Skip to main content
SpringerLink
Log in

Mathematical Prediction of the Properties of Heat-Resistant Nickel Alloys After Directional Crystallization

  • Published:
Materials Science Aims and scope

The ratio of alloying elements Kγ which can be used for estimation of mechanical properties, taking into account the complex influence of the main components of an alloy, is proposed for the first time. Regression models are presented, with the help of which it is possible to calculate dimensional mismatch, strength, heat resistance, number of γ′-phases and density of alloys with high accuracy. The regularities of the chemical composition influence on the properties of heat-resistant nickel alloys of directional crystallization is established. For multicomponent nickel systems, it is possible to predict with high probability a misfit, which significantly affects the strength characteristics of alloys of this grade. The perspective and effective direction for prediction of the basic characteristics, which influence a complex of service properties of alloys both during the development of new compositions of the known industrial grades and their improvement, is shown.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.

Similar content being viewed by others

References

  1. Y. A. Bondarenko, A. B. Echin, V. E. Bazhenov, and A. V. Koltygin, “Simulation of the temperature distribution on the mold surface and inside casting during high-gradient directional solidification,” Russ. J. Non-Ferrous Metals, 58, Is. 5, 481–488 (2017); https://doi.org/10.3103/S1067821217050042.

  2. N. Das, “Advances in nickel-based cast superalloys,” Trans. of the Indian Ins. of Metals, 63, Is. 2–3, 265–274(2010); https://doi.org/10.1007/s12666-010-0036-7.

  3. K. Mukai, Z. Li, and K. C. Mills, “Prediction of the densities of liquid Ni-based superalloys,” Metallurg. and Mater. Trans. B, 36, Is. 2, 255–262 (2005); https://doi.org/10.1007/s11663-005-0027-y.

  4. Z. Li, and K. C. Mills, “The effect of γ′ content on the densities of Ni-based superalloys,” Metallurg. and Mater. Trans. B, 37, Is. 5, 781–790 (2006); https://doi.org/10.1007/s11663-006-0060-5.

  5. J. Huang, X. Yang, D. Shi, H. Yu, and X. Hu, “A simple unified critical plane damage parameter for high-temperature LCF life prediction of a Ni-based DS superalloy,” J. Mater. Sci., 49, Is. 22, 7625–7638 (2014); https://doi.org/10.1007/s10853-014-8418-6.

  6. L. Li, A. Deceuster, and C. Zhang, “Effect of process parameters on pulsed-laser repair of a directionally solidified superalloy,” Metallography, Microstructure, and Analysis, 1, Is. 92–98 (2012); https://doi.org/10.1007/s13632-012-0016-x.

  7. M. Z. Alam, N. Hazari, and D. K. Das, “Microstructure and oxidation performance of a γ-γ′ Pt-aluminide bond coat on directionally solidified superalloy CM-247LC,” Bull. of Mater. Sci., 37, Is. 6, 1551–1561 (2014); https://doi.org/10.1007/s12034-014-0110-6.

  8. L. Wu, T. Osada, I. Watanabe, T. Yokokawa, T. Kobayashi, and K. Kawagishi, “A new approach to strength prediction of Ni-base disk superalloys with dual-phase γ/γ′, in: The Minerals, Metals & Materials Series. Superalloys 2020, Cham: Springer (2020), pp. 651–658; https://doi.org/10.1007/978-3-030-51834-9_63.

  9. K. S. Chan, “Mechanistic modeling of strain hardening in Ni-based superalloys,” Metallurgical and Mater. Tran. A., 51, Is. 11, 5653–5666 (2020); https://doi.org/10.1007/s11661-020-05965-0.

  10. O. I. Balitskii, Yu. H. Kvasnytska, L. M. Ivaskevych, H. P. Mialnitsa, and K. H. Kvasnytska, “Fatigue fracture of the blades of gas-turbine engines made of a new refractory nickel alloy,” Mater. Sci., 57, No. 4, 475–483 (2022); https://doi.org/10.1007/s11003-022-00568-z.

    Article  Google Scholar 

  11. H.-T. Li, Y.-C. Liang, W.-L. Zhong, X.-Z. Qin, J.-T. Guo, L.-Z. Zhou, and W.-L. Ren, “Tensile properties and deformation behavior of several cast Ni-based superalloys fabricated by different solidification ways,” Acta Metallurgica Sinica (Engl. Lett.), 30, Is. 3, 280–288 (2017); https://doi.org/10.1007/s40195-016-0499-6.

  12. A. A. Glotka, and S. V. Gaiduk, “Distribution of alloying elements in the structure of heat-resistant nickel alloys in secondary carbides,” J. of Appl. Spectroscopy, 87, Is. 5, 812–819 (2020); https://doi.org/10.1007/s10812-020-01075-2.

  13. Yu. H. Kvasnytska, L. M. Ivaskevych, O. I. Balytskyi, I. I. Maksyuta, and H. P. Myalnitsa, “High-temperature salt corrosion of a heat-resistant nickel alloy,” Mater. Sci., 56, No 3, 432–440 (2020); https://doi.org/10.1007/s11003-020-00447-5.

    Article  CAS  Google Scholar 

  14. R. Mitchell. and M. Preuss, “Inter-relationships between composition, γ′ morphology, hardness, and γ-γ′ mismatch in advanced polycrystalline nickel-base superalloys during aging at 800°C,” Metallurgical and Mater. Transactions A., 38, Is. 3, 615–627 (2007); https://doi.org/10.1007/s11661-007-9089-6.

  15. M. A. Charpagne, T. Billot, J. M. Franchet, and N. Bozzolo, Heteroepitaxial recrystallization, a new recrystallization mechanism in sub-solvus forged γ-γ′ nickel-based superalloys with low lattice mismatch, in: Proc. of the 6th Int. Conf. on Recrystallization and Grain Growth, Cham: Springer, 259–264 (2016); https://doi.org/10.1007/978-3-319-48770-0_38.

  16. Z. Ma, Y.-L. Pei, L. Luo, L. Qin, S.-S. Li, and S.-K. Gong, “Partitioning behavior and lattice misfit of γ/γ′ phases in Ni-based superalloys with different Mo additions,” Rare Metals, 40, Is. 4, 920–927 (2021); https://doi.org/10.1007/s12598-019-01309-z.

  17. N. Chapman, S. Gray, J. Sumner, and J. Nicholls, “Stress corrosion testing of CMSX-4, CM247LC DS and IN6203DS Ni-base superalloys,” Oxidation of Metals, 95, Is. 1–2, 85–104 (2021); https://doi.org/10.1007/s11085-020-10011-w.

  18. M. Fleck, F. Schleifer, M. Holzinger, and U. Glatzel, “Phase-field modeling of precipitation growth and ripening during industrial heat treatments in Ni-base superalloys,” Metallurgical and Mater. Transactions A, 49, Is. 9, 4146–4157 (2018); https://doi.org/10.1007/s11661-018-4746-5

  19. H. M. Tawancy, “On the evolution of microstructure of Gamma Prime + Gamma Platinum bond coats deposited on Ni-based superalloys and their oxidation resistance: role of superalloy substrate,” Metallography, Microstructure, and Analysis, 6, Is. 4,315–323 (2017); https://doi.org/10.1007/s13632-017-0364-7.

  20. G. Mi, Y. Liu, S. Tian, and Z. Li, “Microstructure and mechanical properties of spray deposited Ni-based superalloys,” J. Wuhan Univ. Technol., Mat. Sci. Ed., 24, art. no. 796 (2009); https://doi.org/10.1007/s11595-009-5796-8.

  21. Z. Li, K. C. Mills, M. McLean, and K. Mukai, “Measurement of the density and surface tension of Ni-based superalloys in the liquid and mushy states”, Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 36, Is. 2, 247–254 (2005); https://doi.org/10.1007/s11663-005-0026-z

  22. A. I. Balyts’kyi, Yu. H. Kvasnyts’ka, L. M. Ivas’kevich, and H. P. Myal’nitsa, “Corrosion- and hydrogen-resistance of heat-resistant blade nickel-cobalt alloys,” Mater. Sci., 54, No 2, 230–239 (2018); https://doi.org/10.1007/s11003-018-0178-z.

  23. O. A. Glotka, and S. V. Haiduk, “Distribution of elements in carbides of multicomponent superalloys,” Metallofizika i Noveishie Tekhnologii, 42, No 6, 869–884 (2020); https://doi.org/10.15407/mfint.42.06.0869.

    Article  CAS  Google Scholar 

  24. A. I. Balitskii, and L. M. Ivaskevich, “Assessment of hydrogen embrittlement in high-alloy chromium-nickel steels and alloys in hydrogen at high pressures and temperatures,” Strength of Mater., 50, 880–887 (2018); https://doi.org/10.1007/s11223-019-00035-2.

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. National University “Zaporizhzhia Polytechnic”, Zaporizhzhia, Ukraine

    O. A. Glotka & V. Yu. Olshanetskii

Authors
  1. O. A. Glotka
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. V. Yu. Olshanetskii
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to O. A. Glotka.

Additional information

Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 58, No. 5, pp. 115–121, September–October, 2022.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Glotka, O.A., Olshanetskii, V.Y. Mathematical Prediction of the Properties of Heat-Resistant Nickel Alloys After Directional Crystallization. Mater Sci 58, 679–685 (2023). https://doi.org/10.1007/s11003-023-00716-z

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11003-023-00716-z

Keywords

Search

Navigation