Skip to main content
SpringerLink
Log in

Physico-mechanical properties of coir fiber/LDPE composites: Effect of chemical treatment and compatibilizer

  • Polymer, Industrial Chemistry
  • Published:
Korean Journal of Chemical Engineering Aims and scope Submit manuscript

Abstract

Coir fiber/low density polyethylene (LDPE) composites were fabricated with different fiber loading (10-30 wt%) using compression molding technique. A fiber loading of 20 wt% was found optimum, with maximum mechanical properties. Further, the effect of fiber treatment (alkali and acrylic acid) and compatibilizer (MA-g-LDPE) incorporation on the mechanical and water absorption properties of the LDPE composites were studied and compared. The results showed that MA-g-LDPE incorporation into untreated and treated fiber composites led to improved mechanical properties and water resistance compared with the same composite formulation without MA-g-LDPE. However, treated fiber composites with MA-g-LDPE showed lower mechanical properties than untreated fiber without MA-g- LDPE, due to the removal of hydroxyl groups from the hemicellulose and lignin region of the fiber and degradation of fibers by chemical attack. From SEM studies on the tensile fractured composite samples, a good relationship has been observed between the morphological and mechanical properties.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. V. Kumar, L. Tyagi and S. Sinha, Rev. Chem. Eng., 27, 253 (2011).

    Article  CAS  Google Scholar 

  2. N. Ayrilmis, S. Jarusombuti, V. Fueangvivat and P. Bauchongkol, Fibers Polym., 12, 919 (2011).

    Article  CAS  Google Scholar 

  3. G. G. Silva, D.A. De Souza, J. C. Machado and D.J.J. Hourston, J. Appl. Polym. Sci., 76, 1197 (2000).

    Article  CAS  Google Scholar 

  4. T. H. Nam, S. Ogihara and N. H. Tung, Compos. Part B, 42, 1648 (2011).

    Article  Google Scholar 

  5. B. Bismarck, S. Mishra and T. Lampke, in Natural fibers, biopolymers and biocomposites, A.K. Mohanty, M. Misra and L.T. Drzal, Eds., Boca Raton, Taylor & Francis (2005).

  6. A. Nandi, A. Kale, N. Raghu and P.K.J. Aggarwal, Ind. Acad. Wood Sci., 10, 62 (2013).

    Article  Google Scholar 

  7. H. Gu, Mater. Design, 30, 3931 (2009).

    Article  CAS  Google Scholar 

  8. B. N. Dash, A. K. Rana, S. C. Mishra, H. K. Mishra, S. K. Nayak and S. S. Tripathy, Polym. Plast. Technol. Eng., 39, 333 (2000).

    Article  CAS  Google Scholar 

  9. P.V. Joseph, K. Joseph, S. Thomas, C.K.S. Pillai, V. S. Prasad, G. Groeninckx and M. Sarkissova, Compos. Part A, 34, 253 (2003).

    Article  Google Scholar 

  10. X. Li, L. G. Tabil and S. J. Panigrahi, Polym. Environ., 15, 25 (2007).

    Article  Google Scholar 

  11. M. M. Kabir, H. Wang, K.T. Lau and F. Cardona, Compos. Part B, 43, 2883 (2012).

    Article  CAS  Google Scholar 

  12. J. Rout, M. Misra, S. S. Tripathy, S. K. Nayak and A. K. Mohanty, Compos. Sci. Technol., 61, 1303 (2001).

    Article  CAS  Google Scholar 

  13. S.V. Prasad, C. Pavithran and P.K.J. Rohatgi, Mater. Sci., 18, 1443 (1983).

    Article  CAS  Google Scholar 

  14. N. M. Hai, B. S. Kim and S. Lee, Adv. Compos. Mater., 18, 197 (2009).

    Article  CAS  Google Scholar 

  15. C.W. Lou, C.W. Lin, C. H. Huang, C.T. Hsieh and J.H.J. Lin, J. Reinf. Plast. Compos., 32, 802 (2013).

    Article  Google Scholar 

  16. S.H.P. Bettini, A.B.L.C. Bicudo, I. S. Augusto, L. A. Antunes and P.L.J. Morassi, J. Appl. Polym. Sci., 118, 2841 (2010).

    Article  CAS  Google Scholar 

  17. F. Z. Arrakhiz, M.El Achaby, A. C. Kakou, S. Vaudreuil, K. Benmoussa, R. Bouhfid, O. Fassi-Fehri and A. Qaiss, Mater. Design, 37, 379 (2012).

    Article  CAS  Google Scholar 

  18. M. M. Haque, M. E. Ali, M. Hasan, M. N. Islam and H. Kim, Ind. Eng. Chem. Res., 51, 3958 (2012).

    Article  CAS  Google Scholar 

  19. M. M. Haque, M. S. Islam and M.N.J. Islam, Polym. Res., 19, 9847 (2012).

    Article  Google Scholar 

  20. H.U. Zaman and M.D.H. Beg, Fibers Polym., 15, 831 (2014).

    Article  CAS  Google Scholar 

  21. X. Li, S. Panigrahi and L. G. Tabil, J. Appl. Eng. Agric., 25, 525 (2009).

    Article  CAS  Google Scholar 

  22. S. Mohanty and S.K.J. Nayak, J. Appl. Polym. Sci., 102, 3306 (2006).

    Article  CAS  Google Scholar 

  23. S. Mohanty, S. K. Verma and S. K. Nayak, Compos. Sci. Technol., 66, 538 (2006).

    Article  CAS  Google Scholar 

  24. S.R. Shukala and S.P.J. Roshan, Hazard Mater., 125, 147 (2005).

    Article  Google Scholar 

  25. S. Jayabal, S. Sathiyamurthy, K.T. Loganathan and S. Kalyanasundaram, Bull. Mater. Sci., 35, 567 (2012).

    Article  CAS  Google Scholar 

  26. M. Jannah, M. Mariatti, A. Abu Bakar and H.P.S.A. Khalil, J. Reinf. Plast. Compos., 28, 1519 (2009),.

    Article  CAS  Google Scholar 

  27. ASTM D3039. Association standards testing materials. Standard test method for tensile properties of polymer matrix composite materials.

  28. ASTM D790. Association standards testing materials. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials.

  29. ASTM D570. Association standards testing materials. Standard test method for water absorption of plastics.

  30. A. Espert, W. Camacho and S. J. Karlsson, J. Appl. Polym. Sci., 89, 2353 (2003).

    Article  CAS  Google Scholar 

  31. K. Bilba, M. A. Arsene and A. Ouensanga, Bioresource Technol., 98, 58 (2007).

    Article  CAS  Google Scholar 

  32. P. Garside and P. Wyeth, Stud. Conserv., 48, 269 (2003).

    Article  CAS  Google Scholar 

  33. A. Karmarkar, S. S. Chauhan, J. M. Modak and M. Chanda, Compos. Part A, 38, 227 (2007).

    Article  Google Scholar 

  34. W. Roddouyboon, H.M.M.A. Rashed, M. A. Islam and F.B.J. Rizvi, Naval Architecture Mar. Eng., 3, 1 (2006).

    Google Scholar 

  35. S. K. Chattopadhyay, R. K. Khandal, R. Uppaluri and A. K. Ghoshal, J. Appl. Polym. Sci., 117, 1731 (2010).

    CAS  Google Scholar 

  36. H. S. Tan, Y. Z. Yu, L. L. Liu and L. X. Xing, Adv. Mater. Res., 139–141, 348 (2010).

    Article  Google Scholar 

  37. M. Brahmakumar, C. Pavithran and R. Pillai, Compos. Sci. Technol., 65, 563 (2005).

    Article  CAS  Google Scholar 

  38. H. S. Yang, H. J. Kim, H. J. Park, B. J. Lee and T. S. Hwang, Compos. Struct., 72, 429 (2006).

    Article  Google Scholar 

  39. R. Punyamurthy, D. Sampathkumar, B. Bennehalli and C.V. Srinivasa, Chem. Sci. Trans., 2, 413 (2013).

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Chemical Engineering, Indian Institute of Technology Roorkee, Uttrakhand, India

    Nirupama Prasad, Vijay Kumar Agarwal & Shishir Sinha

Authors
  1. Nirupama Prasad
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Vijay Kumar Agarwal
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Shishir Sinha
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Nirupama Prasad.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Prasad, N., Agarwal, V.K. & Sinha, S. Physico-mechanical properties of coir fiber/LDPE composites: Effect of chemical treatment and compatibilizer. Korean J. Chem. Eng. 32, 2534–2541 (2015). https://doi.org/10.1007/s11814-015-0069-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11814-015-0069-z

Keywords

Search

Navigation