Skip to main content
Log in

Quad band metal-dielectric-metal perfect absorber to selective sensing application

  • Published:
Optical and Quantum Electronics Aims and scope Submit manuscript

Abstract

In this article, we have managed to achieve a quad-band perfect classical absorber in the terahertz band. In this proposed structure, which consists of three layers that the top and bottom layers made of gold and a dielectric layer, is located in middle layer. The results show that this structure has four perfect absorption bands with an average absorption of 98.22% at frequencies of 1.36, 2.6, 3.68, and 4.36 THz. To better understand the absorption mechanism, an equivalent circuit related to the proposed structure is presented. We have also shown that the percentage of absorption of the proposed absorber has increased due to the loss of the middle layer. Finally, the distribution of the electric fields is shown at each of the absorption frequencies. Due to its four bands, this absorber has potential in imaging, selective sensing, and photodetector applications.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

Data availability

All data generated or analyzed during this study are included in this published article.

References

  • Aghaee, T., Orougi, A.A.: dual-band terahertz absorber based on graphene periodic arrays of disks and ribbons: circuit model approach. J. Comput. Electron. 20, 611–625 (2021)

    Article  Google Scholar 

  • Alizadeh, S., Zareian-Jahromi, E., Mashayekhi, V.: A tunable graphene-based refractive index sensor for THz bio-sensing applications. Opt. Quant. Electron. 54(2), 1–13 (2022)

    Article  Google Scholar 

  • Aloia, D., et al.: Adaptive broadband radar absorber based on tunable graphene. IEEE Trans. Antennas Propag. 64, 2527–2531 (2016)

    Article  ADS  MathSciNet  MATH  Google Scholar 

  • Arezoomand, A.S., et al.: Independent polarization and multi-band THz absorber base on Jerusalem cross. Opt. Commun. 352, 121–126 (2015)

    Article  ADS  Google Scholar 

  • Askari, M.: A near infrared plasmonic perfect absorber as a sensor for hemoglobin concentration detection. Opt Quant. Electron. 53, 67 (2021)

    Article  Google Scholar 

  • Askari, M., Hosseini, M.V.: Infrared metamaterial refractive-index-based sensor. JOSA B 37(9), 2712–2718 (2020a)

    Article  ADS  Google Scholar 

  • Askari, M., Hosseini, M.V.: A novel metamaterial design for achieving a large group index via classical electromagnetically induced reflectance. Opt. Quant. Electron. 52, 191 (2020b)

    Article  Google Scholar 

  • Asli Nezhad, M.: High sensitivity refractive index and temperature sensor based on semiconductor metamaterial perfect absorber in the terahertz band. Opt. Commun. 463, 125411 (2020)

    Article  Google Scholar 

  • Bian, L.A., et al.: Controllable multi-mode absorption in terahertz absorber with graphene-dielectric-stack strips. Superlattice Microst. 150, 106784 (2021)

    Article  Google Scholar 

  • Chen, Z., Fan, W.: Ultra-flexible polarization-insensitive multiband terahertz metamaterial absorber. Appl. Opt. 54, 2376–2382 (2015)

    Article  ADS  Google Scholar 

  • Danaeifar, M., Granpayeh, N.: Graphene-based polarization-sensitive metasurfaces for integrated optics applications. Appl. Opt. 59, 10541–10546 (2020)

    Article  ADS  Google Scholar 

  • Ebrahimi, S.: Optical absorber based on self-similar cylindrical element for detecting optical material. Opt. Quant. Electron. 52, 87 (2020)

    Article  Google Scholar 

  • Esfandiari, M., et al.: Enhancing the sensitivity of a transmissive graphene-based plasmonic biosensor. Appl. Opt. 60, 1201–1208 (2021)

    Article  ADS  Google Scholar 

  • Ghods, M.M., Rezaei, P.: Graphene-based Fabry-Perot resonator for chemical sensing applications at mid-infrared frequencies. IEEE Photon. Technol. Lett. 30, 1917–1920 (2018a)

    Article  ADS  Google Scholar 

  • Ghods, M.M., Rezaei, P.: Ultra-wideband microwave absorber based on uncharged graphene layers. J. Electromag. Wav. Appl. 32, 1950–1960 (2018b)

    Article  Google Scholar 

  • Ghosh, S., Kumar, V.S.: A polarization-independent broadband multilayer switchable absorber using active frequency selective surface. IEEE Antennas Wirel. Propag. Lett. 16, 3147–3150 (2017)

    Article  ADS  Google Scholar 

  • Hu, D., et al.: Design of four-band terahertz perfect absorber based on a simple #-shaped metamaterial resonator. Appl. Phys. a. 122, 1–7 (2016)

    Article  ADS  Google Scholar 

  • Ikram, M., Nghia, N., Abbosh, A.: Hybrid antenna using open-ended slot for integrated 4G/5G mobile application. IEEE Antennas Wirel. Propag. Lett. 19, 710–714 (2020)

    Article  ADS  Google Scholar 

  • Jafari Chashmi, M., Rezaei, P., Kiani, N.: Polarization controlling of multi resonant graphene-based microstrip antenna, Plasmonics, 15 (2020a) 417–426.

  • JafariChashmi, M., Rezaei, P., Kiani, N.: Reconfigurable graphene-based V-shaped dipole antenna: From quasi-isotropic to directional radiation pattern. Optik 184, 421–427 (2019)

    Article  ADS  Google Scholar 

  • JafariChashmi, M., Rezaei, P., Kiani, N.: Y-shaped graphene-based antenna with switchable circular polarization. Optik 200, 163321 (2020b)

    Article  ADS  Google Scholar 

  • W. Jiang and T. Chen, A five-band absorber based on graphene metamaterial for terahertz ultra-sensing. Nanotechnol (2022) 33:165503.

  • Kazemi, F.: High Q-factor compact and reconfigurable THz aperture antenna based on graphene loads for detecting breast cancer cells. Superlattice. Microst. 153, 106865 (2021)

    Article  Google Scholar 

  • Khani, S., et al.: Tunable compact microstrip dual-band bandpass filter with tapered resonators. Microw. Opt. Technol. Lett. 60, 1256–1261 (2018)

    Article  Google Scholar 

  • Khani, S., Danaie, M., Rezaei, P.: Tunable single-mode bandpass filter based on metal–insulator–metal plasmonic coupled U-shaped cavities. IET Optoelectron. 13, 161–171 (2019)

    Article  Google Scholar 

  • Khani, S., Danaie, M., Rezaei, P.: Realization of a plasmonic optical switch using improved nano-disk resonators with Kerr-type nonlinearity: A theoretical and numerical study on challenges and solutions. Opt. Commun. 477, 126359 (2020a)

    Article  Google Scholar 

  • Khani, S., Danaie, M., Rezaei, P.: Compact and low-power all-optical surface plasmon switches with isolated pump and data waveguides and a rectangular cavity containing nano-silver strips. Superlattice. Microst. 141, 106481 (2020b)

    Article  Google Scholar 

  • Khani, S., Danaie, M., Rezaei, P.: Plasmonic all-optical metal–insulator–metal switches based on silver nano-rods. J. Comput. Electron. 20, 442–457 (2021)

    Article  Google Scholar 

  • Khatami, S.A., et al.: Compact via-coupling fed monopulse antenna with orthogonal tracking capability in radiation pattern. IEEE Antennas Wirel. Propag. Lett. 19, 1443–1446 (2020)

    Article  ADS  Google Scholar 

  • Kiani, S., Rezaei, P., Navaei, M.: Dual-sensing and dual-frequency microwave SRR sensor for liquid samples permittivity detection. Measurement 160, 107805 (2020)

    Article  Google Scholar 

  • Kiani, S., Rezaei, P., Fakhr, M.: A CPW-fed wearable antenna at ISM band for biomedical and WBAN applications, Wirel. Networks 27, 735–745 (2021a)

    Google Scholar 

  • Kiani, S., Rezaei, P., Navaei, M.: An overview of interdigitated microwave resonance sensors for liquid samples permittivity detection, Springer. Nature 7, 153–197 (2021b)

    Google Scholar 

  • Kiani, N., Hamedani, F.T., Rezaei, P.: Polarization controlling method in reconfigurable graphene-based patch four-leaf clover-shaped antenna. Optik 231, 166454 (2021c)

    Article  ADS  Google Scholar 

  • Kundu, D., Mohan, A., Chakrabarty, A.: Single-layer wideband microwave absorber using array of crossed dipoles. IEEE Antennas Wirel. Propag Lett. 15, 1589–1592 (2016)

    Article  ADS  Google Scholar 

  • Landy, N., et al.: Perfect metamaterial absorber. Phys. Rev. Lett. 100(20), 207402 (2008)

    Article  ADS  Google Scholar 

  • Lim, D., Sungjoon, L.: Ultrawideband electromagnetic absorber using sandwiched broadband metasurfaces. IEEE Antennas Wirel. Propag. Lett. 18, 1887–1891 (2019)

    Article  ADS  Google Scholar 

  • Meng, H., et al.: Tunable graphene-based plasmonic multispectral and narrowband perfect metamaterial absorbers at the mid-infrared region. Appl. Opt. 56, 6022–6027 (2017)

    Article  ADS  Google Scholar 

  • Meng, H.Y., et al.: A simple design of a multi-band terahertz metamaterial absorber based on periodic square metallic layer with T-shaped gap. Plasmonics 13, 269–274 (2018)

    Article  Google Scholar 

  • Mishra, R., Panwar, R.: Investigation of graphene fractal frequency selective surface loaded terahertz absorber. Opt. Quant. Electron. 52, 317 (2020)

    Article  Google Scholar 

  • Mousavi, Z., Rezaei, P., Rafii, V.: Single layer CPSSA array with change polarization diversity in broadband application. Int. J. RF Microw. Comput. Aided Eng. 27(4), e21075 (2017)

    Article  Google Scholar 

  • Mousavi, Z., et al.: Beam-steering antenna array based on a butler matrix feed network with CP capability for satellite application. J. Instrument. 14, P07005 (2019)

    Article  Google Scholar 

  • Nejat, M., Nozhat, N.: Ultrasensitive THz refractive index sensor based on a controllable perfect MTM absorber. IEEE Sens. J. 19, 10490–10497 (2019)

    Article  ADS  Google Scholar 

  • Norouzi-Razani, A., Rezaei, P.: Broadband polarization insensitive and tunable terahertz metamaterial perfect absorber based on the graphene disk and square ribbon. Micro Nanostruct. 163, 107153 (2022)

    Article  Google Scholar 

  • Sharbati, V., Rezaei, P., Fakharian, M.M.: A planar UWB antenna with switchable single/double band-rejection characteristics. Radioeng. J. 25, 429–435 (2016)

    Google Scholar 

  • Shimatani, M., et al.: Turbostratic stacked graphene-based high-responsivity mid-wavelength infrared detector using an enhanced photogating effect. Opt. Mater. Express 12(2), 458–467 (2022)

    Article  ADS  Google Scholar 

  • Soheilifar, M.R.: Wideband optical absorber based on plasmonic metamaterial cross structure, Opt. Quant. Electron. 50.442 (2018a).

  • Soheilifar, M.R.: Wideband optical absorber based on plasmonic metamaterial cross structure. Opt. Quant. Electron. 50, 442 (2018b)

    Article  Google Scholar 

  • Upender, P., Kumar, A.: Design of a multiband graphene-based absorber for terahertz applications using different geometric shapes. JOSA B 39(1), 188–199 (2022)

    Article  ADS  Google Scholar 

  • Wang, G.Z., Wang, B.: Five-band terahertz metamaterial absorber based on a four-gap comb resonator. J. Lightwav. Technol. 33, 5151–5156 (2015)

    Article  ADS  Google Scholar 

  • Yi, Z., et al.: Graphene-based tunable triple-band plasmonic perfect metamaterial absorber with good angle-polarization-tolerance. Res. Phys. 13, 102149 (2019)

    Google Scholar 

  • Yu, J.W., Cai, Y., Lin, X.Q., Wang, X.: Perforated multilayer ultra wideband absorber based on circuit analog absorber with optimal air spaces. IEEE Antennas Wirel. Propag. Lett. 19, 34–38 (2019)

    Article  ADS  Google Scholar 

  • Zamzam, P., Rezaei, P.: A terahertz dual-band metamaterial perfect absorber based on metal-dielectric-metal multi-layer columns. Opt. Quant. Electron. 53, 109 (2021)

    Article  Google Scholar 

  • Zamzam, P., Rezaei, P., Khatami, S.A.: Quad-band polarization-insensitive metamaterial perfect absorber based on bilayer graphene metasurface. Phys. E Low Dimens. Syst. Nanostruct. 128, 114621 (2021)

    Article  Google Scholar 

  • Zhou, P., et al.: A stretchable metamaterial absorber with deformation compensation design at microwave frequencies. IEEE Trans. Antennas Propag. 67, 291–297 (2018)

    Article  ADS  Google Scholar 

Download references

Acknowledgements

This research was supported by Semnan University. Also, the authors would like to thank the editor and reviewers for their constructive comments.

Funding

No funding was received for this research.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Pejman Rezaei.

Ethics declarations

Informed consent

Written informed consent for participate was obtained from all participants.

Conflict of interest

The authors declare that they have no conflict of interest.

Ethical approval

We declare that this article is original, has not been published before, and is not currently considered for publication elsewhere. We confirm that the manuscript has been read and approved by all named authors and that there are no other persons who satisfied the criteria for authorship but are not listed. We further confirm that the order of authors listed in the manuscript has been approved by all of us.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Khatami, S.A., Rezaei, P. & Zamzam, P. Quad band metal-dielectric-metal perfect absorber to selective sensing application. Opt Quant Electron 54, 638 (2022). https://doi.org/10.1007/s11082-022-03948-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s11082-022-03948-6

Keywords

Navigation