151/jact.2.431.

    Article  Google Scholar 

  • Toongoenthong, K. and Maekawa, K. (2005). “Multi-Mechanical approach to structural performance assessment of corroded RC members in shear.” Journal of Advanced Concrete Technology, JSCE, Vol. 3, No. 1, pp. 107–122, DOI: 10.3151/jact.3.107.

    Article  Google Scholar 

  • Turmo, J., Ramos, G., and Aparicio, A. C. (2009). “Shear truss analogy for concrete members of solid and hollow circular cross section.” Engineering Structures, Elsevier, Vol. 31, No. 2, pp. 455–465, DOI: 10.1016/j.engstruct.2008.09.002.

    Article  Google Scholar 

  • Watanabe, K., Shunya, O., Moe, Y., and Junichiro, N. (2011). “Experimental study on shear capacity of reinforced concrete beams of solid circular cross section.” Journal of Japan Society of Civil Engineers, Ser. E2, Materials and Concrete Structures, JSCE, Vol. 67, No. 2, pp. 200–212, DOI: 10.2208/jscejmcs.67.200.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Ahmed Mohammed Youssef Mohammed.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Mohammed, A.M.Y., Ahmed, A. & Maekawa, K. Performance Comparison of Circular and Square RC Columns under Monotonic Loading Conditions. KSCE J Civ Eng 23, 210–216 (2019). https://doi.org/10.1007/s12205-018-0621-6

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12205-018-0621-6

Keywords

Navigation