Friction units are made of superhard cubic boron nitride-based materials by vacuum brazing and subjected to end-to-end dry friction testing. It is established that the friction factor decreases as the modulus of elasticity of superhard material is decreased and the loading and friction speed are increased.
Similar content being viewed by others
References
V. P. Bondarenko, Tribotechnical Composites with High-Modulus Fillers [in Russian], Naukova Dumka, Kiev (1987), p. 232
N. V. Novikov, et al., Synthesis of Superhard Materials, Vol. 1 of the three-volume series Synthetic Superhard Materials [in Russian], Naukova Dumka, Kiev (1986), p. 280
G. G. Karyuk, Technological Features of Machining by Tools Made of Polycrystalline Superhard Materials [in Russian], Naukova Dumka, Kiev (1991), p. 288.
G. G. Karyuk, L. F. Kolesnichenko, A. I. Yuga, et al., “Frictional properties of materials based on dense modifications of boron nitride,” Powder Metall. Met. Ceram., 23, No. 9, 727–731 (1984).
E. S. Bogorodskii and G. L. Aparnikov, “Research on contact friction between polycrystals of cubic boron nitride, hard alloy, and steel,” Diamonds Superhard Mater., No. 1, 12–14 (1981).
I. M. Fedorchenko and L. I. Pugina, Sintered Antifriction Composite Materials [in Russian], Naukova Dumka, Kiev (1980), p. 404.
Yu. T. Varchenko (ed.), Surface Properties of Melts and Solids and Their Application in Materials Science [in Russian], Naukova Dumka, Kiev (1991), p. 280
A. A. Adamovskii, V. M. Emtsov, and V. T. Varchenko, Technique for research on the tribotechnical properties of superhard materials based on dense boron nitride,” Adhes. Melts Mater. Braz., No. 42, 77–84 (2009).
L. F. Kolesnichenko, V. V. Polotai, L. V. Zabolotnyi, et al., “Technique for the simultaneous friction and wear study of powder metallurgy materials,” Powder Metall. Met. Ceram., 9, No. 3, 224–228 (1970).
F. P. Bouden and D. Teybor, Friction and Lubrication [in Russian], Mashgiz, Moscow (1960), p. 151.
I. V. Kragel’skii, Friction and Wear [in Russian], Mashinostroyeniye, Moscow (1968), p. 480.
V. I. Anuriev, Handbook of Mechanical Engineering Designer [in Russian], Vol. 1, Mashinostroyeniye, Moscow (1979), p. 728.
Author information
Authors and Affiliations
Corresponding author
Additional information
*Deceased (A. V. Bochko).
Translated from Poroshkovaya Metallurgiya, Vol. 54, Nos. 1–2 (490), pp. 91–98, 2015.
Rights and permissions
About this article
Cite this article
Adamovskii, A.A., Bochko, A.V., Kostenko, A.D. et al. Tribotechnical Characteristics of Superhard Boron Nitride-Based Materials During Dry Friction of Like Pairs. Powder Metall Met Ceram 54, 74–79 (2015). https://doi.org/10.1007/s11106-015-9682-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11106-015-9682-y