Abstract
In this paper we present our research concerning an automatic exchange between standard geometrical descriptions of a simulation environment built with (non-)convex polyhedra and a STEP conforming data format. Furthermore, we discuss the geometric tolerances implementation in STEP in comparision to the standard interval arithmetic approach.
Similar content being viewed by others
References
Anderl, R. and Trippner, D.: STEP: Standard for the Exchange of Product Model Data, Teubner, Stuttgart, 2000.
Dyllong, E. and Luther, W.: An Accurate Computation of the Distance between a Point and a Polyhedron, in: Vol. 80 of GAMM 99 Annual Meeting, Metz France, April 12–16, WILEY-VCH, Berlin, 2000, pp. S771-S772.
Dyllong, E. and Luther, W.: Distance-Calculation between a Point and a NURBS Surface, in: Laurent, P.-J., Sablonniere, P., and Schumaker, L. L. (eds), Curve and Surface Design-Saint Malo, 1999, Vanderbilt University Press, Nashville, 2000, pp. 55–62.
Dyllong, E., Luther, W., and Otten, W.: An Accurate Distance-Calculation Algorithm for Convex Polyhedra, Reliable Computing 3 (5) (1999), pp. 241–254.
Horsken, C.: Methoden zur rechnergestiitzen Toleranzanalyse in Computer Aided Design und Mehrkorpersystemen, PhD thesis, University of Duisburg, VDI (20:374), Diisseldorf, 2003.
Horsken, C. and Traczinski, H.: Modeling of Multibody Systems with Interval Arithmetic, in: Kramer, W. and Wolff von Gudenberg, J. (eds), Scientific Computing, Validated Numerics, Interval Methods-SCAN 2000, 2001, pp. 317–328.
Jaulin, L., Kieffer, M., Didrit, O., and Walter, E.: Applied Interval Analysis with Examples in Parameter and State Estimation, Robust Control and Robotics, Springer, Berlin, 2001.
Kecskemethy, A.: MOBILE Version 1.3 User's Guide, 1999.
Luther, W., Dyllong, E., Fausten, D., Otten, W., and Traczinski, H.: Numerical Verification and Validation of Kinematics and Dynamical Models for Flexible Robots in Complex Environments, in: Kulisch, U., Lohner, R., and Facius, A. (eds), Perspectives on Enclosure Methods, Springer, Wien, 2001, pp. 181–199.
Luther, W. and Traczinski, H.: Error Propagation Control in MOBILE: Extended Basic Mathe matical Objects and Kinetostatic Transmission Elements, in: Kecskemethy, A., Schneider, M., and Woernle, C. (eds), Advances in Multibody Systems andMechatronics, 1999, pp. 267–276.
Morales, D. and Son, T. C.: Interval Methods in Robot Navigation, Reliable Computing 4 (1) (1998), pp. 55–61.
Schenck, D. and Wilson, P.: Information Modeling: The EXPRESS Way, Oxford University Press, New York, 1994.
Strub, M., Hauser, M., and Hendrix, T.: Recommended Practices for Dimensions and Dimensional Tolerances, 2000, http://www.cax-if.org/documents/Rec_Prac_DDT_v2 .pdf.
Tsai, J.-C., Chuang, T.-C., and Guo, D.-N.: Development of a Step-Based Dimensioning and Tolerancing Data Model, Proc. Natl. Set. Counc. ROC(A) 22 (6) (1998), pp. 831–840, http://nr.stic.gov.tw/ejournal/ProceedingA/v22n6/831–840.pdf.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dyllong, E., Luther, W. & Traczinski, H. Modelling Geometric Objects and Tolerances with Intervals: Data Exchange with ISO Standard STEP. Reliable Comput 12, 293–302 (2006). https://doi.org/10.1007/s11155-006-9003-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11155-006-9003-8