Abstract
In this paper, analytical solution has been obtained for a functionally graded, transversely isotropic, thermoelastic thick walled hollow cylinder (or disk) subjected to a thermal source. The linear theory of generalized thermoelasticity (Lord–Shulman model) has been employed to model the problem. The material stiffness and thermal conductivity have been assumed to vary as a simple power of the radial coordinate only. Keeping the inner and outer surfaces of the hollow cylinder traction free, a heat flux has been supplied on the inner surface to excite the body and outer surface is kept isothermal. The axisymmetry and plain strain (for cylinder) or plain stress (for disk) conditions have been considered here. The two coupled partial differential equations have been clubbed to obtain the general solution in Laplace domain. The residue calculus method has been employed to invert the transform to obtain the solution in physical domain. The solutions in case of classical coupled and uncoupled thermoelasticity; solid cylinder and infinite solid with cylindrical hole have been deduced as special cases of the present analysis. The results have also been validated with the existing one available in literature at various stages. The analytical results have been computed numerically and presented graphically for solid helium material. The effect of thermal relaxation time and grading parameter on the stresses, strains and temperature change produced in the FGM cylinder have been illustrated through the graphs. A comparative analysis has been done for homogeneous and functionally graded media for the distribution of radial stress, hoop stress, radial strain, hoop strain, radial displacement and temperature change with time, thermal relaxation time and thickness of the FGM cylinder.
Similar content being viewed by others
References
Aboudi J, Arnold SM, Pindera M-J (1994) Response of functionally graded composites to thermal gradients. Compos Eng 4:1–18
Aboudi J, Pindera M-J (1995) Thermoelastic theory for the response of materials functionally graded in two directions with applications to the free-edge problem. NASA TM 106882
Marrey RV, Sankar BV (1993) Stress gradient effects on stiffness and strength of textile composites. Compos Mater Struct 37:133–148
Nemat-Alla M (2003) Reduction of thermal stresses by developing two-dimensional functionally graded materials. Int J Solids Struct 40:7339–7356
Pitakthapanaphong S, Busso EP (2002) Self-consistent elastoplastic stress solutions for functionally graded material systems subjected to thermal gradients. J Mech Phys Solids 50:695–716
Praveen GN, Reddy JN (1998) Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates. Int J Solids Struct 35:4457–4476
Loy CT, Lam KY, Reddy JN (1999) Vibration of functionally graded cylindrical shells. Int J Mech Sci 41:309–324
Praveen GN, Chin CD, Reddy JN (1999) Thermoelastic analysis of functionally graded ceramic-metal cylinder. J Eng Mech 125:1259–1267
Pradhan SC, Loy CT, Lam KY, Reddy JN (2000) Vibration characteristics of functionally graded cylindrical shells under various boundary conditions. Appl Acoust 61:119–129
Liew KM, Kitipornchai S, Zhang XZ, Lim CW (2003) Analysis of the thermal stress behavior of functionally graded hollow circular cylinders. Int J Solids Struct 40:2355–2380
Jabbari M, Sohrabpor S, Eslami MR (2002) Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads. Int J Pres Ves Pip 79:493–497
Tarn JQ (2001) Exact solutions for functionally graded anisotropic cylinders subjected to thermal and mechanical loads. Int J Solids Struct 38:8189–8206
Ruhi M, Angoshtari A, Naghdabadi R (2005) Thermoelastic analysis of thick-walled finite-length cylinders of functionally graded materials. J Therm Stresses 28:391–408
Shao ZS, Wang TJ (2006) Three-dimensional solutions for the stress fields in functionally graded cylindrical panel with finite length and subjected to thermal/mechanical loads. Int J Solids Struct 43:3856–3874
Pelletier JL, Vel SS (2006) An exact solution for the steady-state thermoelastic response of functionally graded orthotropic cylindrical shells. Int J Solids Struct 43:1131–1158
Yang J, Liew KM, Wu YF, Kitipornchai S (2006) Thermo-mechanical post-buckling of FGM cylindrical panels with temperature-dependent properties. Int J Solids Struct 43:307–324
Liew KM, Yang J, Kitipornchai S (2004) Thermal post-buckling of laminated plates comprising functionally graded materials with temperature-dependent properties. ASME J Appl Mech 71:839–850
Gong SW, Lam KY, Reddy JN (1999) The elastic response of functionally graded cylindrical shells to low-velocity impact. Int J Impact Eng 22:397–417
Tanigawa Y, Morishita H, Ogaki S (1999) Derivation of system of fundamental equations for three-dimensional thermoelastic field with non-homogeneous material properties and its application to a semi-infinite body. J Therm Stresses 22:689–711
Yang J, Shen H-S (2002) Vibration characteristics and transient response of shear-deformable graded plates in thermal environments. J Sound Vib 255:579–602
Li Y, Meguid SA, Fu Y, Xu D (2014) Nonlinear analysis of thermally and electrically actuated functionally graded material microbeam. Proc R Soc A 470:20130473. doi:10.1098/rspa.2013.0473
Ma YJ, Yao XF, Liu XY, Hao WF, Fang DN (2013) Inversion and decoupling of thermo-mechanical deformation in anisotropic materials using the virtual fields method. Proc R Soc A 469:20130124. doi:10.1098/rspa.2013.0124
Hargan CO, Chan AM (1999) The pressurized hollow cylinder or disk problem for functionally graded isotropic linearly elastic materials. J Elasticity 55:43–59
Noda N, Ootao Y, Tanigawa Y (2012) Transient thermoelastic analysis for a functionally graded circular disk with piecewise power law. J Theor Appl Mech 50:831–839
Sharma JN, Sharma PK, Mishra KC (2014) Analysis of free vibrations in axisymmetric functionally graded thermoelastic cylinders. Acta Mech 225:1581–1594
Ghosh AK (1995) Axisymmetric vibration of a long cylinder. J Sound Vib 186:711–721
Batra RC, Iaccarino GL (2008) Exact solutions for radial deformations of a functionally graded isotropic and incompressible second-order elastic cylinder. Int J Nonlinear Mech 43:383–398
Noda N, Jin ZH (1993) Thermal stress intensity factor for a crack in a strip of functionally gradient material. Int J Solids Struct 30:1039–1056
Lord H, Shulman Y (1967) A generalized dynamic theory of thermoelasticity. J Mech Phys Solids 15:299–309
Dhaliwal RS, Singh A (1980) Dynamic coupled thermoelasticity. Hindustan Publ Corp, New Delhi
Le Page WR (1980) Complex variables and the laplace transform for engineers. Dover Publ, New York
Kar A, Kanoria M (2011) Analysis of thermoelastic response in a fiber reinforced thin annular disc with three-phase-lag effect. Eur J Pure Appl Math 4:304–321
Watson GN (1996) A treatise on the theory of bessel functions. Cambridge University Press, Cambridge
Carslaw HS, Jaeger JC (1959) Conduction of heat in solids. Clanderon Press, Oxford
Banerjee DK, Pao YHJ (1974) Thermoelastic waves in solids and thermal relaxation. J Acoust Soc Amer 56:1444–1453
Chandrasekharaiah DS (1996) Thermoelasticity with second sound—a review. Appl Mech Rev 39:355–376
Peng X, Li X (2009) Thermoelastic analysis of functionally graded annulus with arbitrary gradient. Appl Math Mech 30:1211–1220
Achenbach JD (1968) The influence of heat conduction on propagating stress jumps. J Mech Phys Solids 16:273
Sharma JN, Pathania V (2003) Generalized thermoelastic Lamb waves in a plate bordered with layers of inviscid liquid. J Sound Vib 268:897–916
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sharma, J.N., Sharma, P.K. & Mishra, K.C. Dynamic response of functionally graded cylinders due to time-dependent heat flux. Meccanica 51, 139–154 (2016). https://doi.org/10.1007/s11012-015-0191-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11012-015-0191-3