Abstract
Adaptive composites integrate actuating and sensing materials into a structural material (e.g., the integration of thin shapememory alloy [SMA] wires can function as actuating elements into fiber-reinforced polymer composites). SMA composites can open new perspectives on the development of engineering structures and devices with adaptive shape, stiffness, damping, and other properties. Materials design involving the constitutive modeling of SMA composite thermomechanical responses is a key topic in the development of the adaptive composites. As such, example simulation results obtained using a recently developed composite model are presented.
Similar content being viewed by others
References
C.A. Rogers, Smart Mater., Struct., and Mathematical Issues, ed. C.A. Rogers (Lancaster, PA: Technomic, 1989), pp. 221–228.
Y. Furuya, A. Sasaki, and M. Taya, Mater. Trans. JIM, 34 (1993), pp. 224–230.
J.S.N. Paine and C.A. Rogers, Smart Struct. and Mater. 1994: Smart Struct. and Intelligent Systems, SPIE Vol. 2190, ed. N.W. Hagood (Bellingham, WA: 1994), pp. 402–409.
V. Baburaj and Y. Matsuzaki, J. Intell. Mater. Syst. and Struct. 7 (1996), pp. 427–438.
L.M. Schetky, C. Liang, and C.A. Rogers, in Ref. 3, pp. 422–433.
A. Baz, T. Chen, and J. Ro, in Ref. 3, pp. 436–453.
J.S.N. Paine and C.A. Rogers, Adaptive Struct. and Composite Mater.: Analysis and Application, AD-Vol. 45/MD-Vol. 54, ed. E. Garcia, H. Cudney, and A. Dasgupta (New York: ASME, 1994), pp. 37–46.
Y. Furuya and J. Tani, Mater. Sci. Forum, 327–328 (2000), pp. 91–98; and J. Intell. Mater. Syst. and Struct., 7 (1996), pp. 321–330.
J.A. Balta et al., Proc. MRS Fall Meeting—Symposium: Smart Materials (Warrendale, PA: MRS, 2000); and M. Parlinska et al., submitted to J. Physique IV.
R. Gotthardt, P. Scherrer, and R. Stalmans, Mater. Sci. Forum, 327–328 (2000), pp. 83–90.
Z.G. Wei, R. Sandstrom, and S. Miyazaki, J. Mater. Sci., 33 (1983), pp. 3763–3783.
J. Van Humbeeck and R. Stalmans, Shape Memory Alloys, ed. K. Otsuka and C.M. Wayman (New York: Cambridge University Press, 1998), pp. 149–183.
W.R. Sounders, H.H. Robertshaw, and C.A. Rogers, J. Intell. Mater. Syst. and Struct., 2 (1991), pp. 508–516.
C.A. Rogers, C. Liang, and S. Li, Proc. AIAA 32nd Structures, Structural Dynamics and Mater. Conf., AIAA-91-1145-CP (1991), pp. 1190–1203.
J.S. Paine and C.A. Rogers, J. Intell. Mater. Syst. and Struct., 6 (1995), pp. 210–221.
R. Gotthardt and J.E. Bidaux, Displacive Phase Transformations and Their Applications in Mater. Eng., ed. K. Inoue et al. (Warrendale, PA: TMS, 1998), pp. 157–232.
J.E. Bidaux, J.-A.E. Manson, and R. Gotthardt, Proc. 2nd Int. Conf. Shape Memory and Superelastic Technol., ed. A. Pelton et al. (santa Clara, CA; SMST, 1997), pp. 287–296.
T. Saburi, Shape Memory Alloys, ed. K. Otsuka and C.M. Wayman (New York: Cambridge University Press, 1998), pp. 49–96.
K. Jonnalagadda and N.R. Sottos, Smart Struct. and Mater. 1995: Mathematics and Control in Smart Struct., SPIE Vol. 2242, ed. V.V. Varadan (Bellingham, WA: SPIE, 1995), pp. 143–151.
C.M. Friend, A.P. Atkins, and N.B. Morgan, J. Phys IV, C8 (1995), pp. 1171–1179.
C.J. Doran, Proc. Second European Conf. Smart Struct. and Mater., SPIE Vol. 2361, ed. A. McDonach et al. (Bellingham, WA: SPIE, 1994), pp. 98–105.
K. Tanaka, Res. Mechanica, 18 (1986), pp. 251–263.
L.C. Brinson, J. Intell. Mater. Syst. and Struct., 4 (1993), pp. 229–242.
J.G. Boyd and J.C. Lagoudas, Int. J. of Plasticity, 12 (1996), pp. 805–842.
R. Stalmans, J. Van Humbeeck, and L. Delaey, J. de Phys. IV, C8 (1995), pp. 203–207.
C. Liang and C.A. Rogers, J. Intell. Mater. Syst. and Struct., 1 (1990), pp. 207–234.
P. Šittner, R. Stalmans, and M. Tokuda, Smart Mater. and Struct., 9 (2000), pp. 452–469.
M. Taya et al., Proc. 18th Riso Int. Symp. Mater. Sci.—Polymeric Composites-Expanding the Limits, ed. Andersen et al. (Denmark: Riso National Laboratory, 1997), pp. 191–208.
J.G. Boyd and D.C. Lagoudas, J. Intell. Mater. Syst. and Struct., 5 (1994), pp. 333–346.
X.D. Wu, G.J. Sun, and J.S. Wu, Smart Struct. and Mater. 1999: Mathematics and Control in Smart Structures, SPIE Vol. 3667 (Bellingham, WA: SPIE, 1999), pp. 805–812.
L.C. Brinson et al., J. Intell. Mater. Syst. and Struct., 8 (1997), pp. 12–25.
B.J. Sulivan, J. Intell. Mater. Syst. and Struct., 5 (1994), pp. 825–832.
D.E. Herba et al., J. Intell. Mater. Syst. and Struct., 6 (1995), pp. 220–228.
S.R. White and J.B. Berman, J. Intell. Mater. Syst. and Struct., 9 (1998), pp. 391–400.
J.S.N. Paine and C.A. Rogers, J. Intell. Mater. Syst. and Struct., 6 (1995), pp. 210–221.
G. Wang and M. Shaninpoor, Smart Struct. and Mater. 1996: Mathematics and Control in Smart Structures, SPIE Vol. 2715, ed. V.V. Varadan (Bellingham, WA: SPIE, 1996), pp. 51–57.
D. Vokoun and R. Stalmans, Smart Struct. and Mater. 1999: Mathematics and Control in Smart Structures, SPIE Vol. 3667 (1999), pp. 825–835.
P. Šittner et al., Mater. Sci. Eng. A, 286 (2000), pp. 298–311.
Author information
Authors and Affiliations
Additional information
For more information, contact P. Šittner, Institute of Physics, Academy of Sciences of the Czech Republic, Na Slovance 2, Prague 8, 182 21, Czech Republic; 4202 66052657; fax 4202 821227; e-mail sittner@fzu.cz.
Rights and permissions
About this article
Cite this article
Šittner, P., Stalmans, R. Developing hybrid polymer composites with embedded shape-memory alloy wires. JOM 52, 15–20 (2000). https://doi.org/10.1007/s11837-000-0077-1
Issue Date:
DOI: https://doi.org/10.1007/s11837-000-0077-1