The calculation model of the impact indenting electrode interaction with an AMg6 aluminum alloy plate on the electrodynamic treatment of weld joints is described. The problem was solved in the Lagrange two-dimensional statement with an ANSYS/LS-DYNA program. Calculation results for residual stress and plastic strain regions formed on the elastoplastic indenting electrode impact are presented.
Similar content being viewed by others
References
K. Masubuchi, Analysis of Welded Structures: Residual Stresses, Distortion, and Their Consequences, Pergamon Press, Oxford–New York (1980).
G. K. Lashchenko and Yu. V. Demchenko, Energy-Saving Technologies of the Postweld Treatment of Metal Structures [in Russian], Ékotekhnologiya, Kiev (2008).
L. M. Lobanov, N. A. Pashchin, O. L. Mikhodui, and J. A. Khokhlova, “Investigation of residual stress in welded joints of heat-resistant magnesium alloy ML10 after electrodynamic treatment,” J. Magnes. Alloys, 4, No. 2, 77–82 (2016).
L. M. Lobanov, N. A. Pashchin, and O. L. Mikhodui, “Repair of the AMg6 aluminum alloy welded structure by the electric processing method,” Weld Res. Appl., No. 1, 55–62 (2014).
L. M. Lobanov, N. A. Pashchin, A. N. Timoshenko, et al., “Effect of the electrodynamic treatment on the life of AMg6 aluminum alloy weld joints,” Strength Mater., 49, No. 2, 234–238 (2017).
Yu. M. Sidorenko and P. S. Shlenskii, “On the assessment of stress-strain state of the load-bearing structural elements in the tubular explosion chamber,” Strength Mater., 45, No. 2, 210–220 (2013).
A. Yu. Muizemnek and A. A. Bogach, Mathematical Simulation of Impact and Explosion in an LS-DYNA Program. Text Book [in Russian], PGU, Penza (2005).
V. V. Selivanov (Ed.), A. V. Babkin, V. I. Kolpakov, V. N. Okhitin, et al., Numerical Methods in Explosion and Impact Physics Problems [in Russian], Vol. 3, Bauman MGTU, Moscow (2000).
K. M. Rudakov, Numerical Methods of Analysis in the Dynamics and Strength of Constructions [in Ukrainian], NTUU “KPI,” Kyiv (2007).
V. A. Odintsov and Yu. M. Sidorenko, “Simulation of the explosion process of a standard fission cylinder with a different degree of detailing,” Oboron. Tekhn., Nos. 1–2, 17–20 (2001).
L. P. Orlenko (Ed.), S. G. Andreev, Yu. A. Babkin, F. A. Baum, et al., Physics of Explosion [in Russian], Vol. 2, Fizmatlit, Moscow (2004).
Author information
Authors and Affiliations
Additional information
Translated from Problemy Prochnosti, No. 3, pp. 30 – 42, May – June, 2017
Rights and permissions
About this article
Cite this article
Lobanov, L.M., Pashchyn, M.O., Mykhodui, O.L. et al. Effect of the Indenting Electrode Impact on the Stress-Strain State of an AMg6 Alloy on Electrodynamic Treatment. Strength Mater 49, 369–380 (2017). https://doi.org/10.1007/s11223-017-9877-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11223-017-9877-1