Abstract
The simultaneous and accurate identification of multiple thermo-mechanical parameters of superalloy materials in complicated service condition is an important and difficult problem. In this paper, an integrated digital image correlation (I-DIC) method was developed to address this issue. For the first time, thermo-mechanical deformation was inversed and decoupled by using I-DIC combined with an inhomogeneous high-temperature thermo-mechanical loading and optical band-pass filter imaging system. Results show that the proposed method has advantages such as high independence, short computing times, easy operation, and a small probability of error accumulation. Therefore, I-DIC is an effective and promising tool for multi-parameter inversion and thermo-mechanical deformation decoupling in practical engineering conditions.
Similar content being viewed by others
References
Fang X, Jia J, Feng X (2015) Three-point bending test at extremely high temperature enhanced by real-time observation and measurement. Measurement 59:171–176
Fang X, Yu H, Zhang G, et al. (2014) In situ observation and measurement of composites subjected to extremely high temperature. The Review of Scientific Instruments 85:035104
Pan B, Yu L, Wu D (2015) Thermo-mechanical response of superalloy honeycomb sandwich panels subjected to non-steady thermal loading. Mater Des 88:528–536
Su H, Fang X, Qu Z, Zhang C, Yan B, Feng X (2015) Synchronous full-field measurement of temperature and deformation of C/SiC composite subjected to flame heating at high temperature. Exp Mech 71:1–13
Pan B, Qian K, Xie H, et al. (2009) Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Meas Sci Technol 20:062001
Sutton MA, Hild F (2015) Recent advances and perspectives in digital image correlation. Exp Mech 55:1–8
Meadows D, Johnson W, Allen J (1970) Generation of surface contours by moiré patterns. Appl Opt 9:942–947
Post D, Han B, Ifju P (1994) High sensitivity moiré: experimental analysis for mechanics and materials. Exp Tech 18(2):100–104
Hackbusch W (1985) Multi-grid methods and applications. Springer-Verlag, Berlin
Dainty JC (1975) Laser speckle and related phenomena. In: Berlin and New York, Springer-Verlag (Topics in Applied Physics. Volume 9), 1975. 298 p
Avril S, Bonnet M, Bretelle A-S, et al. (2008) Overview of identification methods of mechanical parameters based on full-field measurements. Exp Mech 48:381–402
Lecompte D, Sol H, Vantomme J et al. (2005) Identification of elastic orthotropic material parameters based on ESPI measurements. In: SEM annual conference and exposition on experimental and applied mechanics
Mathieu F, Leclerc H, Hild F, et al. (2015) Estimation of elastoplastic parameters via weighted FEMU and integrated-DIC. Exp Mech 55:105–119
Florentin E, Lubineau G (2010) Identification of the parameters of an elastic material model using the constitutive equation gap method. Comput Mech 46:521–531
Grédiac M, Toussaint E, Pierron F (2002) Special virtual fields for the direct determination of material parameters with the virtual fields method. 1––principle and definition. Int J Solids Struct 39:2691–2705
Pierron F (2012) The virtual fields method. Extracting constitutive mechanical parameters from fullfield deformation measurements. Springer-Verlag, New York
Nigamaa N, Subramanian SJ (2014) Identification of orthotropic elastic constants using the eigenfunction virtual fields method. Int J Solids Struct 51:295–304
Subramanian SJ (2014) The eigenfunction virtual fields method. In: Jin H, Sciammarella C, Yoshida S, Lamberti L (eds) Advancement of optical methods in experimental mechanics, vol 3, Conference Proceedings of the Society for Experimental Mechanics Series. Springer International Publishing, Cham, p 35–42. doi:10.1007/978-3-319-00768-7_6
Hild F, Roux S (2006) Digital image correlation: from displacement measurement to identification of elastic properties–a review. Strain 42:69–80
Baldi A (2013) Residual stress measurement using hole drilling and integrated digital image correlation techniques. Exp Mech 54:379–391
Gao J, Shang H (2009) Deformation-pattern-based digital image correlation method and its application to residual stress measurement. Appl Opt 48:1371–1381
Baldi A (2014) Residual stress analysis of orthotropic materials using integrated digital image correlation. Exp Mech 54:1279–1292
Liu Z, Gao J (2011) Deformation-pattern-based digital speckle correlation for coefficient of thermal expansion evaluation of film. Opt Express 19:17469–17479
Ma Y, Yao X, Liu X, et al. (2013) Inversion and decoupling of thermo-mechanical deformation in anisotropic materials using the virtual fields method. Proceedings of the Royal Society a: mathematical. Phys Eng Sci 469:20130124–20130124
Bonnet M, Constantinescu A (2005) Inverse problems in elasticity. Inverse Problems 21:R1
Timoshenko SP, Goodier JN, Abramson HN (1970) Theory of elasticity (3rd ed.). J Appl Mech 37(3):888
Lucas BD, Kanade T (1981) An iterative image registration technique with an application to stereo vision. Paper presented at the Proceedings of the 7th international joint conference on Artificial intelligence - vol 2, Vancouver, BC, Canada. Morgan Kaufmann Publishers Inc, p 674–679
Pan B, Lu Z, Xie H (2010) Mean intensity gradient: an effective global parameter for quality assessment of the speckle patterns used in digital image correlation. Opt Lasers Eng 48:469–477
Risken H (1989) The Fokker-Planck equation. Appl Opt 28(20):4496–4497
Galindo A, Pascual P (1990) Quantum mechanics I. Texts & Monographs in Physics 200(4913):1252
Committee CaMHR (2002) China aeronautical materials handbook. Standards Press of China
Haddadi H, Belhabib S (2008) Use of rigid-body motion for the investigation and estimation of the measurement errors related to digital image correlation technique. Opt Lasers Eng 46:185–196
Pan B, Wu D, Xia Y (2010) High-temperature deformation field measurement by combining transient aerodynamic heating simulation system and reliability-guided digital image correlation. Opt Lasers Eng 48:841–848
Bing P, Hui-Min X, Bo-Qin X et al. (2006) Performance of sub-pixel registration algorithms in digital image correlation. Meas Sci Technol 17:1615
Acknowledgments
This work was financially supported by the National Natural Science Foundation of China (11232008, 11372037, and 11572041) and the Program for New Century Excellent Talents in University (NCET-12-0036).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dong, J., Liu, Z. & Gao, J. Multi-Parameter Inversion and Thermo-Mechanical Deformation Decoupling using I-DIC. Exp Mech 57, 31–39 (2017). https://doi.org/10.1007/s11340-016-0203-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11340-016-0203-9