Abstract
Background, aims, and scope
Heavy metal contaminants in environment, especially in drinking water, are always of great concern due to their health impact. Due to the use of heavy metals as catalysts during plastic syntheses, particularly antimony, human exposure to metal release from plastic bottles has been a serious concern in recent years. The aim and scope of this study were to assess metal contaminations leaching out from a series of recycling plastic bottles upon treatments.
Methodology
In this study, leaching concentrations of 16 metal elements were determined in 21 different types of plastic bottles from five commercial brands, which were made of recycling materials ranging from no. 1 to no. 7. Several sets of experiments were conducted to study the factors that could potentially affect the metal elements leaching from plastic bottles, which include cooling with frozen water, heating with boiling water, microwave, incubating with low-pH water, outdoor sunlight irradiation, and in-car storage.
Results
Heating and microwave can lead to a noticeable increase of antimony leaching relative to the controls in bottle samples A to G, and some even reached to a higher level than the maximum contamination level (MCL) of the US Environmental Protection Agency (USEPA) regulations. Incubation with low-pH water, outdoor sunlight irradiation, and in-car storage had no significant effect on antimony leaching relative to controls in bottle samples A to G, and the levels of antimony leaching detected were below 6 ppb which is the MCL of USEPA regulations. Cooling had almost no effect on antimony leaching based on our results. For the other interested 15 metal elements (Al, V, Cr, Mn, Co, Ni, Cu, As, Se, Mo, Ag, Cd, Ba, Tl, Pb), no significant leaching was detected or the level was far below the MCL of USEPA regulations in all bottle samples in this study. In addition, washing procedure did contribute to the antimony leaching concentration for polyethylene terephthalate (PET) bottles. The difference of antimony leaching concentration between washing procedure involved and no washing procedure involved (AC) was larger than zero for samples A to G. This interesting result showed that higher antimony concentration was detected in experiments with no washing procedures compared with those experiments with washing procedures. Our study results indicate that partial antimony leaching from PET bottles comes from contaminations on the surface of plastic during manufacturing process, while major antimony leaching comes from conditional changes.
Conclusion
The results revealed that heating and microwaving enhance antimony leaching significantly in PET plastic bottles. Plastic bottle manufacturers should consider the contaminations during manufacturing process and washing bottles before first use was strongly recommended to remove those contaminants.
Similar content being viewed by others
References
Ahmad M, Bajahlan AS (2007) Leaching of styrene and other aromatic compounds in drinking water from PS bottles. J Environ Sci 19:421–426
Cao XL (2008) Determination of phthalates and adipate in bottled water by headspace solid-phase microextraction and gas chromatography/mass spectrometry. J Chromatogr, A 1178:231–238
Creed JT, Brockhoff CA, Martin TD (1994) Determination of trace elements in waters and wastes by inductively coupled plasma-Mass spectrometry. US EPA Method 200.8
Fertmann R, Hentschel S, Dengler D, Janssen U, Lommel A (2004) Lead exposure by drinking water: an epidemiological study in Hamburg, Germany. Int J Hyg Environ Health 207:235–244
Kale G, Auras R, Singh SP, Narayan R (2007) Biodegradability of polylactide bottles in real and simulated composting conditions. Polym Test 26:1049–1061
Kang J-H, Kondo F, Katayama Y (2006) Human exposure to bisphenol A. Toxicology 226:79–89
Karamanis D, Stamoulis K, Ioannides KG (2007) Natural radionuclides and heavy metals in bottled water in Greece. Desalination 213:90–97
Karamanis D, Ioannides K, Stamoulis K (2009) Environmental assessment of natural radionuclides and heavy metals in waters discharged from a lignite-fired power plant. Fuel 88:2046–2052
Kontominas MG, Goulas AE, Badeka AV, Nerantzaki A (2006) Migration and sensory properties of plastics-based nets used as food-contacting materials under ambient and high temperature heating conditions. Food Addit Contam 23:634–641
Loyo-Rosales JE, Rosales-Rivera GC, Lynch AM, Rice CP, Torrents A (2004) Migration of nonylphenol from plastic containers to water and a milk surrogate. J Agric Food Chem 52:2016–2020
Mahajan R, Walia T, Lark B, Sumanjit (2006) Analysis of physical and chemical parameters of bottled drinking water. Int J Environ Health Res 16(F Sumanjit):89–98
Momani KA (2006) Chemical assessment of bottled drinking waters by IC, GC, and ICP–MS. Instrum Sci Technol 34:587–605
Saeedi M, Hosseinzadeh M, Jamshidi A, Pajooheshfar SP (2009) Assessment of heavy metals contamination and leaching characteristics in highway side soils, Iran. Environ Monit Assess 151:231–241
Sajiki J, Yonekubo J (2004) Leaching of bisphenol A (BPA) from polycarbonate plastic to water containing amino acids and its degradation by radical oxygen species. Chemosphere 55:861–867
Shotyk W, Krachler M (2007a) Contamination of bottled waters with antimony leaching from polyethylene terephthalate (PET) increases upon storage. Environ Sci Technol 41:1560–1563
Shotyk W, Krachler M (2007b) Lead in bottled waters: contamination from glass and comparison with pristine groundwater. Environ Sci Technol 41:3508–3513
Shotyk W, Krachler M, Chen B (2006) Contamination of Canadian and European bottled waters with antimony from PET containers. J Environ Monit 8:288–292
Suzuki J, Katsuki Y, Ogawa H, Suzuki K, Matsumoto H, Yasuda K (2000) Concentration of trace elements in bottled drinking water. Shokuhin Eiseigaku Zasshi 41:387–396
Westerhoff P, Prapaipong P, Shock E, Hillaireau A (2008) Antimony leaching from polyethylene terephthalate (PET) plastic used for bottled drinking water. Water Res 42:551–556
Acknowledgements
This research work was supported by Environmental Research Center and Chemistry Department at Missouri University of Science and Technology.
Author information
Authors and Affiliations
Corresponding author
Additional information
Responsible editor: Elena Maestri
Electronic supplementary materials
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Cheng, X., Shi, H., Adams, C.D. et al. Assessment of metal contaminations leaching out from recycling plastic bottles upon treatments. Environ Sci Pollut Res 17, 1323–1330 (2010). https://doi.org/10.1007/s11356-010-0312-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-010-0312-4