Abstract
Aiming to advance in the understanding of pollutant dispersion near roads, we measured, simultaneously, vehicle traffic, meteorological parameters, and 24-h average concentration of particulate matter (TSP, PM10, and PM2.5) at several locations downwind two unpaved roads, located on a flat region without any other relevant source of pollutants. We also implemented on a commercial software of computational fluids dynamics (CFD) an air quality model to simulate the dispersion of particles and gas-phase pollutants emitted from roads. Numerical results of monthly and daily averages of total suspended particles (TSP) concentrations showed high correlation with experimental measurements (R2 > 0.94). We found, numerically and experimentally, that the plots of pollutant concentrations vs distance to the road edge converge into a single curve when they are expressed in terms of dimensionless numbers. Profiles of vertical concentration sketch an exponential function at the road edge, an S shape downwind and a flat shape far from the road. Particle size distribution fits a Rosin-Rammler function with average diameter of ~ 7 μm. This distribution remains unaltered downwind the road, which implies that at any location within 1.5 km from the road, PM10 and PM2.5 concentrations are a constant fraction of TSP concentration. Experimental data confirmed this observation. Previous results can be used to determine the size of the area impacted by roads, identify mitigating and adaptive countermeasures, and to improve the accuracy of vehicular emission factors.
Similar content being viewed by others
Abbreviations
- α 1, α 2 :
-
Beta function parameters
- a, b, k :
-
Empirical constants
- C :
-
TSP concentration at surface level (μg/m3)
- C i, j :
-
TSP concentration for i hour and distances j from the road edge (μg/m3)
- \( \overline{C_j} \) :
-
Annual TSP concentration at distance j from the road edge (μg/m3)
- C* :
-
Dimensionless TSP concentration
- d, \( \overline{d\ } \) :
-
Particle diameter and average particle diameter (μm)
- E :
-
TSP mass emission rate per road area (g/s m2)
- E fi :
-
Emission factor for vehicle of size i in kg of TSP per vehicle and per km traveled (kg/VKT)
- F d :
-
Dispersion factor
- f PM10 - f PM2.5 :
-
Fraction of PM10 and PM2.5 with respect to TSP
- f k, q :
-
The frequency at which wind speed of intensity k appears in the wind rose for direction q
- g z :
-
Gravity (m/s2)
- K :
-
Von Karman universal constant
- μ :
-
Fluid molecular viscosity (kg/m·s)
- \( {\dot{m}}_{H,i} \) :
-
Horizontal mass flow of pollutant i at a given distance to the road (kg/s)
- M j :
-
Average weight of the vehicles of size j (Tons)
- n :
-
Spread parameter of the particle size distribution function
- N i :
-
Number of vehicle of size i
- R c, i :
-
Mass emission ratio
- ρ, ρ p :
-
Fluid and particle density (kg/m3)
- s :
-
Silt content of road surface material
- Sc:
-
Schmidt number
- u :
-
Wind speed at height z (m/s)
- u* :
-
Friction velocity (m/s)
- U :
-
Mean wind speed in the x direction (m/s)
- U* :
-
Dimensionless speed ratio
- V s :
-
Settling speed (m/s)
- W :
-
Road width (m)
- w po :
-
Particle emission speed (m/s)
- x :
-
Distance from the road edge (m)
- x e :
-
Equivalent distance from the road (m)
- x*:
-
Non-dimensional distance to the road edge
- Y d :
-
Rosin-Rammler particle size distribution
- z :
-
Height (m)
- z o :
-
Surface roughness (m)
- y+ :
-
Non-dimensional wall distance
References
ANSYS, Inc. (2012) ANSYS FLUENT Theory guide, Release 14.0. Southpointe 275 Technology, Drive Canonsburg
ANSYS, Inc. (2012a) ANSYS FLUENT User’s guide, Release 14.0. Southpointe 275 Technology Drive, Canonsburg
ANSYS, Inc. (2012b) ANSYS FLUENT Getting started guide, Release 14.0. Southpointe 275 Technology Drive, Canonsburg
Baldauf RW, Kinsey JS (2009) Ultrafine particles near a major roadway in Raleigh, North Carolina: downwind attenuation and correlation with traffic-related pollutants. Atmos Environ 43(6):1229–1234. https://doi.org/10.1016/j.atmosenv.2008.11.024
Baldauf R, Thoma E, Isakov V, Long T, Weinstein J, Gilmour I, Cho S, Khlystov A, Chen F, Kinsey J, Hays M, Seila R, Snow R, Shores R, Olson D, Gullett B, Kimbrough S, Watkins N, Rowley P, Bang J, Costa D (2008) Traffic and meteorological impacts on near road air quality: summary of methods and trends from the Raleigh near road study. J Air Waste Manag Assoc 58:865–878. https://doi.org/10.3155/1047-3289.58.7.865
Blocken B, Stathopoulos T, Carmeliet J (2007) CFD simulation of the atmospheric boundary layer: wall function problems. Atmos Environ 41(2):238–252. https://doi.org/10.1016/j.atmosenv.2006.08.019
Blocken B, Janssen WD, Van Hooff T (2012) CFD simulation for pedestrian wind comfort and wind safety in urban areas: general decision framework and case study for the Eindhoven University campus. Environ Model Softw 30:15e34–15e34. https://doi.org/10.1016/j.envsoft.2011.11.009
Chaney AM, Cryer DJ, Nicholl EJ, Seakins PW (2011) NO and NO2 interconversion downwind of two different line sources in suburban environments. Atmos Environ 45(32):5863–5871. https://doi.org/10.1016/j.atmosenv.2011.06.070
Chen JX, Fu X, Wegman J (1999) Real-time simulation of dust behavior generated by a fast traveling vehicle. ACM T Model Comput S 9(2):81–104. https://doi.org/10.1145/333296.333366
Chen H, Bai S, Eisinger D, Niemeier D, Claggett M (2008) Modelling uncertainties and near-road PM 2.5: a comparison of Caline4, Cal3Qhc and Aermod. University of California, Davis
Chock DP (1978) A simple line-source model for dispersion near roadways. Atmos Environ 12:823–832. https://doi.org/10.1016/0004-6981(78)90019-7
Clements AL, Jia Y, Denbleyker A, McDonald-Buller E, Fraser MP, Allen DT, Collins DR, Michel E, Pudota J, Sullivan D, Zhu Y (2009) Air pollutant concentrations near three Texas roadways, part II: chemical characterization and transformation of pollutants. Atmos Environ 43:4523–4534. https://doi.org/10.1016/j.atmosenv.2009.06.044
Dahl A, Gharibi A, Swietlicki E, Gudmundsson A, Bohgard M, Ljungman A, Blomqvist G, Gustafsson M (2006) Traffic generated emissions of ultrafine particles from pavement-tire interface. Atmos Environ 40:1314–1323. https://doi.org/10.1016/j.atmosenv.2005.10.029
Elbir T, Kara M, Bayram A (2010) Comparison of predicted and observed PM 10 concentrations in several urban street canyons. Air Qual Atmos Health 4:121–131. https://doi.org/10.1007/s11869-010-0080-9
Etyemezian V, Ahonen S, Nikolic D, Gillies J, Kuhns H, Gillette D, Veranth J (2004) Deposition and removal of fugitive dust in the arid southwestern United States : measurements and model results. J Air Waste Manag Assoc 54(9):099–111. https://doi.org/10.1080/10473289.2004.10470977
Finn D, Clawson KL, Carter RG, Rich JD, Eckman RM, Perry SG, Heist DK (2010) Tracer studies to characterize the effects of roadside noise barriers on near-road pollutant dispersion under varying atmospheric stability conditions. Atmos Environ 44(2):204–214. https://doi.org/10.1016/j.atmosenv.2009.10.012
Franke J, Hellsten A, Schlnzen H, Carissimo B (2007) Best practice guideline for the CFD simulation of flows in the urban environment. In: COST Action 732: Quality Assurance and Improvement of Microscale Meteorological Models, COST Office, Brussels. Meteorological Institute, Hamburg
Gerardin F, Midoux N (2016) Attenuation of road dust emissions caused by industrial vehicle traffic. Atmos Environ 127:46–54. https://doi.org/10.1016/j.atmosenv.2015.12.006
Gillies JA, Etyemezian V, Kuhns H, Nikolic D, Gillette DA (2005) Effect of vehicle characteristics on unpaved road dust emissions. Atmos Environ 39(13):2341–2347. https://doi.org/10.1016/j.atmosenv.2004.05.064
Hagler GS, Thoma ED, Baldauf RW (2010) High-resolution mobile monitoring of carbon monoxide and ultrafine particle concentrations in a near-road environment. J Air Waste Manag Assoc 60(3):328–336. https://doi.org/10.3155/1047-3289.60.3.328
Hargreaves DM, Wright NG (2007) On the use of the k-ɛ model in commercial CFD software to model the neutral atmospheric boundary layer. J Wind Eng Ind Aerod 95:355–369. https://doi.org/10.1016/j.jweia.2006.08.002
He M, Dhaniyala S (2012) Vertical and horizontal concentration distributions of ultrafine particles near a highway. Atmos Environ 46:225–236. https://doi.org/10.1016/j.atmosenv.2011.09.076
Holmes NS, Morawska L (2006) A review of dispersion modelling and its application to the -dispersion of particles: an overview of different dispersion models available. Atmos Environ 40(30):5902–5928. https://doi.org/10.1016/j.atmosenv.2006.06.003
Huang L, Gong SL, Gordon M, Liggio J, Staebler R, Stroud CA, Jia CQ (2014) Aerosol-computational fluid dynamics modelling of ultrafine and black carbon particle emission, dilution, and growth near roadways. Atmos Chem Phys 14(23):12631–12648. https://doi.org/10.5194/acp-14-12631-2014
Huertas JI, Camacho DA, Huertas ME (2012a) Standardized emissions inventory methodology for open-pit mining areas. Environ Sci Pollut R 19(7):2784–2794. https://doi.org/10.1007/s11356-012-0778-3
Huertas JI, Huertas ME, Solis C (2012b) Characterization of airborne particles in an open pit mining region. Sci Total Environ 423:39–46. https://doi.org/10.1016/j.scitotenv.2012.01.065
Huertas ME, Huertas JI, Valencia A (2017) Vehicular road influence areas. Atmos Environ 151:108–116. https://doi.org/10.1016/j.atmosenv.2016.12.006
IEA (2016) Energy and Air Pollution: World Energy Outlook Special Report 2016. International Energy Agency, Paris, France. https://doi.org/10.1787/weo-2016-en
INV E-123-13 (2013) Determinación de los tamaños de las partículas de los suelos. Instituto Nacional del Vias, Bogotá
Karner AA, Eisinger DS, Niemeier DA (2010) Near-roadway air quality: synthesizing the findings from real-world data. Environ Sci Technol 44(14):5334–5344. https://doi.org/10.1021/es100008x
King RP (2002) Introduction to practical fluid flow. Butterworth-Heinemann, Oxford
Kumar P, Robins A, Vardoulakis S, Britter R (2010) A review of the characteristics of nanoparticles in the urban atmosphere and the prospects for developing regulatory controls. Atmos Environ 44:5035–5052. https://doi.org/10.1016/j.atmosenv.2010.08.016
Kwak KH, Baik JJ, Ryu YH, Lee SH (2015) Urban air quality simulation in a high-rise building area using a CFD model coupled with mesoscale meteorological and chemistry-transport models. Atmos Environ 100:167–177. https://doi.org/10.1016/j.atmosenv.2014.10.059
Launder BE, Spalding DB (1974) The numerical computation of turbulent flows. Comput Methods Appl Mech Eng 3(2):269–289. https://doi.org/10.1016/0045-7825(74)90029-2
Li B, Ho SS, Xue Y, Huang Y, Wang L, Cheng Y, Lee S (2017) Characterizations of volatile organic compounds (VOCs) from vehicular emissions at roadside environment: the first comprehensive study in northwestern China. Atmos Environ 161:1–12. https://doi.org/10.1016/j.atmosenv.2017.04.029
Res 610. Ministry of environment, Bogota
Panofsky HA, Dutton JA (1984) Atmospheric turbulence. John Wiley & Sons, New York
Pant P, Harrison RM (2013) Estimation of the contribution of road traffic emissions to particulate matter concentrations from field measurements: a review. Atmos Environ 77:78–97. https://doi.org/10.1016/j.atmosenv.2013.04.028
Parrish D (2006) Critical evaluation of US on-road vehicle emission inventories. Atmos Environ 40:2888–2300. https://doi.org/10.1016/j.atmosenv.2005.11.033
Pieterse JE, Harms TM (2013) CFD investigation of the atmospheric boundary layer under different thermal stability conditions. J Wind Eng Ind Aerod 121:82–97. https://doi.org/10.1016/j.jweia.2013.07.014
Rexeis M, Hausberger S (2009) Trend of vehicle emission levels until 2020 - prognosis based on current vehicle measurements and future emission legislation. Atmos Environ 43(31):4689–4698. https://doi.org/10.1016/j.atmosenv.2008.09.034
Richards PJ, Hoxey RP (1993) Appropriate boundary conditions for computational wind engineering models using the k-ɛ turbulence model. J Wind Eng Ind Aerod 46:145–153. https://doi.org/10.1016/0167-6105(93)90124-7
Richards PJ, Norris SE (2011) Appropriate boundary conditions for computational wind engineering models revisited. J Wind Eng Ind Aerod 99:257–266. https://doi.org/10.1016/j.jweia.2010.12.008
Richards PJ, Fong S, Hoxey RP (1997) Anisotropic turbulence in the atmospheric surface layer. J Wind Eng Ind Aerod 69(71):903–913. https://doi.org/10.1016/S0167-6105(97)00216-X
Roorda-knape M, Janssena N, Hartoga J, Van Vlieta P, Harssemaa H, Brunekreefa B (1998) Air pollution from traffic in city districts near major motorways. Atmos Environ 32(11):1921–1930. https://doi.org/10.1016/S1352-2310(97)00496-2
Sahlodin AM, Sotudeh-Gharebagh R, Zhu Y (2007) Modelling of dispersion near roadways based on the vehicle-induced turbulence concept. Atmos Environ 41(1):92–102. https://doi.org/10.1016/j.atmosenv.2006.08.004
Sharma N, Gulia S, Dhyani R, Singh A (2013) Performance evaluation of CALINE 4 dispersion model for an urban highway corridor in Delhi. J Sci Ind Res 72(8):521–530
Shen Z, Cui G, Zhang Z (2017) Turbulent dispersion of pollutants in urban-type canopies under stable stratification conditions. Atmos Environ 156:1–14. https://doi.org/10.1016/j.atmosenv.2017.02.017
Snyder MG, Venkatram A, Heist DK, Perry SG, Petersen WB, Isakov V (2013) RLINE: a line source dispersion model for near-surface releases. Atmos Environ 77:748–756. https://doi.org/10.1016/j.atmosenv.2013.05.074
Stull R (2017) Practical meteorology: an algebra-based survey of atmospheric science. Univ. of British Columbia, Vancouver ISBN: 978-0-88865-283-6
Tominaga Y, Stathopoulos T (2011) CFD modelling of pollution dispersion in a street canyon: comparison between LES and RANS. J Wind Eng Ind Aerod 99(4):340–348. https://doi.org/10.1016/j.jweia.2010.12.005
Tong X, Luke E, Smith R (2014) Numerical validation of a near-field fugitive dust model for vehicles moving on unpaved surfaces. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 228(7):747–757. https://doi.org/10.1177/0954407013512291
USEPA (1999) Sampling of ambient air for total suspended particulate matter (SPM) and PM10 using high volume (HV) sampler. Compendium method IO-2.1. US Environmental Protection Agency. Retrived from https://www3.epa.gov/ttnamti1/files/ambient/inorganic/mthd-2-1.pdf. Accessed 18 Feb 2019
USEPA (2003) AP-42, miscellaneous source. Chapter 13, fifth edition. US Environmental Protection Agency. Retrieved from https://www3.epa.gov/ttnchie1/ap42/ch13/. Accessed 18 Feb 2019
USEPA (2006) Revision of emission factors for AP-42. Chapter 13: miscellaneous source. Section 13.2.2: Unpaved Roads (Fugitive Dust Sources). Retrieved from http://www.epa.gov/ttn/chief/ap42/index.html. Accessed 18 Feb 2019
USEPA (2012) National Ambient Air Quality Standards (NAAQS). Environmental Protection Agency. Retrieved from http://www.epa.gov/air/criteria.htm. Accessed 18 Feb 2019
USEPA (2013) National storm water calculator, User’s guide. Retrived from https://www.epa.gov/water-research/national-stormwater-calculator. Accessed 18 Feb 2019
USEPA (2015) Technical support document (TSD) for replacement of CALINE3 with AERMOD for transportation related air quality analyses, EPA- 454/B-15-02. Retrieved from https://www3.epa.gov/scram001/appendix_w/2016/CAL3_AERMOD_Replacement_TSD.pdf. 18 Feb 2019
USEPA (1998) Compilation of air pollutant emission factors, Vol. 1. Stationary, point and area sources, chapter 13.2.2 unpaved roads. US Environmental Protection Agency. Retrieved from https://www3.epa.gov/ttn/chief/ap42/ch13/index.html. Accessed 18 Feb 2019
Vardoulakis S, Fisher BEA, Pericleous K, Gonzalez-Flesca N (2003) Modelling air quality in street canyons: a review. Atmos Environ 37(2):155–182. https://doi.org/10.1016/S1352-2310(02)00857-9
Venkatram A, Isakov V, Seila R, Baldauf R (2009) Modelling the impacts of traffic emissions on air toxics concentrations near roadways. Atmos Environ 43(20):3191–3199. https://doi.org/10.1016/j.atmosenv.2009.03.046
Venkatram A, Snyder M, Isakov V (2013) Modeling the impact of roadway emissions in light wind, stable and transition conditions. Transp Res D Trans Environ 24:110–119
Veranth JM, Seshadri G, Pardyjak E (2003) Vehicle-generated fugitive dust transport: analytic models and field study. Atmos Environ 37:2295–2303. https://doi.org/10.1016/S1352-2310(03)00086-4
Vicente B, Rafael S, Rodrigues V, Relvas H, Vilaça M, Teixeira J, Rafael S (2018) Influence of different complexity levels of road traffic models on air quality modelling at street scale. Air Qual Atmos Health 11(10):1217–1232. https://doi.org/10.1007/s11869-018-0621-1
Wang YJ, Zhang KM (2009) Modelling near-road air quality using a computational fluid dynamics model, CFD-VIT-RIT. Environ Sci Technol 43(20):7778–7783. https://doi.org/10.1021/es9014844
WMO (2008) Guide to Meteorological Instruments and Methods of observation. Guide to Meteorological Instruments and Methods of Observation (Vol. I). WMO, Geneva ISBN 978–92–63-10008-5
Yuan C, Ng E, Norford LK (2014) Improving air quality in high-density cities by understanding the relationship between air pollutant dispersion and urban morphologies. Build Environ 71(2):245–258. https://doi.org/10.1016/j.buildenv.2013.10.008
Zannetti P (1990) Air pollution modelling: theories, computational methods and available software. Springer, New York. ISBN: 1853121002. https://doi.org/10.1007/978-1-4757-4465-1
Zhu Y, Hinds WC, Kim S, Sioutas C (2002) Concentration and size distribution of ultrafine particles near a major highway. J Air Waste Manag Assoc 52(9):1032–1042. https://doi.org/10.1080/10473289.2002.10470842
Zou B, Benjamin Zhan F, Gaines Wilson J, Zeng Y (2010) Performance of AERMOD at different time scales. Simul Model Pract Th 18(5):612–623. https://doi.org/10.1016/j.simpat.2010.01.005
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Huertas Cardozo, J.I., Prato Sánchez, D.F. An experimental and numerical study of air pollution near unpaved roads. Air Qual Atmos Health 12, 471–489 (2019). https://doi.org/10.1007/s11869-019-00678-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11869-019-00678-9