Abstract
Seven different types of phenol formaldehyde (PF) resins samples with five different pH values were used in order to investigate the effects of resin pH on the creep behaviour of cured PF resins. The results suggest that the effect of resin pH value on the creep behaviour of PF resins is significant. Alkali presence increases the hygroscopicity and enhances time dependent creep of PF resins due to the plasticisation of adhesive. The PF resins with a high pH have great potential to develop delayed elastic creep. The acidified resins also develop greater creep rate. Resols reacted under acidic conditions may form linear linkages. These structural changes in cured resins will increase the flexibility of these resins, and thus, enhance the creep rate and therefore improve stress relaxation in glue lines.
Similar content being viewed by others
References
MUSZYNSKI L, WANG F, SHALER S M. Short term creep tests on phenol resorcinol formaldehyde (PRF) resin undergoing moisture content changes[J]. Wood and Fiber Sience, 2002, 34(4): 612–624.
WANG Feng-hu, DAI Fang-tian. Particleboard stress relaxation throughout mechano-sorptive creep of gluelines[J]. J Northeast Foresry University, 1996, 7(1): 73–76. (in Chinese)
CAI Li-pin, WANG Feng-hu. Steady and unsteady state moisture movement in particle boards[J]. Holz als Roh-und Werkstoff, 1994, 52(5): 304–306.
IRLE M A. Physical aspects of wood adhesive boned formation with formaldehyde based adhesive[D]. Bangor: University of Wales, 1986.
WANG Feng-hu. Stress relaxation in phenol formaldehyde bonded particleboards[D]. Bangor: University of Wales, 1992.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Project (03602) supported by the Key Scientific Research Foundation of Ministry of Education, China
Rights and permissions
About this article
Cite this article
Wang, Fh., Hu, Yc. Effect of resin pH on creep behaviour of cured phenol formaldehyde resins. J Cent. South Univ. Technol. 14 (Suppl 1), 306–309 (2007). https://doi.org/10.1007/s11771-007-0270-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-007-0270-2