Skip to main content
Log in

An Approach of the Sintering YBa2Cu3O7−δ System

  • Original Paper
  • Published:
Journal of Superconductivity and Novel Magnetism Aims and scope Submit manuscript

Abstract

The abnormal glow discharge applied to the sintering process is a recent technique used for processing both metallic and ceramic materials. In this paper, we use the abnormal glow discharge as an alternative method for the sintering step of the YBa2Cu3O7−δ superconductor material. The physical properties of the sintered samples by glow discharge were compared with the properties of sintered samples in resistive furnace, which is commonly used for production of high temperature superconductor ceramics. The structural analysis of the YBa2Cu3O7−δ samples was carried out by the X-ray diffraction technique, microstructural analysis by Scanning Electron Microscopy and electrical resistivity by the four probes method (resistance measurements as a function of temperature). The experimental results permitted to establish the similar structure and morphology for all samples: produced by plasma and resistive furnace sintering. The superconducting behavior was corroborated for both sintering processes.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Supardi, Z., Delabouglise, G., Peroz, C., Sin, A., Villard, C., Odier, P., Weiss, F.: Epitaxial thick film of YBCO by high temperature spray pyrolysis for coated conductors. Physica C 386, 296–299 (2003)

    Article  ADS  Google Scholar 

  2. Vergnieres, L., Odier, P., Weiss, F., Bruzek, C.-E., Saugrain, J.M.: Epitaxial thick films by spray pyrolysis for coated conductors. J. Eur. Ceram. Soc. 25, 2951–2954 (2005)

    Article  Google Scholar 

  3. Jergel, M.: Synthesis of high T c superconducting films by deposition from an aerosol. Supercond. Sci. Technol. 8, 67–78 (1995)

    Article  ADS  Google Scholar 

  4. Young, W.S., Cutler, I.B.: Initial sintering with constant rates of heating. J. Am. Ceram. Soc. 53(12), 659 (1970)

    Article  Google Scholar 

  5. Chapman, B.: Glow Discharge Processes. Wiley, New York (1980)

    Google Scholar 

  6. Chu, C.W., et al.: Phys. Superconductivity at 93 K in a new mixed-phase Y–Ba–Cu–O compound system at ambient pressure. Phys. Rev. Lett. 58, 908–910 (1987)

    Article  ADS  Google Scholar 

  7. Reed, J.S.: Principles of Ceramic Processing, 2nd edn. Wiley, New York (1995)

    Google Scholar 

  8. Young, R.A.: The Rietveld Method. Oxford University Press, London (1993)

    Google Scholar 

  9. Verprěk, S.: Thermodynamic and kinetic aspects of heterogeneous reactions in a nonisothermal low pressure plasma. IEEE Trans. Plasma Sci. PS-2(1), 25–33 (1974)

    ADS  Google Scholar 

  10. Martínez, D., Parra Vargas, C.A., Landínez Téllez, D.A., Roa-Rojas, J.: Produccion y Caracterizacion del Material Superconductor Yb0.6Sm0.4Ba2Cu3O7-d. Rev. Colomb. Fís. 40(1) (2008)

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to A. Sarmiento Santos.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Sarmiento Santos, A., Roa Rojas, J., Martínez, D. et al. An Approach of the Sintering YBa2Cu3O7−δ System. J Supercond Nov Magn 26, 2247–2251 (2013). https://doi.org/10.1007/s10948-012-1445-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10948-012-1445-0

Keywords

Navigation