Abstract
The present investigation employed information mining and knowledge learning processes to showcase their efficacy in comprehending the viscoelastic properties of nanocomposites comprising vapor-grown carbon nanofiber and vinyl ester. The study relied solely on the data obtained from an experimental analysis. This study involves an investigation into the utilization of enhanced distance strategy in conjunction with the data-space clustering techniques possibilistic C-means and fuzzy possibilistic C-means. This study employs clustering methodologies to discern patterns of behaviour in the viscoelastic properties of polymer nano-composites. Principal component analysis is utilized as a dimensionality reduction technique to facilitate this analysis. By employing these methodologies, it was feasible to categories the nanocomposite specimens based on diverse attributes and partition the vapour-grown carbon nanofiber and vinyl ester specimens into distinct clusters. This paper emphasizes the significance and utility of data mining methodologies within the realm of materials informatics.
Similar content being viewed by others
References
Tsai, D.M., Lin, C.C.: Fuzzy C-means based clustering for linearly and nonlinearly separable data. Pattern Recognit 44(8), 1750–1760 (2011). https://doi.org/10.1016/j.patcog.2011.02.009
Jain, L.C., Behera, H.S., Mandal, J.K., Mohapatra, D.P.: Computational intelligence in data mining–Volume 2. In: Proceedings of the International Conference on CIDM, 20–21 December 2014, Smart Innov. Syst. Technol, vol. 32, (2015). https://doi.org/10.1007/978-81-322-2208-8
D. T. L.-T. et adaptation de Thierry Vallaud and undefined 2005. An introduction to data mining. ebookyab.ir, [Online]. Available: (2014). https://www.ebookyab.ir/files/sample - Solution Manual for Discovering Knowledge In Data 2nd edition Daniel Larose.pdf
Fayyad, U., Piatetsky-Shapiro, G., Smyth, P.: From data mining to knowledge discovery in databases. AI Magaz. 17(3), 37 (1996)
Lu, Z.Q.J.: The elements of statistical learning: data mining, inference, and prediction. [Online]. Available: (2010). https://academic.oup.com/jrsssa/article-abstract/173/3/693/7077651
Bezdek, J.C.: Pattern recognition with fuzzy objective function algorithms. [Online]. Available: (2013). https://books.google.com/books?hl=en&lr=&id=z6XqBwAAQBAJ&oi=fnd&pg=PR14&dq=Pattern+Recognition+with+Fuzzy+Objective+Function+Algorithm&ots=0i2Ot-EgIr&sig=vosQ7bM2PjkDqmciryjd4THLLiE
Pal, N.R., Pal, K., Keller, J.M., Bezdek, J.C.: A possibilistic fuzzy c-means clustering algorithm. IEEE Trans. Fuzzy Syst. 13(4), 517–530 (2005). https://doi.org/10.1109/TFUZZ.2004.840099
Wu, K.L., Yang, M.S.: Alternative c-means clustering algorithms. Pattern Recognit. 35(10), 2267–78 (2002)
Wang, X., Wang, Y., Wang, L.: Improving fuzzy c-means clustering based on feature-weight learning. Pattern Recognit. Lett. 25(10), 1123–32 (2004)
Hung, W.L., Yang, M.S., Chen, D.H.: Bootstrapping approach to feature-weight selection in fuzzy c-means algorithms with an application in color image segmentation. Pattern Recognit. Lett. 29(9), 1317–25 (2008)
Pooja, R., Kumar, W., Viriyasitavat, K., Yadav, Dhiman, G.: Analysis of clustering algorithms for facility location allocation problems, pp. 597–605, (2023). https://doi.org/10.1007/978-981-19-9228-5_51
Sangwan, P., Kumar, R., Kaur, A., Dhiman, G.: A comprehensive study of various fuzzy C-Means clustering algorithms. In: AI-Enabled Multiple-Criteria Decision-Making Approaches for Healthcare Management, pp. 161–180. IGI Global (2022)
Kumar, R., Joshi, V., Dhiman, G., Viriyasitavat, W.: An improved exponential metric space approach for C-mean clustering analysing. Expert Syst. (2021). https://doi.org/10.1111/exsy.12896
Chandrawat, R.K., Kumar, R., Garg, B.P., Dhiman, G., Kumar, S.: An analysis of modeling and optimization production cost through fuzzy linear programming problem with symmetric and right angle triangular fuzzy number. Adv. Intell. Syst. Comput. 546, 197–211 (2017). https://doi.org/10.1007/978-981-10-3322-3_18
Abuomar, O., et al.: Data mining and knowledge discovery in materials science and engineering: a polymer nanocomposites case study. Adv. Eng. Informatics 27(4), 615–624 (2013). https://doi.org/10.1016/j.aei.2013.08.002
Brilakis, I.K., Soibelman, L., Shinagawa, Y.: Construction site image retrieval based on material cluster recognition. Adv. Eng. Inf. 20(4), 443–52 (2006)
Hussain, F., Hojjati, M., Okamoto, M., Gorga, R.E.: Polymer-matrix nanocomposites, processing, manufacturing, and application: an overview. J. Compos. Mater. 40(17), 1511–75 (2006)
Suh, C., Rajan, K., Vogel, BM., Narasimhan, B., Mallapragada, SK.: Informatics methods for combinatorial materials science. Comb. Mater. Sci., 109-19. (2007) https://books.google.com/books?hl=en&lr=&id=tRdvxlL7mL0C&oi=fnd&pg=PA109&dq=%5B7%5D+C.+Suh,+K.+Rajan,+B.M.+Vogel,+B.+Narasimhan,+S.K.+Mallapragada,+Informatics+methods+for+combinatorial+materials+science,+Combinatorial+Materials+Science+(2007)+109–119&ots=kFrAVpCU_l&sig=jpbJZrmlq3OGrdpplBD8FeM2jFw
Rajan, K.: Materials informatics. Mater. Today. 8(10), 38–45 (2005)
Jolliffe, I.T., Cadima, J.: Principal component analysis: a review and recent developments. Philos. Trans. R. Soc. A Math. Phys. Eng. Sci. 374(2065), 20150202 (2016)
Zhang, J.S., Leung, Y.W.: Improved possibilistic c-means clustering algorithms. IEEE Trans. Fuzzy Syst. 12(2), 209–17 (2004)
Krishnapuram, R., Keller, J.M.: A possibilistic approach to clustering. IEEE Trans. Fuzzy Syst. 1(2), 98–110 (1993). https://doi.org/10.1109/91.227387
Askari, S.: Fuzzy C-Means clustering algorithm for data with unequal cluster sizes and contaminated with noise and outliers: review and development. Expert Syst. Appl. 165, 113856 (2021). https://doi.org/10.1016/j.eswa.2020.113856
Nouranian, S.: Vapor-grown carbon nanofiber/vinyl ester nanocomposites: designed experimental study of mechanical properties and molecular dynamics simulations. [Online]. Available: (2011). https://search.proquest.com/openview/0d296f4bf20307ff4ce45d8fec74c15a/1?pq-origsite=gscholar&cbl=18750
Singh, H., Kumar, R., Prakash, C., Singh, S.: HA-based coating by plasma spray techniques on titanium alloy for orthopedic applications. Mater. Today Procee. 50, 612–628 (2022)
Vasudev, H., Prashar, G., Thakur, L., Bansal, A.: Electrochemical corrosion behavior and microstructural characterization of HVOF sprayed Inconel-718 coating on gray cast iron. J. Fail. Anal. Prev. 21, 250–260 (2021)
Prakash, C., Singh, S., Singh, M., Gupta, M.K., Mia, M., Dhanda, A.: Multi-objective parametric appraisal of pulsed current gas tungsten arc welding process by using hybrid optimization algorithms. Int. J. Adv. Manuf. Technol. 101, 1107–1123 (2019)
Vasudev, H., Thakur, L., Singh, H., Bansal, A.: Effect of addition of Al2O3 on the high-temperature solid particle erosion behaviour of HVOF sprayed Inconel-718 coatings. Mater. Today Commun. 30, 103017 (2022)
Singh, S., Prakash, C., Ramakrishna, S.: Three-dimensional printing in the fight against novel virus COVID-19: technology helping society during an infectious disease pandemic. Technol. Soc. 62, 101305 (2020)
Prashar, G., Vasudev, H.: Structure-property correlation and high-temperature erosion performance of Inconel625-Al2O3 plasma-sprayed bimodal composite coatings. Surf. Coat. Technol. 439, 128450 (2022)
Prakash, C., Singh, G., Singh, S., Linda, W.L., Zheng, H.Y., Ramakrishna, S., Narayan, R.: Mechanical reliability and in vitro bioactivity of 3D-printed porous polylactic acid-hydroxyapatite scaffold. J. Mater. Eng. Perform. 30, 4946–4956 (2021)
Vasudev, H., Thakur, L., Singh, H., Bansal, A.: Mechanical and microstructural behaviour of wear resistant coatings on cast iron lathe machine beds and slides. Kov. Mater. 56(1), 55–63 (2018)
Singh, P., Bansal, A., Vasudev, H., Singh, P.: In situ surface modification of stainless steel with hydroxyapatite using microwave heating. Surf. Topograp. Metrol. Prop. 9(3), 035053 (2021)
Prakash, C., Singh, S., Basak, A., Królczyk, G., Pramanik, A., Lamberti, L., Pruncu, C.I.: Processing of Ti50Nb50 – xHAx composites by rapid microwave sintering technique for biomedical applications. J. Mater. Res. Technol. 9, 242–252 (2020)
Prashar, G., Vasudev, H., Thakur, L.: Influence of heat treatment on surface properties of HVOF deposited WC and Ni-based powder coatings: a review. Surf. Topograp. Metrol. Prop. 9(4), 043002 (2021)
Prakash, C., Nagarajan, R.: Outburst susceptibility assessment of moraine-dammed lakes in western Himalaya using an analytic hierarchy process. Earth. Surf. Proc. Land. 42, 2306–2321 (2017)
Prashar, G., Vasudev, H., Bhuddhi, D.: Manufacturing: Additive manufacturing: expanding 3D printing horizon in industry 4.0. 1–15. (2022)
Singh, S., Prakash, C., Antil, P., Singh, R., Królczyk, G., Pruncu, C.I.: Dimensionless analysis for investigating the quality characteristics of aluminium matrix composites prepared through fused deposition modelling assisted investment casting. Materials. 12, 1907 (2019)
Singh, M., Vasudev, H., Kumar, R., Science, I.M.: Corrosion and tribological behaviour of bn thin films deposited using magnetron sputtering. Int. J. Surf. Eng. Interdiscip. Mater. Sci. 9(2), 24–39 (2021)
Singh, S., Singh, N., Gupta, M., Prakash, C., Singh, R.: Mechanical feasibility of ABS/HIPS-based multi-material structures primed by low-cost polymer printer. Rapid Prototyp. J. 25, 152–161 (2019)
Prashar, G., Vasudev, H.: Surface topology analysis of plasma sprayed Inconel625-Al2O3 composite coating. Mater. Today Procee. 50, 607–611 (2022)
Sandhu, K., Singh, G., Singh, S., Kumar, R., Prakash, C., Ramakrishna, S., Królczyk, G., Pruncu, C.I.: Surface characteristics of machined polystyrene with 3D printed thermoplastic tool. Materials. 13, 2729 (2020)
Prashar, G., Vasudev, H.: Structure–property correlation of plasma-sprayed Inconel625-Al2O3 bimodal composite coatings for high-temperature oxidation protection. J. Therm. Spray Technol. 31(8), 2385–2408 (2022)
Antil, P., Kumar Antil, S., Prakash, C., Krolczyk, G., Pruncu, C.: Multi-objective optimization of drilling parameters for orthopaedic implants. Meas. Control. 53, 1902–1910 (2020)
Mehta, A., Vasudev, H., Singh, S.: Recent developments in the designing of deposition of thermal barrier coatings–A review. Mater. Today Procee. 26, 1336–1342 (2020)
Kumar, N., Grover, A., Manna, J.S., Chohan, R., Kumar, S., Singh, C., Prakash, C.I., Pruncu: Investigating the influence of WEDM process parameters in machining of hybrid aluminum composites. Adv. Compos. Lett. 29, 2633366X20963137 (2020)
Kumar, R., Ranjan, N., Kumar, V., Kumar, R., Chohan, J.S., Yadav, A., Sharma, S., Prakash, C., Singh, S., Li, C.: Characterization of friction stir-welded polylactic acid/aluminum composite primed through fused filament fabrication, J. Mater. Eng. Perform., 1–19. (2021)
Singh, H., Singh, S., Prakash, C.: Current trends in biomaterials and bio-manufacturing, Biomanufacturing 1–34. (2019)
Singh, M., Vasudev, H., Singh, M.: Surface protection of SS-316L with boron nitride based thin films using radio frequency magnetron sputtering technique. J. Electrochem. Sci. Eng. 12(5), 851–863 (2022)
Jin, S.Y., Pramanik, A., Basak, A.K., Prakash, C., Shankar, S., Debnath, S.: Burr formation and its treatments—a review. Int. J. Adv. Manuf. Technol. 107, 2189–2210 (2020)
Prakash, C., Singh, S., Ramakrishna, S., Królczyk, G., Le, C.H.: Microwave sintering of porous Ti–Nb-HA composite with high strength and enhanced bioactivity for implant applications. J. Alloys Compd. 824, 153774 (2020)
Uddin, M., Basak, A., Pramanik, A., Singh, S., Krolczyk, G.M., Prakash, C.: Evaluating hole quality in drilling of Al 6061 alloys. Materials. 11, 2443 (2018)
Pandey, G., Singh, S., Singh, K., Jha, C., Prakash: 3D printed biodegradable functional temperature-stimuli shape memory polymer for customized scaffoldings. J. Mech. Behav. Biomed. Mater. 108, 103781 (2020)
Vasudev, H., Prashar, G., Thakur, L., Bansal, A.: Electrochemical corrosion behavior and microstructural characterization of HVOF sprayed inconel718-Al2O3 composite coatings. Surf. Rev. Lett. 29(02), 2250017 (2022)
Singh, J., Singh, S.: Support vector machine learning on slurry erosion characteristics analysis of Ni-and Co-alloy coatings. Surf. Revi. Lett. 31, 2340006 (2023)
Singh, J., Singh, R., Singh, S., Vasudev, H., Kumar, S.: Reducing scrap due to missed operations and machining defects in 90PS pistons. Int. J. Interact. Des. Manuf. (2022). https://doi.org/10.1007/s12008-022-01071-0
Prashar, G., Vasudev, H.: High temperature erosion behavior of plasma sprayed Al2O3 coating on AISI-304 stainless steel. (2021)
Singh, J., Singh, J.P.: Performance analysis of erosion resistant Mo2C reinforced WC-CoCr coating for pump impeller with Taguchi’s method. Ind. Lubr Tribol. 74, 431–441 (2022). https://doi.org/10.1108/ILT-05-2020-0155
Vasudev, H., Singh, P., Thakur, L., Bansal, A.: Mechanical and microstructural characterization of microwave post processed Alloy-718 coating. Mater. Res. Express 6(12), 1265f1265 (2020)
Singh, J., Gill, H.S., Vasudev, H.: Computational fluid dynamics analysis on effect of particulate properties on erosive degradation of pipe bends. Int. J. Interact. Des. Manuf. (2022). https://doi.org/10.1007/s12008-022-01094-7
Singh, G., Vasudev, H., Bansal, A., Vardhan, S.: Influence of heat treatment on the microstructure and corrosion properties of the Inconel-625 clad deposited by microwave heating. Surf. Topograp. Metrol. Prop. 9(2), 025019 (2021)
Bansal, A., Vasudev, H., Sharma, A.K., Kumar, P.: Investigation on the effect of post weld heat treatment on microwave joining of the Alloy-718 weldment. Mater. Res. Express 6(8), 086554 (2019)
Singh, J., Gill, R., Kumar, S., Mohapatra, S.K.: Comparative analysis on reinforcement of potential additives in WOKA Cermet HVOF Coating subjected to slurry Erosion. Ash Conditions. Iran. J. Mater. Sci. Eng. 19, 0 (2022). https://doi.org/10.22068/ijmse.2834
Singh, M., Vasudev, H., Kumar, R.: Microstructural characterization of BN thin films using RF magnetron sputtering method. Mater. Today Procee. 26, 2277–2282 (2020)
Singh, J., Singh, S., Verma, A.: Artificial intelligence in use of ZrO2 material in biomedical science. J. Electrochem. Sci. Eng. (2022). https://doi.org/10.5599/jese.1498
Singh, J., Vasudev, H., Singh, S.: Performance of different coating materials against high temperature oxidation in boiler tubes–A review. Mater. Today Procee. 26, 972–978 (2020)
Singh, J., Singh, S.: Neural network supported study on erosive wear performance analysis of Y2O3/WC-10Co4Cr HVOF coating. J. King Saud Univ. Eng. Sci. (2022)
Prashar, G., Vasudev, H., Thakur, L., Letters: High-temperature oxidation and Erosion Resistance of Ni-Based thermally-sprayed Coatings used in Power Generation Machinery. A Review. 29(03), 2230003 (2022)
Singh, J., Singh, S., Gill, R.: Applications of biopolymer coatings in biomedical engineering. J. Electrochem. Sci. Eng. (2022). https://doi.org/10.5599/jese.1460
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
This article has not been submitted elsewhere for publication and authors do not have any conflict related to this manuscript and presented data.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Sangwan, P., Kumar, R., Sharma, Y. et al. Application of computing in recognition of input design factors for vapour-grown carbon nanofibers through fuzzy cluster analysis. Int J Interact Des Manuf (2023). https://doi.org/10.1007/s12008-023-01547-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12008-023-01547-7