Abstract
The LiNi0.5Mn1.5O4 cathode material with high working voltage is a promising cathode material for next-generation lithium-ion batteries. In this investigation, LiNi0.5Mn1.5O4 materials with different particle sizes and crystal morphologies were synthesized by a modified solid-state method at different temperatures (750, 800, 850, and 900 °C). The evolution panorama of morphology and surface orientation with the temperature change of LiNi0.5Mn1.5O4 cathode materials were studied. The X-ray diffraction and scanning electron microscopy results showed that with the increase of temperature, the particle sizes increased and the crystal growth became more and more complete. Electrochemical tests showed that the material calcined under 850 °C exhibits a truncated octahedral structure and the best electrochemical performance. It delivers a discharge capacity of 124 mA h g−1 at 1 C; even at a high rate of 10 C, a capacity of 90 mA h g−1 can be obtained. The discharge capacity retention of the material is 91.2% after 150 cycles. In addition, the sample prepared by acetate reactant shows excellent electrochemical performance due to the truncated octahedron structure consisted of {111} and {100} surface as well as the appropriate particle size of ~ 1 μm. The {111} surface is conducive to stabilize the material structure, and {100} surface is conducive to the transfer of Li+ ion and electrons. At the same time, it also founded that the appropriate particle size could reduce the electrolyte corrosion of the material and easy for Li+ ion migration. As a result, the material exhibits an improved electrochemical performance.
Similar content being viewed by others
References
Armand M, Tarascon JM (2008) Building better batteries. Nature 451:652–657
Hammond GP, Hazeldine T (2015) Indicative energy technology assessment of advanced rechargeable batteries. Appl Energy 138:559–571
Xu J, Dou S, Liu H, Dai L (2013) Cathode materials for next generation lithium ion batteries. Nano Energy 2:439–421
Liu G, Kong X, Sun H, Wang B, Yi Z, Wang Q (2014) A facile template method to synthesize significantly improved LiNi0.5Mn1.5O4 using corn stalk as a bio-template. Electrochim Acta 141:141–148
Manthiram A, Chemelewski K, Lee ES (2013) A perspective on the high-voltage LiNi0.5Mn1.5O4 spinel cathode for lithium-ion batteries. Energy Environ Sci 7:1339–1350
Xiao J, Chen X, Sushko PV, Sushko ML, Kovarik L, Feng J, Deng Z, Zheng J, Graff GL, Nie Z, Choi D, Liu J, Zhang JG, Whittingham MS (2012) High performance LiNi0.5Mn1.5O4 spinel controlled by Mn3+ concentration and site disorder. Adv Mater 24:2109–2116
Okubo M, Mizuno Y, Yamada H, Kim J, Hosono E, Zhou H, Kudo T, Honma I (2010) Fast Li-ion insertion into nanosized LiMn2O4 without domain boundaries. ACS Nano 4:741–752
Wang Y, Li H, He P, Hosono E, Zhou H (2010) Nano active materials for lithium-ion batteries. Nanoscale 2:1294–1305
Zhang X, Cheng F, Yang J, Chen J (2013) LiNi(0.5)Mn(1.5)O4 porous nanorods as high-rate and long-life cathodes for Li-ion batteries. Nano Lett 13:2822–2825
Qian Y, Fu Y, Wang X, Xia H (2014) LiNi0.5Mn1.5O4 nanorod clusters as cathode material for high energy and high power lithium-ion batteries. J Nanosci Nanotechnol 14:7038–7044
Lin HB, Zhang YM, Hu JN, Wang YT, Xing LD, Xu MQ, Li XP, Li WS (2014) LiNi0.5Mn1.5O4 nanoparticles: synthesis with synergistic effect of polyvinylpyrrolidone and ethylene glycol and performance as cathode of lithium ion battery. J Power Sources 257:37–44
Cai Y, Huang SZ, She FS, Liu J, Zhang RL, Huang ZH, Wang FY, Wang HE (2016) Facile synthesis of well-shaped spinel LiNi0.5Mn1.5O4 nanoparticles as cathode materials for lithium ion batteries. RSC Adv 6:2785–2792
Sheng L, Guo M, Bing G, Zeheng Y, Xiaoming F, Zhangxian C et al (2016) Kinetically controlled synthesis of LiNi0.5Mn1.5O4 micro- and nanostructured hollow spheres as high-rate cathode materials for lithium ion batteries. Ind Eng Chem Res 55(35):9352–9361
Lin HB, Zhang YM, Rong HB, Mai SW, Hu JN, Liao YH, Xing LD, Xu MQ, Li XP, Li WS (2014) Crystallographic facet-and size-controllable synthesis of spinel LiNi0.5Mn1.5O4 with excellent cyclic stability as cathode of high voltage lithium ion battery. J Mater Chem A 2:11987–11995
Chen Z, Zhao R, Li A, Hu H, Liang G, Lan W, Cao Z, Chen H (2015) Polyhedral ordered LiNi0.5Mn1.5O4 spinel with excellent electrochemical properties in extreme conditions. J Power Sources 274:265–273
Kim JH, Pieczonka NPW, Li Z, Wu Y, Harris S, Powell BR (2013) Understanding the capacity fading mechanism in LiNi0.5Mn1.5O4/graphite Li-ion batteries. Electrochim Acta 90:556–562
Chen HI, Chang HY (2004) Homogeneous precipitation of cerium dioxide nanoparticles in alcohol/water mixed solvents. Colloids & Surfaces A Physicochemical & Engineering Aspects 242:61–69
Xiang X, Li X, Li W (2013) Preparation and characterization of size-uniform Li[Li0.131Ni0.304Mn0.565]O2 particles as cathode materials for high energy lithium ion battery. J Power Sources 230:89–95
Huang Z, Liu L, Zhou Q, Tan J, Yan Z, Xia D, Shu H, Yang X, Wang X (2015) Carbon-coated lithium titanium phosphate nanoporous microplates with superior electrochemical performance. J Power Sources 294:650–657
Barker J, West K, Saidi Y, Pynenburg R, Zachau-Christiansen B, Koksbang R (1995) Kinetics and thermodynamics of the lithium insertion reaction in spinel phase LixMn2O4. J Power Sources 54:475–478
Bao SJ, Li CM, Li HL, Luong JHT (2007) Morphology and electrochemistry of LiMn2O4 optimized by using different Mn-sources. J Power Sources 164:885–889
Chemelewski K, Shin D, Li W, Manthiram A (2013) Octahedral and truncated high-voltage spinel cathodes: the role of morphology and surface planes in electrochemical properties. J Mater Chem A 1:3347–3354
Chemelewski KR, Lee ES, Li W, Manthiram A (2013) Factors influencing the electrochemical properties of high-voltage spinel cathodes: relative impact of morphology and cation ordering. Chem Mater 25:2890–2897
Liu H, Wang J, Zhang X, Zhou D, Qi X, Qiu B, Fang J, Kloepsch R, Schumacher G, Liu Z, Li J (2016) Morphological evolution of high-voltage spinel LiNi0.5Mn1.5O4 cathode materials for lithium-ion batteries: the critical effects of surface orientations and particle size. ACS Appl Mater Interfaces 8:4661–4675
Kim JS, Kim K, Cho W, Shin WH, Kanno R, Choi JW (2012) A truncated manganese spinel cathode for excellent power and lifetime in lithium-ion batteries. Nano Lett 12:6358–6365
Hirayama M, Ido H, Kim K, Cho W, Tamura K, Mizuki J et al (2010) Dynamic structural changes at LiMn2O4/electrolyte interface during lithium battery reaction. J Am Chem Soc 132:15268–15276
Idemoto Y, Narai H, Koura N (2003) Crystal structure and cathode performance dependence on oxygen content of LiNi0.5Mn1.5O4 as a cathode material for secondary lithium batteries. J Power Sources 119–121:125–129
Liu H, Zhu G, Li Z, Qu Q, Shen M, Zheng H (2015) Controllable synthesis of spinel lithium nickel manganese oxide cathode material with enhanced electrochemical performances through a modified oxalate co-precipitation method. J Power Sources 274:1180–1187
Jin YC, Lin CY, Duh JG (2012) Improving rate capability of high potential LiNi0.5Mn1.5O4-x cathode materials via increasing oxygen non-stoichiometries. Electrochim Acta 69:45–50
Funding
This work is supported by the Natural Science Foundation of China (Nos. 21566021 and 21766017), the Transformation of Scientific and Technological Achievements of Gansu Institutions of Higher Education (No. 2017D-04), and the Supporting Plan for Youth Innovative Talents of Longyuan.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, S., Xie, J., Zhao, D. et al. Morphological evolution of spinel disordered LiNi0.5Mn1.5O4 cathode materials for lithium-ion batteries by modified solid-state method. Ionics 25, 1999–2006 (2019). https://doi.org/10.1007/s11581-018-2637-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11581-018-2637-9