Abstract
Pressure vessels made for petrochemical and power plants using Cr-Mo steel must be thick (≥400 mm) and have high tensile strength (≥600 MPa). However, the tensile strength in the middle portion of the vessel is very low as a result of ferrite formation. Therefore, research was performed to study the ferrite transformation that occurs in the middle portion of high-thickness Cr-Mo steel when Nb is added to it. The ferrite-formation start time of the continuous-cooling-transformation (CCT) curve decreased with an increase in Nb content until the latter reached 0.05 pct. On cooling from the austenitizing temperature, some of the NbC present at the austenitizing temperature of 1203 K (930 °C) goes into austenite solution in the temperature range of 1173 K to 1073 K (900 °C to 800 °C). However, the ferrite curve shifted to the left for the alloy containing 0.075 pct Nb. It is postulated that the surplus NbC could act as ferrite nucleation sites despite the lower cooling rate. As a result, the hardenability improved in the order of the following Nb content: 0.05 pct, 0.025 pct, 0 pct, and 0.075 pct.
Similar content being viewed by others
References
Y. Murakami, T. Nomura, and J. Watanabe: ASTM ATP, 1982, vol. 755, no. 1, p. 383.
M.L. Shaw, T.B. Cox, and W.C. Leslie: J. Mater. Energ. Syst., 1987, vol. 8A, pp. 347-55.
T. Wada and T.B. Cox: ASME Publication MPC, 1984, vol. 21, p. 77.
S.J. Manganello: ASME Publication MPC, 1982, vol. 18, p. 153.
J.A. Todd, D.W. Chung, and E.R. Park: ASME Publication MPC, 1982, vol. 18, p. 179.
I. Kozazu, H. Suzuki, M. Yamada, and H. Tagawa: ASME Publication MPC, 1984, vol. 21, p. 53.
R.J. Kar and J.A. Todd: ASTM-STP, 1982, vol. 755, pp. 228-52.
T. Ishiguro, Y. Murakami, K. Ohnishi, and J. Watanabe: ASTM-STP, 1982, vol. 755, p. 129-76.
F. Masuyama: ISIJ Int., 2001, vol. 41, no. 6, pp. 612-25.
Anonymous: The Japan Steel Works, Report No. MR83-3, 1983.
R.O. Ritchie, E.R. Parker, P.N. Spencer, and J.A. Todd: J. Mater. Energ. Syst., 1984, vol. 6A, pp. 151-62.
R.L. Bodnar, T. Ohhashi, and R.I. Jaffee: Metall. Trans. A, 1989, vol. 20A, p. 1445.
K. Miyata, M. Igarashi, and Y. Sawaragi: ISIJ Int., 1999, vol. 39A, pp. 947-54.
R.L. Klueh and R.W. Swindeman: Metall. Trans. A, 1986, vol. 17A, pp. 1027-34.
P. Ho, D.F. Mitchell, and M.J. Graham: Appl. Surf. Sci., 1983, vol. 15A, pp. 108-19.
T. Wada and W.C. Hagel: Metall. Trans. A, 1976, vol. 7A, pp. 1419-26.
J. Yu and C.J. McMahon: Metall. Trans. A, 1980, vol. 11A, pp. 277-300.
S. Sato, S. Matsui, T. Enami, and T. Tobe: ASTM-STP, 1982, vol. 755, pp. 363-82.
H.R. Lin: J. Mater. Sci., 1997, vol. 32A, pp. 5005-10.
R.J. Mostert and G.T. Van Rooyen: Metall. Trans. A, 1984, vol. 15A, p. 2185.
V. Raghavan: J. Phase Equil., 2003, vol. 24, pp. 57-61.
C. Fossaert, G.I. Rees, T. Maurickx, and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 21-30.
G.I. Rees, J. Perdrix, T. Maurickx, and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 1995, vol. 194A, pp. 179-86.
F. Chun, F. Hong-Sheng, Z. Yan-Kang, and B. Bing-Zhe: J. Iron Steel Res. Int., 2010, vol. 17A, pp. 53-8.
R. Priestner and M.S. Bring: Metal Sci., 1973, vol. 7A, pp. 60-4.
S. Kawaguchi, T. Hashimoto, I. Tamura, and Y. Ohtani: THERMEC, vol. 88, ISIJ, Tokyo, Japan, 1998, p. 330.
M.H. Thomas and G.M. Michael: Proc. Int. Conf. on Solid-Solid Phase Transformations, TMS-AIME, Warrendale, PA, 1983, p. 469.
H. Ohtsuka, M. Umemoto, and I. Tamura: THERMEC, vol. 88, ISIJ, Transformations, TMS-AIME, Warrendale, PA, 1983, p. 469.
H. Niakana and A. Najafizadeh: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5410-4.
T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, U.K., 2002, pp. 93-117.
M. Tamura, H. Iida, H. Esaka, and K. Shinozuka: ISIJ Int., 2003, vol. 43, no. 11, pp. 1807-13.
D. Séférian and E.E. Bishop: The Metallurgy of Welding, Chapman and Hall, London, U.K., 1962.
D.D. Lundin, B.J. Kruse, and M.R. Pendly: Welding Research Council Bulletin 277, United Engineering Centre, New York, NY, 1982.
K.W. Andrews: J. Int. Steel Inst., 1965, vol. 203, p. 721.
V.K. Lakshmanan and J.S. Kirkaldy: Metall. Trans. A, 1984, vol. 15A, pp. 541-4.
W.G. Jung, Y. Kita, T. Tanaka, and Z. Morita: Trans. Jpn. Inst. Met., 1988, vol. 29, no. 9, pp. 718-26.
J. Moon and C. Lee: Acta Mater., 2009, vol. 57, pp. 2311-20.
L. Kaufman and H. Bernstein: Computer Calculation of Phase Diagram, Academic Press Inc., New York, NY, 1970.
N. Saunders and A.P. Miodownik: CALPHAD (Calculation of Phase Diagrams): A Comprehensive Guide, Pergamon Press, New York, NY, 1998.
Acknowledgment
This work was supported by grants-in-aid for the National Core Research Center Program from MOST/KOSEF (No. R15-2006-022-02004-0).
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted December 16, 2011.
Rights and permissions
About this article
Cite this article
Lee, S., Na, H., Kim, B. et al. Effect of Niobium on the Ferrite Continuous-Cooling-Transformation (CCT) Curve of Ultrahigh-Thickness Cr-Mo Steel. Metall Mater Trans A 44, 2523–2532 (2013). https://doi.org/10.1007/s11661-013-1616-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-013-1616-z