The paper studies the forward slip that occurs when strips of iron powder and aluminum granules are rolled using drive rolls of different diameters at the same angular velocity. The diameter ratio is from 1.12 to 1.42. It is established that the mismatch between the circumferential velocities of the rolls has a great effect on the forward slip. Forward slip on the large roll is not observed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
G. A. Vinogradov, Yu. N. Semenov, O. A. Katrus, et al., Rolling of Metal Powders [in Russian], Metallurgiya, Moscow (1969), p. 382.
N. N. Pavlov, “Forward slip and pressure on the rolls in vertical rolling of metal powders,” Tr. Leningr. Politekh. Inst., 238, 35–40 (1964).
E. B. Lozhechnikov, Rolling in Powder Metallurgy [in Russian], Metallurgiya, Moscow (1987).
V. P. Severdenko and E. B. Lozhechnikov, Plasticity and Pressing of Metals [in Russian], Nauka i Tekhnika, Minsk (1964), p. 110.
V. N. Vydrin, Dynamics of Rolling Mills [in Russian], Metallurgizdat, Sverdlovsk (1960).
V. G. Sinitsin, Asymmetric Rolling of Sheets and Strips [in Russian], Metallurgiya, Moscow (1984), p. 167.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Poroshkovaya Metallurgiya, Vol. 48, No. 7–8 (468), pp. 18–22, 2009.
Rights and permissions
About this article
Cite this article
Gogaev, K.A., Kalutskii, G.Y. & Voropaev, V.S. Asymmetric rolling of metal powders. III. Forward slip in asymmetric rolling of metal powders. Powder Metall Met Ceram 48, 384–387 (2009). https://doi.org/10.1007/s11106-009-9153-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11106-009-9153-4