Abstract
The drying of food products is an essential step in the preservation of crops and agricultural by-products that serve as raw materials for numerous end applications. Solar drying with phase change materials (PCMs) is an efficient low-energy consumption process in the post-reaping stage, reducing food deterioration. A customized solar dryer setup was assembled using Cudappah (black) stones as the base of the drying chamber to facilitate the absorption of solar energy on its surface. The organic paraffin wax, with a melting point of 60 ℃, was used as PCM in the solar dryer. The novelty of the study is the application of a PCM in a solar dryer to improve the effectiveness of drying and decrease the absolute drying period and the microbial content in the dried coconut. The study compared the drying characteristics between open sun drying and solar drying without and with PCM (100 and 200 g). The fabricated setup was utilised for drying coconut using a PCM-based solar drying method. The coconut was dried from an initial moisture content of 55.5% to a final moisture content of about 9%. The prototype dryer model minimized the use of the workforce, avoided improper drying, and decreased the absolute drying time. A total plate count (TPC) test was conducted to characterize the microbial content in the dried coconut. The microbial count decreased with the use of 200-g PCM as the use of PCM retained the heat for a longer time in the chamber. The drying time of coconut decreased by about 28 and 52 h on using 100 and 200 g of PCM, respectively, compared to open sun drying. The sensory characteristics like colour, taste, flavour, quality, and texture of the solar-dried coconut sample were superior to the sun-dried coconut sample.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Data availability
All data are given in the manuscript.
Abbreviations
- PCM:
-
Phase change material
- TPC:
-
Total plate count
- TES:
-
Thermal energy storage
- Mi :
-
Mass of the product before drying
- Md :
-
Mass of the dried product
References
Akhijahani HS, Arabhosseini A, Kianmehr MH (2017) Comparative quality assessment of different drying procedures for plum fruits (Prunus domestica L.). Czech J Food Sci 35(5), 449–455, https://doi.org/10.17221/440/2016-CJFS.
Alimohammadi Z, Akhijahani HS, Salami P (2020) Thermal analysis of a solar dryer equipped with PTSC and PCM using experimental and numerical methods. Sol Energy 201:157–177. https://doi.org/10.1016/j.solener.2020.02.079
Ananno AA, Masud MH, Dabnichki P, Ahmed A (2020) Design and numerical analysis of a hybrid geothermal PCM flat plate solar collector dryer for developing countries. Sol Energy 196:270–286. https://doi.org/10.1016/j.solener.2019.11.069
Arfaoui, Nessim, SalwaBouadila, and AmenallahGuizani. “A highly efficient solution of off-sunshine solar air heating using two packed beds of latent storage energy.” Solar Energy 155 (2017): 1243–1253. https://doi.org/10.1016/j.solener.2017.07.075.
Atalay H (2020) Assessment of energy and cost analysis of packed bed and phase change material thermal energy storage systems for the solar energy-assisted drying process. Sol Energy 198:124–138. https://doi.org/10.1016/j.solener.2020.01.051
Aussanasuwannakul A, Puntaburt K, & Treesuwan W (2020). Rheological, tribological, and sensory analysis of coconut-oil-modified coconut milk Kefir. Current Research in Nutrition and Food Science Journal, 8(2), 496–503.https://doi.org/10.12944/CRNFSJ.8.2.15
Ayyappan S (2018). Performance and CO2 mitigation analysis of a solar greenhouse dryer for coconut drying. Energy & Environment, 29(8), 1482–1494, https://doi.org/10.1177/2F0958305X18781891.
Ayyappan S, Selvakumar M, Muthukannan K, Ram Kumar T (2021) Energy and exergy analyses of coconut drying in a solar tunnel drier Proceedings of the Institution of Mechanical Engineers, Part e: J Process Mech Eng 09544089211005312 https://doi.org/10.1177/09544089211005312
Azaizia Z, Kooli S, Hamdi I, Elkhal W, Guizani AA (2020) Experimental study of a new mixed mode solar greenhouse drying system with and without thermal energy storage for pepper. Renewable Energy 145:1972–1984. https://doi.org/10.1016/j.renene.2019.07.055
Bahari M, Najafi B, Babapoor A (2020) Evaluation of α-AL2O3-PW nanocomposites for thermal energy storage in the agro-products solar dryer. J Energy Storage 28:101181. https://doi.org/10.1016/j.est.2019.101181
Baniasadi E, Ranjbar S, Boostanipour O (2017) Experimental investigation of the performance of a mixed-mode solar dryer with thermal energy storage. Renew Energy 112:143–150. https://doi.org/10.1016/j.renene.2017.05.043
Bhardwaj AK, Kumar R, Chauhan R (2019) Experimental investigation of the performance of a novel solar dryer for drying medicinal plants in Western Himalayan region. Sol Energy 177:395–407. https://doi.org/10.1016/j.solener.2018.11.007
Devi TB, Kalnar YB (2021) Design consideration of smart solar dryer for precision drying: smart solar dryer for precision drying. J AgriSearch 8(2):135–138. https://doi.org/10.21921/jas.v8i2.7297
El Khadraoui A, Bouadila S, Kooli S, Farhat A, Guizani A (2017) Thermal behavior of indirect solar dryer: nocturnal usage of solar air collector with PCM. J Clean Prod 148:37–48. https://doi.org/10.1016/j.jclepro.2017.01.149
Fudholi A, Sopian K (2019) A review of solar air flat plate collector for drying application. Renew Sustain Energy Rev 102:333–345. https://doi.org/10.1016/j.rser.2018.12.032
Haldorai S, Gurusamy S, Pradhapraj M (2019) A review on thermal energy storage systems in solar air heaters. Int J Energy Res 43(12):6061–6077. https://doi.org/10.1002/er.4379
Jariyawaranugoon U (2018). Evaluation of pre-treatment on osmo-dried coconut properties and its impact on quinoa dessert. Food Res, 2(3), 287–293, https://doi.org/10.26656/fr.2017.2(3).025.
Komolafe CA, &Waheed MA (2018). Design and fabrication of a forced convection solar dryer integrated with heat storage materials. In ACSM (Vol. 42, pp. 23–39). https://eprints.lmu.edu.ng/id/eprint/2734.
Kumar R, Arul B, Ganesh Babu and M Mohanraj (2017) “Experimental investigations on a forced convection solar air heater using packed bed absorber plates with phase change materials.” Int J Green Energy 14, no. 15: 1238–1255, https://doi.org/10.1080/15435075.2017.1330753.
Le TS, Le TH, Pham MT (2021) A review of the indirect solar dryer with sensible heat storage mediums. J Mech Eng Res Dev 44(7):131–140
Lingayat AB, Chandramohan VP, Raju VRK, Meda V (2020) A review on indirect type solar dryers for agricultural crops–dryer setup, its performance, energy storage and important highlights. Appl Energy 258:114005. https://doi.org/10.1016/j.apenergy.2019.114005
Maithani R, Kumar A, Zadeh PG, Safaei MR, Gholamalizadeh E (2020) Empirical correlations development for heat transfer and friction factor of a solar rectangular air passage with spherical-shaped turbulence promoters. J Therm Anal Calorim 139(2):1195–1212. https://doi.org/10.1007/s10973-019-08551-8
Mall P, Singh D (2018) Comparative study of performance of indirect mode with PCM and mixed mode solar dryer for coriander leaves. Int J Appl Eng Res 13(8):5909–5919
Mandal S, Sharma PK, Mani I, Kushwaha HL, TV AK, & Sarkar SK (2020, December). Design and development of phase change material (PCM) based hybrid solar dryer for herbs and spices. ICAR, http://epubs.icar.org.in/ejournal/index.php/IJAgS/article/view/108599.
Mohana Y, Mohanapriya R, Anukiruthika T, Yoha KS, Moses JA, Anandharamakrishnan C (2020) Solar dryers for food applications: concepts, designs, and recent advances. Sol Energy 208:321–344. https://doi.org/10.1016/j.solener.2020.07.098
Padmanaban G, Ponnusamy PK, Murugesan M (2017) Performance of a desiccant assisted packed bed passive solar dryer for copra processing. Therm Sci 21(suppl. 2):419–426. https://doi.org/10.2298/TSCI17S2419P
Saleel CA (2021) A review on the use of coconut oil as an organic phase change material with its melting process, heat transfer, and energy storage characteristics. J Therm Anal Calorim 1–22. https://doi.org/10.1007/s10973-021-10839-7
Shalaby SM, Bek MA, El-Sebaii AA (2014) Solar dryers with PCM as energy storage medium: a review. Renew Sustain Energy Rev 33:110–116. https://doi.org/10.1016/j.rser.2014.01.073
Sharma M, Atheaya D, & Kumar A (2021). Recent advancements of PCM based indirect type solar drying systems: a state of art. Mater Today: Proc, https://doi.org/10.1016/j.matpr.2021.04.280.
Singh D, Mall P (2020) Experimental investigation of thermal performance of indirect mode solar dryer with phase change material for banana slices Energy Source Part A 1–18. https://doi.org/10.1080/15567036.2020.1810825
Simo-Tagne M, Ndi-Azese M (2021) Thermal, economic, and environmental analysis of a novel solar dryer for firewood in various temperate and tropical climates. Sol Energy 226:348–364. https://doi.org/10.1016/j.solener.2021.08.060
Srinivasan G, Rabha DK, Muthukumar P (2021) A review on solar dryers integrated with thermal energy storage units for drying agricultural and food products Sol Energy https://doi.org/10.1016/j.solener.2021.07.075
Subbian V, Murugavel KK, Raja RS, Shanawaz AM (2021) Experimental investigation and the performance evaluation of a mixed mode solar dryer for coconut. Material Today Proc 45:3662–3665. https://doi.org/10.1016/j.matpr.2021.01.157
Sudhakar P (2021, April). A review on performance enhancement of solar drying systems. In IOP Conference Series: Materials Science and Engineering (Vol. 1130, No. 1, p. 012042). IOP Publishing doi:https://doi.org/10.1088/1757-899X/1130/1/012042.
Sumarni NK (2021). Inhibitory power of young coconut fiber ethanol extract (Cocos nucifera Linn) on the growth of Bacteria staphylococcus aureus and Escherichia coli in tofu. In J Phys: Conf Ser (Vol. 1763, No. 1, p. 012010). IOP Publishing, https://doi.org/10.1088/1742-6596/1763/1/012010.
Swami VM, Autee AT, Anil TR (2018) Experimental analysis of solar fish dryer using phase change material. Journal of Energy Storage 20:310–315. https://doi.org/10.1016/j.est.2018.09.016
Vásquez J, Reyes A, Pailahueque N (2019) Modeling, simulation and experimental validation of a solar dryer for agro-products with thermal energy storage system. Renew Energy 139:1375–1390. https://doi.org/10.1016/j.renene.2019.02.085
Vijayrakesh K, Muthuvel S, Gopinath GR, Qarnain SS, Bathrinath S (2021) Experimental investigation of the performance of paraffin wax-packed floor on a solar dryer. J Energy Storage 43, 103163. https://doi.org/10.1016/j.est.2021.103163
Acknowledgements
The authors would like to thank the principal and management of Kalasalingam Academy of Research and Education for their assistance in completing this research project.
Author information
Authors and Affiliations
Contributions
Gopinath Radhakrishnan Govindan: investigation, project administration, writing original draft.
Muthuvel Sattanathan: review and editing.
Muthukannan Muthiah: review and editing.
Sudhakarapandian Ranjitharamasamy: review and editing.
Muthu Manokar Athikesavan: review and editing.
Corresponding author
Ethics declarations
Ethics approval and consent to participate
Not applicable.
Consent for publication
Not applicable.
Conflict of interest
The authors declare no competing interests.
Additional information
Responsible Editor: Philippe Garrigues
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Radhakrishnan Govindan, G., Sattanathan, M., Muthiah, M. et al. Performance analysis of a novel thermal energy storage integrated solar dryer for drying of coconuts. Environ Sci Pollut Res 29, 35230–35240 (2022). https://doi.org/10.1007/s11356-021-18052-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-021-18052-7