Abstract
Fe70-xNixSi7.5B17.5Nb5(x = 0, 5, 10, 15, 20, 25 at.%), (Fe50Ni20)70-yCrySi7.5B17.5Nb5(y = 3, 6, 9, 12 at.%) and (Fe50Ni20)61Cr9CozSi7.5-zB17.5Nb5(z = 2, 4, 6 at.%) alloys were fabricated by the copper mold suction casting method. Structure, corrosion resistance and mechanical properties of the alloys were investigated. The results show that the bulk amorphous alloy with the Co content of 6 at.% has the highest compressive plastic strain (εp = 1.2%) and ultimate compressive strength (σmax = 4110 MPa) and shows the best corrosion resistance with the low corrosion current density (Icorr = 1.149 × 10–8 A cm−2) in artificial seawater solution compared to the other alloys. This study will provide a new approach for the design of corrosion-resistant Fe-based bulk amorphous alloys with excellent mechanical properties.
Similar content being viewed by others
References
W.H. Wang, C. Dong, and C.H. Shek, Bulk Metallic Glasses, Mater. Sci. Eng. R Rep., 2004, 44, p 45–89.
W.C. Ning, H.M. Zhai, R.Z. Xiao et al., The corrosion Resistance Mechanism of Fe-Based Amorphous Coatings Synthesised by Detonation Gun Spraying, J. Mater. Eng., 2020, 29, p 3921–3929.
W.L. Johnson, Bulk Glass-Forming Metallic Alloys: Science and Technology, MRS Bull., 1999, 24, p 42–56.
M. Telford, The Case of Bulk Metallic Glasses, Mater. Today., 2004, 7, p 36–43.
E.N. Zanaeva, A.I. Bazlov, D.A. Milkova et al., High-Frequency Soft Magnetic Properties of Fe-Si-B-P-Mo-Cu Amorphous and Nanocrystalline Alloys, J. Non. Cryst. Solids., 2019, 526, p 119702.
S. Hasani, M. Ansariniya, and A. Seifoddini, Enhancement of Mechanical Properties of a Soft Magnetic Fe-Based Metallic Glass, Mater. Sci. Technol., 2019, 2019(35), p 865–871.
L.M. Zhang, M.C. Yan, S.D. Zhang et al., Significantly Enhanced Resistance to SRB Corrosion via Fe-Based Amorphous Coating Designed with High Dose Corrosion-Resistant and Antibacterial Elements, Corros. Sci., 2020, 164, p 108305.
W.H. Wang, Preamble for the Special Issue of Amorphous Materials, J. Iron Steel Res. Int., 2018, 25, p 599–599.
C.T. Chang, B.L. Shen, and A. Inoue, FeNi-Based Bulk Glassy Alloys with Superhigh Mechanical Strength and Excellent Soft-Magnetic Properties, Appl. Phys. Lett., 2016, 89, p 1–3.
Q.K. Man, A. Inoue, Y.Q. Dong et al., A new CoFe-Based Bulk Metallic Glasses with High Thermoplastic Forming Ability, Scr. Mater., 2013, 69, p 553–556.
A. Inoue, High Strenght Bulk Amorphous Alloys with Low Critical Cooling Rates, Mater. Trans. JIM., 1995, 36, p 866–875.
L.J. Lu, Y.M. Guo, X. Li et al., The Atomic Structure, Magnetic Properties and Bending Ductility of a Novel Fe-P-C-B-Si Amorphous Alloy Investigated by Experiments and ab Initio Molecular Dynamics, J. Alloys. Compd., 2022, 904, p 164101.
V.I. Tkatch, S.G. Rassolov, V.V. Popov et al., Crystallization of Glassy Fe40Ni40P14B6 Alloy on Heating and the Melt Amorphization During Melt-Spinning Processing, J. Phys. Conf. Ser., 2008, 98, p U485–U489.
Z.L. Long, Y. Shao, X.H. Deng et al., Cr effects on Magnetic and Corrosion Properties of Fe-Co-Si-B-Nb-Cr Bulk Glassy Alloys with High Glass-Forming Ability, Intermetallics, 2007, 15, p 1453–1458.
Q.J. Chen, J.L. Liu, X.L. Zhou et al., Effects of High Co Contents in Fe-Cr-Mo-C-B-Y Alloy on the Glass Forming and the Mechanical Properties, Adv. Mater. Res., 2013, 652–654, p 1054–1058.
J.H. Guo, Z. Gao, X.L. Ni et al., Electrochemical Behavior of Bulk Amorphous Steel Fe55M2Cr12 Mo10 B6C13Y2 (M=Ni, Cu, Nb), J. Iron Steel Res. Int., 2010, 17, p 69–73.
S.L. Wang, X.H. Li, X.F. Zhang et al., Effects of Cr Contents in Fe-Based Bulk Metallic Glasses on the Glass Forming Ability and the Corrosion Resistance, Mater. Chem. Phys., 2009, 113, p 878–883.
S.K. Sharma, P. Mukhopadhyay, P.K. Chauhan et al., Studies on the Corrosion of Two Multicomponent Iron Base Metallic Glasses in Potassium Sulphate Solution, Corros. Sci., 1990, 30, p 313–324.
W.M. Yang, H.H. Liu, Y.C. Zhao et al., Mechanical Properties and Structural Features of Novel Fe-Based Bulk Metallic Glasses with Unprecedented Plasticity, Sci. Rep., 2014, 4, p 6233.
B.L. Shen, A. Inoue, and C.T. Chang, Superhigh Strength and Good Soft-Magnetic Properties of (Fe, Co)-B-Si-Nb Bulk Glassy Alloys with High Glass-Forming Ability, Appl. Phys. Lett., 2004, 85, p 4911.
J. Chen, J.Z. Wang, B. Chen et al., Tribocorrosion Behaviors of Inconel 625 Alloy Sliding Against 316 Steel in Seawater, Tribol. Trans., 2011, 54, p 514–522.
D. Szewieczek, J. Tyrlik-Held, and Z. Paszenda, Corrosion Investigations of Nanocrystalline Iron Based Alloy, J. Mater. Process. Technol., 1998, 78, p 1–3.
A. Gebert, U. Wolff, A. John et al., Corrosion Behaviour of Mg65Y10Cu25 Metallic Glass, Scr. Mater., 2000, 43, p 279–283.
R.M. Fernández-Domene, E. Blasco-Tamarit, D.M. García-García et al., Passive and Transpassive Behaviour of Alloy 31 in a Heavy Brine LiBr Solution, Electrochim. Acta, 2013, 95, p 1–11.
W.J. Bottaab, J.E. Berger, C.S. Kiminami et al., Corrosion Resistance of Fe-Based Amorphous Alloys, J. Alloys. Compd., 2014, 586, p S105–S110.
A. Baron, D. Szewieczek, and G. Nawrat, Corrosion of Amorphous and Nanocrystalline Fe-Based Alloys and its Influence on Their Magnetic Behavior, Electrochim. Acta, 2007, 52, p 5690–5695.
H.Y. Tong, F.G. Shi, and E.J. Lavernia, Enhanced Oxidation Resistance of Nanocrystalline FeBSi Materials, Scr. Metall. Mater., 1995, 511, p 511–516.
C.A.C. Souza, S.E. Kuri, F.S. Politti et al., Corrosion Resistance of Amorphous and Polycrystalline FeCuNbSiB Alloys in Sulphuric Acid Solution, J. Non Cryst. Solids, 1999, 247, p 69–73.
J.F. Wang, R. Li, R.J. Xiao et al., Compressibility and Hardness of Co-Based Bulk Metallic Glass: A Combined Experimental and Density Functional Theory Study, Appl. Phys. Lett., 2011, 99, p 1.
Y. Li, Z.D. Chen, W.S. Zhu et al., The Relationship Between Elastic Deformation and Plastic Deformation of Materials are Discussed, Rock Soil Mech., 1988, 9, p 43–52.
J.M. Park, G. Wang, S. Pauly et al., Ductile Ti-Based Bulk Metallic Glasses with High Specific Strength, Metall. Mater. Trans. A, 2011, 42, p 1456–1462.
M.D. Demetriou, M.E. Launey, G. Garrett et al., A Damage-Tolerant Glass, Nat. Mater., 2011, 10, p 123–128.
Funding
National Natural Science Foundation of China (51861021,51661016,51971103,51571105); Science and Technology Plan of Gansu Province(21YF5GA074); Public Welfare Project of Zhejiang Natural Science Foundation(LGG22E010008); Key Research Program of Education Department of Gansu Province(GSSYLXM-03).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
We declare that we have no financial and personal relationships with other people or organizations that can inappropriately influence our work, and there is no professional or other personal interest of any nature or kind in any product, service and/or company that could be construed as influencing the position presented in, or the review of, the manuscript entitled.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Li, C., Wang, H., Li, J. et al. Corrosion and Mechanical Properties of Novel Fe-Based Bulk Amorphous Alloys. J. of Materi Eng and Perform 32, 3974–3979 (2023). https://doi.org/10.1007/s11665-022-07371-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-022-07371-6