Skip to main content
Log in

Synthesis of a novel UV-curable oligmer 1,4-cyclohexanedimethanol glycidyl ether acrylate and study on its UV-curing properties

  • Organic Materials
  • Published:
Journal of Wuhan University of Technology-Mater. Sci. Ed. Aims and scope Submit manuscript

Abstract

A novel UV-curable oligmer 1,4-cyclohexanedimethanol glycidyl ether acrylate (CHDMGEA) was synthesized by utilizing 1,4-cyclohexanedimethanol glycidyl ether (CHDMGE) and acrylic acid (AA) as starting materials, triphenyl phosphine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were that the concentration of triphenyl phosphine was 0.90% of reactants by weight, the concentration of p-hydroxyanisole was 0.20% of reactants by weight, the reaction temperature was 90–100 °C, and the molar ratio of CHDMGE to AA was 0.5:1.1. The experimental results show that CHDMGEA is a kind of good UV-curable oligmer. The impact resistance of the UV-cured films with CHDMGEA as oligmer to prepare UV-curing coating was superior to that of the UV-cured films with bisphenol A diglycidyl ether diacrylate (BPGEA) as oligmer to prepare UV-curing coating.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Masamitsu Shirai. Reworkable UV Curing Materials [J]. Prog. Org. Coat, 2007, 58: 158–165

    Article  Google Scholar 

  2. sangermano M, lak N, Malucelli G, et al. UV-curing and Characterization of Polymer-clay Nanocoatings by Dispersion of Acrylatefuntionalized Organoclays [J]. Prog. Org. Coat, 2008, 61: 89–94

    Article  Google Scholar 

  3. HUANG Biwu, CHEN Weiqing, YANG Zhihong, et al. Synthesis of a Novel UV-curable Prepolymer Hexanediol Diglycidyl Ether Diacrylate and Its Cured Film Tensile Property[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2011, 26(1):4–9

    Article  Google Scholar 

  4. Wang F, Hu JQ, Tu WP. Study on Microstructure of UV-curable Polyurethane Acrylate Films [J]. Prog. Org. Coat, 2008, 62: 245–250

    Article  Google Scholar 

  5. Güay Bayramoğlu, M Vezir Kahraman, Nilhan Kayaman-Apohan, et al. Synthesis and Characterization of UV-curable Dual Hybrid Oligomers Based on Epoxy Acrylate Containing Pendant Alkoxysilane Groups[J]. Prog. Org. Coat, 2006, 57: 50–55

    Article  Google Scholar 

  6. LIU Hai-tao, MO Jian-hua, HUANG Xiao-mao. Research on the Mechanical of Accelerator for Photocurable Resin in 3D Printing[J]. Journal of Donghua University (Eng. Ed.), 2009, 26(1):16–19

    Google Scholar 

  7. Ferry PW Melchels, Jan Feijen, Dirk W Grijpma. A Review on Stereolithography and Its Applications in Biomedical Engineering[J]. Biomaterials, 2010, 31(24): 6 121–6 130

    Article  Google Scholar 

  8. Salmoria GV, Klauss P, Pires ATN, et al. Investigations on Cure Kinetics and Thermal Degradation of Stereolithography RenshapeTM5260 Photosensitive Resin[J]. Polym. Test., 2008, 27: 698–704

    Article  Google Scholar 

  9. Salmoria GV, Ahrens CH, Beal VE, et al. Evaluation of Post-curing and Laser Manufacturing Parameters on the Properties of SOMOS 7110 Photosensitive Resin Used in Stereolithography[J]. Mater. Des., 2009, 30: 758–763

    Article  Google Scholar 

  10. Decker C, Moussa K. Kinetic Study of Light-induced Polymerization by Real-time UV and IR Spectroscopy [J]. J. Polym. Sci., Polym. Chem., 1993, 30(5):913–928

    Article  Google Scholar 

  11. Pappas SP. UV-curing Science and Technology [M]. New York: Plenum Press, 1992, 64–71

    Google Scholar 

  12. Crivello JV, Ortiz RA. Synthesis of Epoxy Monomers That undergo Synergistic Photopolymerization by a Radical-induced Cationic Mechanism [J]. J. Polym. Chem., 2001, 39(20): 3 578–3 592

    Article  Google Scholar 

  13. Decker C, Thi Viet TN, Thi HP. Photoinitiated Cationic Polymerization of Epoxides[J]. Polym Int, 2001, 50(9): 986–997

    Article  Google Scholar 

  14. Kumar V, Bhardwaj YK, Goel NK, et al. Coating Characteristics of Electron Beam Cured Bisphenol A Diglycidyl Ether Diacrylate-co-Aliphatic Urethane Diacrylate Resins [J]. Surf Coat Technol, 2008, 202(21): 5 202–5 209

    Article  Google Scholar 

  15. Young-Jun Park, Dong-Hyuk Lim, Hyun-Joong Kim, et al. UV- and Thermal-Curing Behaviors of Dual-curable Adhesives Based on Epoxy Acrylate Oligomers [J]. Int. J. Adhes., 2009, 29: 710–717

    Article  Google Scholar 

  16. Crivello JV, Ortiz RA. Design and Synthesis of Highly Reactive Photopolymerizable Epoxy Monomers[J]. J. Polym. Sci. Polym. Chem., 2001, 39(14):2385–2395

    Article  Google Scholar 

  17. Stanislovaityte E, Priola A, Sangermano M, et al. Cationic Photopolymerization of Bisphenol-A-based Vinyl Ether Systems[J]. Prog. Org. Coat, 2009, 65: 337–340

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Biwu Huang  (黄笔武).

Additional information

Funded by the Natural Science Foundation of Jiangxi Province(20142BAB206029)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Huang, B., Deng, C., Xu, Q. et al. Synthesis of a novel UV-curable oligmer 1,4-cyclohexanedimethanol glycidyl ether acrylate and study on its UV-curing properties. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 29, 1283–1289 (2014). https://doi.org/10.1007/s11595-014-1082-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11595-014-1082-5

Key words

Navigation