Abstract
Step-by-step control is very important in the manufacturing of thermoelectric generators and cooling modules. Of key importance is quality control of thermoelectric material rods, and discs cut from such rods. This work describes two installations for measuring the Seebeck coefficient, electrical conductivity, and thermal conductivity of rods, as well as for measuring the Seebeck coefficient and electrical conductivity of discs. It is established that using such devices in the practice of manufacture of cooling modules enables enhancement of module quality and reduction of material waste by 7% to 15%.
Similar content being viewed by others
References
L.I. Anatychuk, Thermoelements and Thermoelectric Devices (Kyiv: Naukova Dumka, 1979), p. 768.
A.S. Okhotin, A.S. Pushkarsky, R.P. Borovikova, and V.A. Simonov, Methods for Measuring Characteristics of Thermoelectric Materials and Converters (Moscow: Nauka, 1974), p. 167.
V.V. Razinkov, J. Thermoelectr. 4, 68 (2002).
V.V. Lysko, J. Thermoelectr. 4, 46 (2006).
L.I. Anatychuk, V.T. Dimitraschuk, O.J. Luste, and E.B. Tereschenko, Izvestia VUZov 2, 146 (1970).
L.I. Anatychuk and V.V. Lysko, J. Thermoelectr. 4, 92 (2010).
A.L. Vainer, Thermoelectric Parameters and Their Measurement (Odessa: Negotsiant Studio, 1998).
Yu.V. Vorobyov, V.N. Dobrovolsky, and V.I. Strikha, Methods for Investigation of Semiconductors (Kyiv: Vyscha Shkola, 1988), p. 232.
L.I. Anatychuk and V.V. Lysko, J. Thermoelectr. 1, 74 (2008).
T.C. Harman, J. Appl. Phys. 29, 1373 (1958).
R.J. Buist, Proceedings of the XI International Conference on Thermoelectrics (Arlington, TX: UTA Univ. of Texas, 1992), p. 196.
L.I. Anatychuk, M.V. Havrylyuk, and V.V. Lysko, J. Thermoelectr. 3, 41 (2010).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Anatychuk, L.I., Havrylyuk, N.V. & Lysko, V.V. Methods and Equipment for Quality Control of Thermoelectric Materials. J. Electron. Mater. 41, 1680–1685 (2012). https://doi.org/10.1007/s11664-012-1973-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-012-1973-1