Abstract
The filling barricade is one of the key components of roadway cemented backfill systems and this research focuses on critical factors influencing the performance of these systems, particularly the lateral stress characteristics and the stability of the filling barricade. In this paper, a theoretical model is presented and applied to obtain and calculate the lateral pressures exerted on the filling barricade and to understand the effects of the filling process. It is found that the yield stress of cemented backfill increases with curing time and this relationship can be described as an increasing power function. The lateral stresses exerted on the filling barricade increase over time during the filling period but decrease over time during the waiting period. Both the maximum lateral stress exerted on the filling barricade and the decreasing amplitude decrease as the number of filling rounds increases. In the calculation case, the maximum lateral stress declines from 0.161 MPa to 0.0148 MPa when the number of filling rounds increases from one to six. From these results, the filling process with three rounds is determined to be the optimal process scheme. In the first round, the lateral stress increases to 0.0369 MPa during the filling period and decreases to 0.0146 MPa during the waiting period; In the second round, the lateral stress increases to 0.0368 MPa then decreases to 0 MPa; in the third round, the lateral stress of the filling barricade stays at 0 MPa.
Similar content being viewed by others
References
Amziane, S., Andriamanantsilavo, N.: Prediction of cement paste pore water pressure variations during setting period. Adv. Cem. Res. 16(1), 23–28 (2004). https://doi.org/10.1680/adcr.2004.16.1.23
Arinaitwe, E., Hou, Y., Tong, L., Klein, B.: Coarse size pre-concentration of low grade copper ores by dense medium separation. In: Conference of Metallurgists, Canadian Institute of Mining, Metallurgy and Petroleum, Vancouver, BC, Canada, 2014
Assaad, J., Khayat, K.H., Mesbah, H.: Assessment of thixotropy of flowable and self-consolidating concrete. ACI Mater. J. 100(2), 99–107 (2003a)
Assaad, J., Khayat, K.H., Mesbah, H.: Variation of formwork pressure with thixotropy of self-consolidating concrete. ACI Mater. J. 100(1), 29–37 (2003b)
Barnes, H.A.: A Handbook of Elementary Rheology. Institute of Non-Newtonian Fluid Mechanics, University of Wales, Aberystwyth (2000)
Bekkour, K., Leyama, M., Benchabane, A., Scrivener, O.: Time-dependent rheological behavior of bentonite suspensions: an experimental study. J. Rheol. 49(6), 1329–1345 (2005). https://doi.org/10.1122/1.2079267
Cihangir, F., Ercikdi, B., Kesimal, A., Turan, A., Deveci, H.: Utilisation of alkali-activated blast furnace slag in paste backfill of high-sulphide mill tailings: effect of binder type and dosage. Miner. Eng. 30, 33–43 (2012). https://doi.org/10.1016/j.mineng.2012.01.009
Cui, L., Fall, M.: Modeling of pressure on retaining structures for underground fill mass. Tunn. Undergr. Space Technol. 69, 94–107 (2017). https://doi.org/10.1016/j.tust.2017.06.010
Cui, L., Fall, M.: Modeling of self-desiccation in a cemented backfill structure. Int. J. Numer. Anal. Methods Geomech. 42(3), 558–583 (2018). https://doi.org/10.1002/nag.2756
Deng, X., Zhang, J., Kang, T., Han, X.: Strata behavior in extra-thick coal seam mining with upward slicing backfilling technology. Int. J. Min. Sci. Technol. 26(4), 587–592 (2016). https://doi.org/10.1016/j.ijmst.2016.05.009
Deng, X.J., Zhang, J.X., Zhou, N., de Wit, B., Wang, C.T.: Upward slicing longwall-roadway cemented backfilling technology for mining an extra-thick coal seam located under aquifers: a case study. Environ. Earth Sci. 76(23), 715–781 (2017). https://doi.org/10.1007/s12665-017-7120-9. 789
Deng, X., Klein, B., Tong, L., de Wit, B.: Experimental study on the rheological behavior of ultra-fine cemented backfill. Constr. Build. Mater. 158(1), 985–994 (2018a). https://doi.org/10.1016/j.conbuildmat.2017.05.085
Deng, X.J., Klein, B., Hallbom, D.J., de Wit, B., Zhang, J.X.: Influence of particle size on the basic and time-dependent rheological behaviors of cemented paste backfill. J. Mater. Eng. Perform. 27(7), 3478–3487 (2018b). https://doi.org/10.1007/s11665-018-3467-7
Deng, X.J., Klein, B., Zhang, J.X., Hallbom, D., de Wit, B.: Time-dependent rheological behaviour of cemented backfill mixture. Int. J. Surf. Min. Reclam. Environ. 32(3), 145–162 (2018c). https://doi.org/10.1080/17480930.2016.1239305
Doherty, J.P., Hasan, A., Suazo, G.H., Fourie, A.: Investigation of some controllable factors that impact the stress state in cemented paste backfill. Can. Geotech. J. 52(12), 1901–1912 (2015). https://doi.org/10.1139/cgj-2014-0321
Festugato, L., Fourie, A., Consoli, N.C.: Cyclic shear response of fibre-reinforced cemented paste backfill. Geotech. Lett. 3(1), 5–12 (2013). https://doi.org/10.1680/geolett.12.00042
Feys, D., Verhoeven, R., Schutter, G.D.: Evaluation of time independent rheological models applicable to fresh self-compacting concrete. Appl. Rheol. 17(5), 56244 (2007)
Hallbom, D.J.: Pipe Flow of Homogeneous Slurry. The University of British Columbia, Vancouver (2008)
Hallbom, D., Klein, B.: A physical model for yield plastic fluids. Part. Sci. Technol. 27(1), 1–15 (2009). https://doi.org/10.1080/02726350802611275
Hanehara, S., Yamada, K.: Rheology and early age properties of cement systems. Cem. Concr. Res. 38(2), 175–195 (2008). https://doi.org/10.1016/j.cemconres.2007.09.006
Iskander, M., Chen, Z., Omidvar, M., Guzman, I.: Rankine pseudo-static earth pressure for c–\(\phi \) soils. Mech. Res. Commun. 51, 51–55 (2013). https://doi.org/10.1016/j.mechrescom.2013.04.010
Khalili Garakani, A.H., Mostoufi, N., Sadeghi, F., Hosseinzadeh, M., Fatourechi, H., Sarrafzadeh, M.H., Mehrnia, M.R.: Comparison between different models for rheological characterization of activated sludge. Iran. J. Environ. Health Sci. Eng. 8(3), 255–264 (2011)
Khayat, K.H., Assaad, J.J.: Effect of w/cm and high-range water-reducing admixture on formwork pressure and thixotropy of self-consolidating concrete. ACI Mater. J. 103(3), 186–193 (2006)
Klein, B., Hallbom, D.: Rheology in mineral processing. In: Deepak, M., Patrick, T., Erik, S. (eds.) Recent Advances in Mineral Processing Plant Design, Littleton, CO, USA, pp. 406–418. Society for Mining Metallurgy and Exploration, Littleton (2009)
Klein, B., Laskowski, J.S.: Rheological measurements on settling suspensions: characterization of a cyanide Leach pulp. Miner. Process. Extr. Metall. Rev. 20(1), 41–55 (2000). https://doi.org/10.1080/08827509908962462
Klein, B., Laskowski, J.S., Partridge, S.J.: A new viscometer for rheological measurements on settling suspensions. J. Rheol. 39(5), 827–840 (1995). https://doi.org/10.1122/1.550620
Kwon, S.H., Shah, S.P., Phung, Q.T., Hong Kim, J., Lee, Y.: Intrinsic model to predict formwork pressure. ACI Mater. J. 107(1), 20–26 (2010)
Kwon, S.H., Phung, Q.T., Park, H.Y., Kim, J.H., Shah, S.P.: Effect of wall friction on variation of formwork pressure over time in self-consolidating concrete. Cem. Concr. Res. 41(1), 90–101 (2011). https://doi.org/10.1016/j.cemconres.2010.09.009
Lecompte, T., Perrot, A., Picandet, V., Bellegou, H., Amziane, S.: Cement-based mixes: shearing properties and pore pressure. Cem. Concr. Res. 42(1), 139–147 (2012). https://doi.org/10.1016/j.cemconres.2011.09.007
Mercier, S., Molinari, A.: Homogenization of elastic–viscoplastic heterogeneous materials: self-consistent and Mori–Tanaka schemes. Int. J. Plast. 25(6), 1024–1048 (2009). https://doi.org/10.1016/j.ijplas.2008.08.006
Ovarlez, G., Roussel, N.: A physical model for the prediction of lateral stress exerted by self-compacting concrete on formwork. Mater. Struct. 39(2), 269–279 (2006). https://doi.org/10.1617/s11527-005-9052-1
Saak, A.W., Jennings, H.M. Shah, S.P. : The influence of wall slip on yield stress and viscoelastic measurements of cement paste. Cem. Concr. Res. 31(2), 205–212 (2001)
Sant, G., Ferraris, C.F., Weiss, J.: Rheological properties of cement pastes: a discussion of structure formation and mechanical property development. Cem. Concr. Res. 38(11), 1286–1296 (2008). https://doi.org/10.1016/j.cemconres.2008.06.008
Suazo, G., Villavicencio, G.: Numerical simulation of the blast response of cemented paste backfilled stopes. Comput. Geotech. 100, 1–14 (2018). https://doi.org/10.1016/j.compgeo.2018.04.007
Sun, Q., Zhang, J., Zhou, N., Qi, W.: Roadway backfill coal mining to preserve surface water in western China. Mine Water Environ. 37(2), 366–375 (2017). https://doi.org/10.1007/s10230-017-0466-0
Thompson, B.D., Bawden, W.F., Grabinsky, M.W.: In situ measurements of cemented paste backfill at the Cayeli mine. Can. Geotech. J. 49(7), 755–772 (2012). https://doi.org/10.1139/t2012-040
Wallevik, J.E.: Rheological properties of cement paste: thixotropic behavior and structural breakdown. Cem. Concr. Res. 39(1), 14–29 (2009). https://doi.org/10.1016/j.cemconres.2008.10.001
Wu, A., Wang, Y., Wang, H., Yin, S., Miao, X.: Coupled effects of cement type and water quality on the properties of cemented paste backfill. Int. J. Miner. Process. 143(10), 65–71 (2015). https://doi.org/10.1016/j.minpro.2015.09.004
Xue, Y.: High large-scale mining stope retaining wall of all tailings filling reliability of the mechanical analysis. J. Jiangxi Univ. Sci. Technol. 29(5), 18–22 (2008)
Yang, P., Li, L., Aubertin, M., Brochu-Baekelmans, M., Ouellet, S.: Stability analyses of waste rock barricades designed to retain paste backfill. Int. J. Geomech. 17(3), 04016079 (2017). https://doi.org/10.1061/(ASCE)GM.1943-5622.0000740
Yi, P.: Analysis on mechanical property of retaining wall in tailing filling test area of Xianglushan tungsten mine. Nonferr. Met. Eng. Res. 35(3), 1–4 (2014)
Yilmaz, E., Belem, T., Bussière, B., Mbonimpa, M., Benzaazoua, M.: Curing time effect on consolidation behaviour of cemented paste backfill containing different cement types and contents. Constr. Build. Mater. 75, 99–111 (2015). https://doi.org/10.1016/j.conbuildmat.2014.11.008
Yilmaz, T., Ercikdi, B., Deveci, H.: Utilisation of construction and demolition waste as cemented paste backfill material for underground mine openings. J. Environ. Manag. 222, 250–259 (2018). https://doi.org/10.1016/j.jenvman.2018.05.075
Zhang, Y.: Study on the buffering cushion installed in retaining wall model test with expansive soil as backfill. Chin. J. Geotechn. Eng. 17(1), 38–45 (1995)
Zhang, B., Cao, Z., Zhao, Y., Yang, T., Zhao, K., Wu, L., Shao, H., Zeng, P.: Bulkhead stress analysis in filling cemented tailings and its practical application. Nonferr. Met. Sci. Eng. 2(5), 57–60 (2011). https://doi.org/10.13264/j.cnki.ysjskx.2011.05.005
Zhu, L., Sun, N., Papadopoulos, K., De Kee, D.: A slotted plate device for measuring static yield stress. J. Rheol. 45(5), 1105–1122 (2001). https://doi.org/10.1122/1.1392299
Acknowledgements
The authors would like to thank The University of British Columbia and those researchers who have made great contributions to the project. Special thanks go to the Mt. Polley mine for providing the tailings used in this research.
Funding
This work was supported by National Key R&D Program of China [Grant Number 2018YFC0604704], National Natural Science Foundation of China (Youth Program) [Grant Number 51804308], the Research Fund of The State Key Laboratory of Coal Resources and Safe Mining, CUMT [Grant Number SKLCRSM18KF022, SKLCRSM18KF021] and the Fundamental Funds for the Central Universities [Grant Number 2018QZ07].
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Declaration of conflicting interests
No potential conflict of interest was reported by the authors.
Rights and permissions
About this article
Cite this article
Deng, X., Zhang, J., Klein, B. et al. Time-dependent lateral pressure of the filling barricade for roadway cemented backfill mining technology. Mech Time-Depend Mater 24, 41–58 (2020). https://doi.org/10.1007/s11043-018-09405-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11043-018-09405-w