Skip to main content
SpringerLink
Log in

Crystallographic texture change during grain growth

  • Research Summary
  • Simulating Interfaces And Microstructural Evolution
  • Published:
JOM Aims and scope Submit manuscript

Abstract

This article outlines the importance of anisotropic interfacial properties for microstructure evolution. The anisotropic properties of interfaces profoundly affect the development of microstructure during thin film deposition, sintering, grain growth, and recrystallization, to name but a few processes. The properties of interfaces vary from mildly anisotropic, as for the energy of the solid-liquid interface, to strongly anisotropic, as in the case of diffusion rates along grain boundaries. As a companion to this set of articles on interfacial anisotropy, this article demonstrates the connection between grain boundary anisotropy, primarily in mobility, and texture development during grain growth. A Monte Carlo model is used to investigate the evolution of the so-called cube texture component during grain growth of a polycrystal in which the texture is the result of prior deformation.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. E.A. Holm, M. Miodownik, and A.D. Rollett, “On Abnormal Subgrain Growth and the Origin of Recrystallization Nuclei,” Acta materiala, 50 (2003), pp. 2701–2716.

    Article  CAS  Google Scholar 

  2. G. Ceder et al., “Computational Modeling and Simulation for Rechargeable Batteries,” Materials Research Society Bulletin, 27 (8) (2002), pp. 619–623.

    CAS  Google Scholar 

  3. S. Henry, M. Rappaz, and P. Jarry, “〈110〉 Dendrite Growth in Aluminum Feathery Grains,” Metallurgical and Materials Transactions, 29A (1998), pp. 2807–2817A.

    Article  CAS  Google Scholar 

  4. G. Ibe and K. Lücke, “Growth Selection during Recrystallization of Single Crystals,” Recrystallization, Grain Growth & Textures (Metals Park, OH: ASM, 1965), pp. 434–447.

    Google Scholar 

  5. K. Lücke, “The Formation of Recrystallization Textures in Metals and Alloys,” ICOTOM-7, 7th Int. Conf. on Textures of Materials, 1 (1984), pp. 195–210.

    Google Scholar 

  6. R.D. Doherty et al., “Current Issues in Recrystallization,” Materials Science and Engineering A, 238/2 (1997), pp. 219–274.

    Article  Google Scholar 

  7. G. Gottstein and L.S. Shvindlerman, “Grain Boundary Migration in Metals,” CRC Series in Materials Science & Technology (Boca Raton, FL: CRC Press, 1999), p. 385.

    Google Scholar 

  8. F.R. Boutin, “Experimental Demonstration of the Influence of Impurities on the Grain Boundary Migration Rate in Aluminum Recrystallization,” Journal de Physique, C4 (10) (1975), pp. C4.355-C4.365.

    Google Scholar 

  9. K. Lücke and H. Stüwe, “Theory of Impurity Controlled Grain Boundary Motion,” Acta metallurgica, 19 (1971), pp. 1087–1099.

    Article  Google Scholar 

  10. J. Cahn, “The Impurity-Drag Effect in Grain Boundary Motion,” Acta metallurgica, 10 (1962), pp. 789–798.

    Article  CAS  Google Scholar 

  11. M.I. Mendelev and D.J. Srolovitz, “A Regular Solution Model for Impurity Drag on a Migrating Grain Boundary,” Acta materiala, 49 (2001), pp. 589–597.

    Article  CAS  Google Scholar 

  12. Y. Huang and F.J. Humphreys, “The Effect of Solute Elements on Grain Boundary Mobility during Recrystallization of Single-Phase Aluminium Alloys,” Recrystallization & Grain Growth, ed. G. Gottstein and D. Molodov (Aachen, Germany: Springer, 2001), pp. 409–414.

    Google Scholar 

  13. M.P. Anderson et al., “Computer Simulation of Grain Growth—I. Kinetics,” Acta metallurgica, 32 (5) (1984), pp. 783–791.

    Article  CAS  Google Scholar 

  14. D.J. Srolovitz et al., “Computer Simulation of Grain Growth—II. Grain Size Distribution, Topology and Local Dynamics,” Acta metallurgica, 32 (1984), p. 793.

    Article  CAS  Google Scholar 

  15. G.N. Hassold and E.A. Holm, “A Fast Serial Algorithm for the Finite Temperature Quenched Potts Model,” Computers in Physics, 7 (1) (1993), pp. 97–107.

    Article  Google Scholar 

  16. A.D. Rollett, “Texture Development Dependence on Grain Boundary Properties,” Materials Science Forum, 1 (2002), pp. 251–256.

    Article  Google Scholar 

  17. A.D. Rollett and E.A. Holm, “Abnormal Grain Growth—The Origin of Recrystallization Nuclei?” Rex-96, ed. T.R. McNelley, (Warrendale, PA: MRS, 1996), pp. 31–42.

    Google Scholar 

  18. M. Upmanyu et al., “Boundary Mobility and Energy Anisotropy Effects on Microstructural Evolution during Grain Growth,” Interface Science, 10 (2002), pp. 201–216.

    Article  Google Scholar 

  19. F.J. Humphreys, “A Unified Theory of Recovery, Recrystallization and Grain Growth, Based on the Stability and Growth of Cellular Microstructures—I. The Basic Model,” Acta materiala, 45 (1997), p. 4321.

    Google Scholar 

  20. A.D. Rollett and W.W. Mullins, “On the Growth of Abnormal Grains,” Scripta metall. et mater., 36 (9) (1996), pp. 975–980.

    Google Scholar 

  21. B. Radhakrishnan and T. Zacharia, “The Effect of Lattice Temperature on Abnormal Subgrain Growth Simulations using a Monte Carlo Technique,” Interface Science, 10 (2–3) (2002), pp. 171–180.

    Article  Google Scholar 

  22. H.J. Bunge and U. Köhler, “Model Calculations of Primary Recrystallization Textures,” Scripta metallurgica et materiala, 27 (1992), pp. 1539–1543.

    Article  CAS  Google Scholar 

  23. P.S. Lee, A.D. Rollett, and B.L. Adams, “Development and Application of a Disorientation Correlation Function,” ICOTOM-12 (Montréal, Canada: NRC Research Press, 1999), pp. 21–28.

    Google Scholar 

  24. S.I. Wright, B.L. Adams, and K. Kunze, “Application of a New Automatic Lattice Orientation Measurement Technique to Polycrystalline Aluminum,” Materials Science and Engineering, A160 (1993), pp. 229–240.

    CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. the Materials Science & Engineering Department, Carnegie Mellon University, Pittsburgh, PA

    A. D. Rollett

Authors
  1. A. D. Rollett
    View author publications

    You can also search for this author in PubMed Google Scholar

Additional information

For more information, contact A.D. Rollett, Carnegie Mellon University, Materials Science & Engineering Department, Pittsburgh, PA 15213; (412) 268-3177; fax (412) 268-7596; e-mail rollett@andrew.cmu.edu.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Rollett, A.D. Crystallographic texture change during grain growth. JOM 56, 63–68 (2004). https://doi.org/10.1007/s11837-004-0075-9

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11837-004-0075-9

Keywords

Search

Navigation