Skip to main content
SpringerLink
Log in

Reliability Design of an Electronic Cam Curve for Flying Shear Machine in Short Materials Cutting

  • Published:
Journal of Shanghai Jiaotong University (Science) Aims and scope Submit manuscript

Abstract

The structure and the production process for flying shear machine are introduced first. Then, a quintic polynomial is applied to the design of an electronic cam system for the rotary knife axis in short materials cutting. The dimensionless equation for a quintic polynomial cam curve is deduced. Finally, the curve is plotted with the cam constructor integrated into Siemens engineering development software SCOUT and it is tested with a laboratory platform, which consists of a motion controller SIMOTION and motor drivers SINAMICS S120. The results show that the running stability of the flying shear machine and the position control accuracy of the rotary knife can be effectively improved by using the curve designed in this paper.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. ZHANG Z, LIU F S, WANG P, et al. Methodology to parametric design of cam profile for electronic unit pump [J]. Energy, 2017, 139(15): 170–183.

    Article  Google Scholar 

  2. PENG J Y, WANG W G. Research of the trajectory planning method of multi-bar mechanism driven by electronic cam [J]. Journal of Mechanical Transmission, 2016, 40(2): 1–5 (in Chinese).

    MathSciNet  Google Scholar 

  3. SUTIKNO T, FACTA M, MARKADEH G R A. Progress in artificial intelligence techniques: From brain to emotion [J]. TELKOMNIKA, 2011, 9(2): 201–202.

    Article  Google Scholar 

  4. YANG Y F, LU Y, JIANG T D, et al. Modeling and nonlinear response of the cam-follower oblique-impact system [J]. Discrete Dynamics in Nature and Society, 2016, 2016: 6142501.

  5. XIA B Z, LIU X C, SHANG X, et al. Improving cam profile design optimization based on classical splines and dynamic model [J]. Journal of Central South University, 2017, 24(8): 1817–1825.

    Article  Google Scholar 

  6. CHENG C C, TSENG Y T, WU C D, et al. Fault diagnosis of a high-speed cam-driven pin assembly system [J]. Advances in Materials Science and Engineering, 2016, 2016: 5917408.

  7. FANG R M, CHEN H, LIU X, et al. Optimal synthesis method to cam curve design with SCCA functions family [C]//International Conference on Computer Science and Information Technology. Chengdu, China: IEEE, 2011: 528–532.

    Google Scholar 

  8. FANG R M, CAI J F, LI G. Cam curve synthesis method based on classical splines [J]. Applied Mechanics and Materials, 2013, 312: 69–73.

    Article  Google Scholar 

  9. FANG R M, CAI J F, LI G, et al. An optimal synthesis method to cam curve design with SCCA functions family [C]//International Conference on Information Engineering. Hong Kong, China: IEEE, 2013: 423–432.

    Google Scholar 

  10. GU Q Y, ISHII I. Review of some advances and applications in real-time high-speed vision: Our views and experiences [J]. International Journal of Automation and Computing, 2016, 13(4): 305–318.

    Article  Google Scholar 

  11. SUN R L. A follow-up control system for flying cut [J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2000, 214(4): 327–331.

    Article  Google Scholar 

  12. YU X Y, CHEN L. Singular perturbation adaptive control and vibration suppression of free-flying flexible space manipulators [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2015, 229(11): 1989–1997.

    Google Scholar 

  13. MADHIVANAN N, NARAYANAN K. FPGA implementation of general purpose real time controllerapplied to flying shears in hot rolling mills [C]//International Conference on Computing, Electronics and Electrical Technologies. Kumaracoil, India: IEEE, 2012: 521–525.

    Google Scholar 

  14. PERIC N, PETROVIC I. Flying shear control system [J]. IEEE Transactions on Industry Applications, 1990, 26(6): 1049–1056.

    Article  Google Scholar 

  15. KHARE M R. Automatic system for measuring and controlling the length of a moving product in industries [J]. IEEE Transactions on Instrumentation and Measurement, 2008, 57(4): 781–790.

    Article  Google Scholar 

  16. WEI X L, XUE B J, ZHANG C J. Research on the selection method for shear mechanism based on unascertained measure model [C]//International Conference on System Science, Engineering Design and Manufacturing Informatization. Yichang, China: IEEE, 2010: 220–223.

    Chapter  Google Scholar 

  17. SADEK K H, DAADBIN A. Improved cam profiles for high-speed machinery using polynomial curve fitting [J]. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 1990, 204(2): 127–132.

    Article  Google Scholar 

  18. LIN B J, LIN C C, JYWE W Y, et al. Motioncurve synthesis and geometric design of globoidal cam mechanism with intermittent variable speed [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2007, 221(3): 329–339.

    Google Scholar 

  19. FU Y Y, WEI J H, ZHAOS T. New analyticalmethod and its application in parallel indexing cam profile curve design [C]//International Conference on Test and Measurement. Hong Kong, China: IEEE, 2009: 227–230.

    Google Scholar 

  20. JANG J S, LEE J J, SOHN J H, et al. A cam profile design of a circuit breaker by using multibody dynamics analysis [C]//International Conference on Electric Power Equipment: Switching Technology. Busan, Korea: IEEE, 2015: 412–414.

    Google Scholar 

  21. LI H A, ZHANG J, ZHANG L, et al. A new control curve method for image deformation [J]. TELKOMNIKA, 2014, 12(1): 135–142.

    Article  MathSciNet  Google Scholar 

  22. SONG X, LI H M. Exact solutions of the twodimensional cubic-quintic nonlinear Schr¨odinger equation with spatially modulated nonlinearities [J]. Communications in Theoretical Physics, 2013, 59(3): 290–294.

    Article  MathSciNet  Google Scholar 

  23. ALTINTAS A. Electronic cam motion generation by using stepper motors and gears [J]. Gazi University Journal of Science, 2009, 22(3): 197–201.

    Google Scholar 

  24. ZHAO Y, HUANG J B, ZHANG W W. Design of wear-resitance seeding feeder mechanism of rotary rice transplanter [J]. Transactions of the Chinese Society for Agricultural Machinery, 2011, 42(6): 58–62 (in Chinese).

    Google Scholar 

  25. BARROR M W. Method, apparatus and software for testing a device including both electrical and optical portions: US6765396 [P]. 2004-07-10 [2018-7-20].

  26. LENG H B, WU Y J, PAN X H. Research on cubic polynomial acceleration and deceleration control model for high speed NC machining [J]. Journal of Zhejiang University SCIENCE A, 2008, 9(3): 358–365.

    Article  Google Scholar 

  27. QIU H, LIN C J, LI Z Y, et al. A universal optimal approach to cam curve design and its applications [J]. Mechanism and Machine Theory, 2005, 40(6): 669–692.

    Article  Google Scholar 

  28. BRAUN M, HORN W. Object-oriented programming with SIMOTION: Fundamentals, program examples and software concepts according to IEC 61131-3 [M]. Germany: Publicis, 2017.

    Google Scholar 

  29. ZHOU Y, MIAO Y F. Design of intelligent transportation system based on the technology of information and communication engineering [J]. TELKOMNIKA, 2016, 14(2A): 180–188.

    Article  Google Scholar 

  30. SUTIKNO T. FPGA for robotic applications: From android/humanoid robots to artificial men [J]. TELKOMNIKA Telecommunication Computing Electronics and Control, 2011, 9(3): 401–402.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. School of Mechanical Engineering, Inner Mongolia University of Technology, Hohhot, 010051, China

    Junxi Bi  (毕俊喜), Wenze Fan  (樊文泽) & Bin Liu  (刘 斌)

  2. College of Aviation, Inner Mongolia University of Technology, Hohhot, 010051, China

    Junxi Bi  (毕俊喜)

  3. Institute of Reliability Engineering, University of Electronic Science and Technology of China, Chengdu, 611731, China

    Hongzhong Huang  (黄洪忠)

Authors
  1. Junxi Bi  (毕俊喜)
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Wenze Fan  (樊文泽)
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Hongzhong Huang  (黄洪忠)
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Bin Liu  (刘 斌)
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Junxi Bi  (毕俊喜).

Additional information

Foundation item: the Inner Mongolia Science & Technology Plan Project (No. 102-510001), the Inner Mongolia Autonomous Region Science & Technology Innovation to Guide the Reward Project (No. 102-413128), and the Inner Mongolia Science and Technology Achievement Conversion Project (No. CHZH2018130)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Bi, J., Fan, W., Huang, H. et al. Reliability Design of an Electronic Cam Curve for Flying Shear Machine in Short Materials Cutting. J. Shanghai Jiaotong Univ. (Sci.) 25, 246–252 (2020). https://doi.org/10.1007/s12204-019-2106-2

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12204-019-2106-2

Key words

CLC number

Document code

Search

Navigation