Skip to main content
SpringerLink
Log in

Deformations and stresses in annular disks made of functionally graded materials subjected to internal and/or external pressure

  • Published:
Meccanica Aims and scope Submit manuscript

Abstract

In this paper, an analytical solution is developed to determine deformations and stresses in circular disks made of functionally graded materials subjected to internal and/or external pressure. Taking mechanical properties of the materials of circular disks to be linear variations, the governing equation is derived from basic equations of axisymmetric, plane stress problems in elasticity. By transforming the governing equation into a hypergeometric equation, an accurate analytical solution of deformations and stresses in circular disks is obtained. The comparison with the numerical solution indicates that both approaches give very agreeable results, indicating correctness of the proposed analytical solution. The obtained analytical solution is employed to determine the radial displacement and stresses in circular disks subjected to external pressure, internal pressure, and internal and external pressure, respectively. How the radius ratio of circular disks affects deformations and stresses is also investigated.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Gamer U (1983) Ein beitrag zur spannungsermittlung in querpreßverbänden. Ing-Arch 53:209–217

    Article  MATH  Google Scholar 

  2. Gamer U (1984) The elastic-plastic stress distribution in the rotating annulus and in the annulus under external pressure. Z Angew Math Mech (J Appl Math Mech) 64:T126–T128

    Google Scholar 

  3. Güven U (1992) Elastic-plastic annular disk with variable thickness subjected to external pressure. Acta Mech 92:29–34

    Article  Google Scholar 

  4. Güven U (1993) On the stresses in an elastic-plastic annular disk of variable thickness under external pressure. Int J Solids Struct 30(5):651–658

    Article  MATH  Google Scholar 

  5. Güven U (1998) Stress distribution in a linear hardening annular disk of variable thickness subjected to external pressure. Int J Mech Sci 40(6):589–601

    Article  MATH  Google Scholar 

  6. Gamer U (1984) Elastic-plastic deformation of the rotating solid disk. Ing-Arch 54:345–354

    Article  MATH  Google Scholar 

  7. Güven U (1992) Elastic-plastic stresses in a rotating annular disk of variable thickness and variable density. Int J Mech Sci 34(2):133–138

    Article  MATH  Google Scholar 

  8. Güven U (1994) The fully plastic rotating solid disk of variable thickness. Z Angew Math Mech (J Appl Math Mech) 74(1):61–65

    Article  MATH  Google Scholar 

  9. Güven U (1998) Elastic-plastic stress distribution in a rotating hyperbolic disk with rigid inclusion. Int J Mech Sci 40(1):97–109

    Article  MATH  Google Scholar 

  10. You XY, You LH, Zhang JJ (2005) Elastic-plastic analysis of annular disks with nonlinear strain-hardening under external pressure. Z Angew Math Mech (J Appl Math Mech) 85(3):202–210

    Article  MATH  Google Scholar 

  11. You LH, Long SY, Zhang JJ (1997) Perturbation solution of rotating solid disks with nonlinear strain-hardening. Mech Res Commun 24(6):649–658

    Article  MATH  Google Scholar 

  12. You LH, Zhang JJ (1999) Elastic-plastic stresses in a rotating solid disk. Int J Mech Sci 41:269–282

    Article  MATH  Google Scholar 

  13. Dao M, Gu P, Maewal A, Asaro RJ (1997) A micromechanical study of residual stresses in functionally graded materials. Acta Mater 45(8):3265–3276

    Article  Google Scholar 

  14. Qian LF, Batra RC, Chen LM (2004) Static and dynamic deformations of thick functionally graded elastic plates by using higher-order shear and normal deformable plate theory and meshless local Petrov-Galerkin method. Compos Part B Eng 35(6):685–697

    Article  Google Scholar 

  15. Güven U (2001) On stress distributions in functionally graded isotropic spheres subjected to internal pressure. Mech Res Commun 28(3):277–281

    Article  MATH  Google Scholar 

  16. Durodola JF, Attia O (2000) Deformation and stresses in functionally graded rotating disks. Compos Sci Technol 60:987–995

    Article  Google Scholar 

  17. Güven U, Çelik A (2001) On transverse vibrations of functionally graded isotropic linearly elastic rotating solid disks. Mech Res Commun 28(3):271–276

    Article  MATH  Google Scholar 

  18. You LH, Ou H, Zheng ZY (2007) Creep deformations and stresses in thick-walled cylindrical vessels of functionally graded materials subjected to internal pressure. Compos Struct 78:285–291

    Article  Google Scholar 

  19. You LH, Tang YY, Zhang JJ, Zheng CY (2000) Numerical analysis of elastic-plastic rotating disks with arbitrary variable thickness and density. Int J Solids Struct 37(2):7809–7820

    Article  MATH  Google Scholar 

  20. Abramowitz M, Stegun AI (1966) Handbook of mathematical functions, 5th edn. US Government Printing Office, Washington

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. NCCA, Bournemouth University, Poole, BH12 5BB, UK

    L. H. You

  2. The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing City, 400044, China

    L. H. You, J. X. Wang & B. P. Tang

Authors
  1. L. H. You
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. J. X. Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. B. P. Tang
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to L. H. You.

Rights and permissions

Reprints and permissions

About this article

Cite this article

You, L.H., Wang, J.X. & Tang, B.P. Deformations and stresses in annular disks made of functionally graded materials subjected to internal and/or external pressure. Meccanica 44, 283–292 (2009). https://doi.org/10.1007/s11012-008-9174-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11012-008-9174-y

Keywords

Search

Navigation