Skip to main content
SpringerLink
Log in

Development of a robust laser beam bending process for aluminum fuselage structures

  • Production Process
  • Published:
Production Engineering Aims and scope Submit manuscript

Abstract

The aeronautic industry has to face the demand of cost reduction by its customers. These costs are divided into acquisition and operating costs. Both can be reduced by optimization and automation of production steps and by using highly integrated light weight structures. Within the EU-founded FP 6 project ECOSHAPE a laser beam forming (LBF) process for the laser beam bending of complex fuselage aluminum panels has been developed. The aim was to build up the fundamental know-how for an industrial manufacturing process performing most production steps in flat condition due to a minimum of machining costs, technological complexity and a maximum of robustness and reliability. To facilitate the cost intensive qualification of the LBF-process the metallurgical behavior of the aluminum alloys is investigated as well as the influences of the single structural elements of the fuselage panels like stingers and pockets on the forming result. For the industrial upgrade the process is integrated into a discrete control loop using the geometry of the panel as control variable.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. Schumann U (2006) Aviation and climate change: options for mitigation, European aeronautic days 2006, 2006

  2. Kopp R (1995) Flexible Umformtechnik. In: Abschlußkolloquium zu DFG-Schwerpunktprogramm. Mainz

  3. Pfeiffer R (1989) Richten und Umformen mit der Flamme, Die schweißtechnische Praxis, band 10

  4. Magee J, Watkins KG, Steen WM (1998) Laser bending of high strength alloys. J Laser Appl 10/4

    Google Scholar 

  5. Hornfeck T, Silvanus J, Zaeh MF, Schoberth A (2005) ECOSHAPE—a robust laser beam forming process of aluminium alloys for aerospace applications. Proceedings of the 1st international workshop on thermal forming (IWOTE´05)

  6. Yanjin G, Sheng S, Guoqun Z, Yiguo L (2005) Influence of material properties on the laser forming process of sheet metals. J Mater Process Technol 167:124–131 167/pp

    Article  Google Scholar 

  7. Watkins KG, Edwardson SP, Magee J, Dearden G, French P, Cooke RL, Sidhu J, Calder NJ (2001) Laser forming of aerospace alloys. Proceedings of the aerospace manufacturing conference 01

  8. Hornfeck T, Silvanus J, Schoberth A, Zäh MF (2007) Laser beam forming of complex aluminium fuselage structures. Proceedings of the 2nd international conference on new forming technology (ICNFT), pp 221–230

  9. DIN_50125 (2004) Prüfung metallischer Werkstoffe—Zugproben. Beuth Verlag

  10. Merklein M (2001) Laserstrahlumformen von Aluminiumwerkstoffen—Beeinflussung der Mikrostruktur und der mechanischen Eigenschaften, Meisenbach, Bamberg

  11. Gottstein G (1998) Physikalische Grundlagen der Materialkunde. Springer, Heidelberg

    Google Scholar 

  12. Geiger M, Brandt V, Otto A, Menzel T (1999) Concept for a closed loop control system for laser bending of extrusions. The 32nd CIRP international seminar in manufacturing systems, pp 263–271

  13. Thomson G, Pridham A (1997) A feedback control system for laser forming. Mechatronics 7/5:429–441

    Article  Google Scholar 

  14. Toulukain YS, DeWitt PD (1970) Thermal radiativ properties, metallic elements and alloys

  15. Roebuck R, Edwards G, Gee MG (2005) Characterisation of oxidising metal surfaces with a two colour pyrometer. Mater Sci Technol 21/4:831–840

    Article  Google Scholar 

  16. Kim J, Na SJ (2005) Feedback control for 2D free curve laser forming. Opt Laser Technol 37:139–146

    Article  Google Scholar 

  17. Hutterer A (2004) Entwicklung prozessüberwachender Regelkreise für flexible Formgebungsprozesse. Meisenbach, Bamberg

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Institute for Machine Tools and Industrial Management, Boltzmannstrasse 15, 85748, Garching, Germany

    M. F. Zaeh & Tobias Hornfeck

Authors
  1. M. F. Zaeh
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Tobias Hornfeck
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Tobias Hornfeck.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Zaeh, M.F., Hornfeck, T. Development of a robust laser beam bending process for aluminum fuselage structures. Prod. Eng. Res. Devel. 2, 149–155 (2008). https://doi.org/10.1007/s11740-008-0100-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11740-008-0100-x

Keywords

Search

Navigation