Abstract
The power window control is the mechanism to automatically control the upward and downward movement of power window in vehicles by application of position, current, flexi force and temperature sensor as replacement of conventional or mechanical controlled hand crank based system. The paper focuses on model based development and testing of miniaturized scale controller for automotive smart power window, hardware-in-the-loop (HIL) testing using dSPACE simulator. The experimental work is carried out for the same to provide the desired precision due to the testing limitation in real time vehicle. The HIL set up is utilized to analyze the different manual and sensory inputs functionalities in Indian driving environment. The paper presented the DC motor interfacing to the controller as the main building block of the power window system. The motor takes the decision based on the decision tree classifier (DTC) machine learning algorithm and control movements in desired direction by condition inputs from decision tree. The system behavior is completely based on the algorithm, dSPACE testing environment supports the window functionality and its movement control in upward, downward direction and the results showed that the developed system is effective in identifying obstacle. The decision tree test set and training set data depicts that 93%-sampled results are valid outcome and 7% are invalid under 12 different test observations.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.References
Kumar, R., Ahuja, N. J., Saxena, M., & Kumar, A. (2016). Modelling and simulation of object detection in automotive power window. Indian Journal of Science and Technology, 9, 43.
Park, J. H., Choi, G. H., Yoon, T. S., & Park, J. B. (2008). A sensorless safety power window control system in automotive application. 2008 International conference on control, automation and systems 2008, October 14 (pp. 1457–1461). Boston: IEEE.
Liu, X. M., Shao, Y. H., Wu, H. W., & Zhong, Y. H. (2007). Design of car window antitrapping without sensor. Micromotors Servo Technique, 2007(4), 48–49.
Tiwari, T., Shah, A., & Nainwad, C. S. (2002). Design and development of high power window for linear accelerator at 2.856 GHz. In Third IEEE international vacuum electronics conference (IEEE Cat. No. 02EX524) 2002 (pp. 377–378). IEEE.
Yi, W., Yunfeng, Q., & Jie, Y. (2011). Application of automobile power window controller for peripheral interface controller. In IEEE 2011 10th International conference on electronic measurement & instruments 2011, August 16 (Vol. 2, pp. 364–367). IEEE.
Dahri, F. A., Mangrio, H. B., Baqai, A., & Umrani, F. A. (2019). Experimental evaluation of intelligent transport system with VLC vehicle-to-vehicle communication. Wireless Personal Communications, 106(4), 1885–1896.
Li, J., Yu, F., Zhang, J. W., Feng, J. Z., & Zhao, H. P. (2002). The rapid development of a vehicle electronic control system and its application to an antilock braking system based on hardware-in-the-loop simulation. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216(2), 95–105.
Bertsekas, D. P., Bertsekas, D. P., Bertsekas, D. P., & Bertsekas, D. P. (1995). Dynamic programming and optimal control. Belmont, MA: Athena Scientific.
Zaccarian, L. (2012). DC motors: Dynamic model and control techniques. Lecture notes. Rome: Tor Vergata University of Rome.
Kumar, R. (2018). Mathematical modeling and modern control based validation of automotive smart power window. Doctoral Dissertation, University of Petroleum and Energy Studies, Dehradun, India.
Lee, S., & Kim, D. (2016). An energy efficient vehicle to pedestrian communication method for safety applications. Wireless Personal Communications, 86(4), 1845–1856.
Christofides, N., Mingozzi, A., & Toth, P. (1981). Exact algorithms for the vehicle routing problem, based on spanning tree and shortest path relaxations. Mathematical Programming, 20(1), 255–282.
Prawoto, Y., & Yusof, M. A. (2013). Automotive power window mechanism failure initiated by overload. Engineering Failure Analysis, 31, 179–188.
Tenconi, A., & Wheeler, P. W. (2012). Introduction to the special section on the more electric aircraft: Power electronics, machines, and drives. IEEE Transactions on Industrial Electronics, 59(9), 3521–3522.
Schliecker, S., Rox, J., Negrean, M., Richter, K., Jersak, M., & Ernst, R. (2009). System level performance analysis for real-time automotive multicore and network architectures. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 28(7), 979–992.
Han, D., Liu, Y., & Lin, F. (2017). Modeling the channel time variation inside moving vehicle. Wireless Personal Communications, 94(3), 889–897.
Paier, A., Karedal, J., Czink, N., Dumard, C., Zemen, T., Tufvesson, F., ... Mecklenbräuker, C. F. (2009). Characterization of vehicle-to-vehicle radio channels from measurements at 5.2 GHz. Wireless Personal Communications, 50(1), 19–32.
Schlatow, J., Möstl, M., Ernst, R., Nolte, M., Jatzkowski, I., & Maurer, M. (2017). Towards model-based integration of component-based automotive software systems. In IECON 2017–43rd annual conference of the IEEE industrial electronics society 2017, October 29 (pp. 8425–8432). IEEE.
Sahlbach, H., Whitty, S., & Ernst, R. (2012). A flexible high-performance accelerator platform for automotive sensor applications. SAE International Journal of Passenger Cars-Electronic and Electrical Systems, 5, 280–291.
Karris, S. T. (2006). Introduction to Simulink with engineering applications. Fremont, CA: Orchard Publications.
Ruan, J., Walker, P., & Zhu, B. (2014). Experimental verification of regenerative braking energy recovery system based on electric vehicle equipped with 2-speed DCT. In 7th IET international conference on power electronics, machines and drives (PEMD 2014).
Kumar, R., Ahuja, N. J., & Saxena, M. (2018). Improvement and approval of impediment recognition and activity for power window. In Intelligent communication, control and devices (pp. 855–864). Singapore: Springer.
Dimeas, I., Petras, I., & Psychalinos, C. (2017). New analog implementation technique for fractional-order controller: A DC motor control. AEU-International Journal of Electronics and Communications, 78, 192–200.
Park, M. H., & Joo, Y. I. (2017). Adaptive beaconing for effective inter-vehicle collision avoidance system. Wireless Personal Communications, 96(2), 1741–1751.
Song, Z., Guangqiang, W., & Songlin, Z. (2010, June). Study on the energy management strategy of DCT-based series-parallel PHEV. In 2010 International conference on computing, control and industrial engineering (Vol. 1, pp. 25–29). IEEE.
Kumar, R., Dwivedi, P. K., Reddy, D. P., & Das, A. S. (2014, December). Design and implementation of hydraulic motor based elevator system. In 2014 IEEE 6th India international conference on power electronics (IICPE) (pp. 1–6). IEEE.
Chaple, M., Bodkhe, S. B., & Daigavane, P. (2019). Four phase (8/6) SRM with DTC for minimization of torque ripple. The International Journal of Electrical Engineering & Education. https://doi.org/10.1177/0020720919841686.
Ehsani, M., Rahman, K. M., & Toliyat, H. A. (1997). Propulsion system design of electric and hybrid vehicles. IEEE Transactions on Industrial Electronics, 44(1), 19–27.
Roggia, S., Cupertino, F., Gerada, C., & Galea, M. (2017). A two-degrees-of-freedom system for wheel traction applications. IEEE Transactions on Industrial Electronics, 65(6), 4483–4491.
Kumar, R., & Kumar, A. (2013). Design and hardware development of power window control mechanism using microcontroller. In 2013 international conference on signal processing and communication (ICSC) 2013, December 12 (pp. 361–365). New Delhi: IEEE.
Kumar, A., Sharma, P., Gupta, M. K., & Kumar, R. (2018). Machine learning based resource utilization and pre-estimation for network on chip (NoC) communication. Wireless Personal Communications, 102(3), 2211–2231.
Meera, C. S., Sunny, S., Singh, R., Sairam, P. S., Kumar, R., & Emannuel, J. (2014, December). Automated precise liquid transferring system. In 2014 IEEE 6th India international conference on power electronics (IICPE) (pp. 1–6). IEEE.
Author information
Authors and Affiliations
Corresponding author
Additional information
The submitted manuscript the extension of my Ph.D. work under the same supervisors. The current author of this article and my Ph.D supervisor are the same.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kumar, R., Ahuja, N.J., Saxena, M. et al. Automotive Power Window Communication with DTC Algorithm and Hardware-in-the Loop Testing. Wireless Pers Commun 114, 3351–3366 (2020). https://doi.org/10.1007/s11277-020-07535-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11277-020-07535-4