Abstract
Mesoporous type-MCM-48 silica was grafted with polyacrylamide (PAAm) by using an azo-type initiator. The effect of monomer and initiator concentrations, reaction time, and temperature were evaluated to determine the optimal grafting conditions. Functionalized MCM-48 silicas were characterized by X-ray diffraction (XRD), infrared spectroscopy, thermogravimetric analysis, nitrogen adsorption–desorption analyses, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) which confirmed the grafting process. According to XRD, SEM and TEM results, PAAm-modified MCM-48 silica did not show changes in its morphology and mesostructure by comparing with pristine MCM-48. Also, modified silicas were tested as delivery system using nalidixic acid as drug model. MCM-48-PAAm silicas were able to load more significant amounts of nalidixic acid than the unmodified MCM-48, and showed a sustained delivery behaviour, releasing about 80% of drug.
Similar content being viewed by others
References
P. van der Voort, C. Vercaemst, D. Schaubroeck, F. Verpoort, Phys. Chem. Chem. Phys. 10, 347 (2008)
D.W. Lee, B.R. Yoo, J. Ind. Eng. Chem. 38, 1 (2016)
D. Tang, W. Zhang, Z. Qiao, Y. Liu, Q. Huo, RSC Adv. 6, 16461 (2016)
A.F. Moreira, D.R. Dias, I.J. Correia, Microporous Mesoporous Mater. 236, 141 (2016)
M. Bhagiyalakshmi, L.J. Yun, R. Anuradha, H.T. Jang, J. Hazard. Mater. 175, 928 (2010)
A. Bento, J.P. Lourenco, A. Fernandes, M.R. Ribeiro, J. Arranz-Andres, V. Lorenzo, M.L. Cerrada, J. Membr. Sci. 415, 702 (2012)
P. Kumar, V.V. Guliants, Microporous Mesoporous Mater. 132, 1 (2010)
R.J. Kalbasi, N. Mosaddegh, Catal. Commun. 12, 1231 (2011)
H. Zhang, P. Zhang, K. Ye, Y. Sun, S. Jiang, Y. Wang, W. Pang, J. Lumin. 117, 68 (2006)
M. Comes, M.D. Marcos, R. Martinez-Manez, F. Sancenon, L.A. Villaescusa, A. Graefe, G.J. Mohr, J. Mater. Chem. 18, 5815 (2008)
Y. Zhang, Z. Wang, W. Zhou, G. Min, M. Lang, Appl. Surf. Sci. 276, 769 (2013)
S. Gai, P. Yang, D. Wang, C. Li, N. Niu, F. He, M. Zhang, J. Lin, RSC Adv. 2, 3281 (2012)
C. Yagüe, M. Moros, V. Grazú, M. Arruebo, J. Santamaría, Chem. Eng. J. 137, 45 (2008)
C. Pandis, S. Trujillo, M. Roganowicz, J.L.G. Gomez Ribelles, Macromol. Symp. 341, 34 (2014)
Z.T. Mazraeh-Shahi, A.M. Shoushtari, A.R. Bahramian, M. Abdouss, J. Ind. Eng. Chem. 21, 797 (2015)
A. Salama, J. Carbohydr. Chem. 35, 131 (2016)
T. Lee, S.S. Park, Y.I. Jung, S. Han, D. Han, I. Kim, C.S. Ha, Eur. Polym. J. 45, 19 (2009)
K. Bula, L Klapiszewski, T. Jesionowski, Polym. Compos. 36, 913 (2015)
J.M. Campos, J.P. Lourenco, E. Perez, M.L. Cerrada, M.R. Ribeiro, J. Nanosci. Nanotechnol. 9, 3966 (2009)
M.T. Run, S.Z. Wu, D.Y. Zhang, G. Wu, Mater. Chem. Phys. 105, 341 (2007)
Z. Saeedifar, A.A. Nourbakhsh, R.J. Kalbasi, E. Karamian, J. Mater. Sci. Technol. 29, 255 (2013)
A. Saad, I. Bakas, J.Y. Piquemal, S. Nowak, M. Abderrabba, M.M. Chehimi, Appl. Surf. Sci. 367, 181 (2016)
A. Wach, M. Drozdek, B. Dudek, P. Kustrowski, Surf. Interface Anal. 46, 1021 (2014)
J. He, Y. Shen, D.G. Evans, Microporous Mesoporous Mater. 109, 73 (2008)
Y.L. Khung, D. Narducci, Adv. Colloid Interface Sci. 226, 166 (2015)
C.T. Kresge, W.J. Roth, Chem. Soc. Rev. 42, 3663 (2013)
S. Kim, J. Ida, V.V. Guliants, J.Y.S. Lin, J. Phys. Chem. B 109, 6287 (2005)
H. Aghaei, A.A. Nourbakhsh, S. Karbasi, R.J. Kalbasi, M. Rafienia, N. Nourbakhsh, S. Bonakdar, K.J.D. Mackenzieh, Ceram. Int. 40, 7355 (2014)
A.J. Di Pasqua, K.K. Sharma, Y.L. Shi, B.B. Toms, W. Ouellette, J.C. Dabrowiak, T. Asefa, J. Inorg. Biochem. 102, 1416 (2008)
N. Niu, F. He, P.A. Ma, S.L. Gai, G.X. Yang, F.Y. Qu, Y. Wang, J. Xu, P.P. Yang, ACS Appl. Mater. Interface 6, 3250 (2014)
M.S. Gualdesi, C.I. Igarzabal, J. Vara, C.S. Ortiz, Int. J. Pharm. 512, 213 (2016)
S.J. Lu, K.G. Neoh, C. Huang, Z.L.E.T. Shi, J. Colloid Interface Sci. 412, 46 (2013)
Y. Zhao, Y.M. Shen, L. Bai, S.Q. Ni, Appl. Surf. Sci. 261, 708 (2012)
Y. Zhao, Y. Shen, L. Bai, J. Colloid Interface Sci. 379, 94 (2012)
H. Ramadan, A. Ghanem, H. El-Rassy, Chem. Eng. J. 159, 107 (2010)
Y.Q. Zou, S.S. Li, Y.Q. Wang, C.X. Yuan, W.J. Yuan, L. Zheng, X.L. Han, J. Appl. Polym. Sci. 133, 43922 (2016)
L. Treccani, T.Y. Klein, F. Meder, K. Pardun, K. Rezwan, Acta Biomater. 9, 7115 (2013)
A. Dabbagh, B.J.J. Abdullah, N.H. Abu Kasim, H. Abdullah, M. Hamdi, Int. J. Hyperther. 31, 375 (2015)
H.I. Meléndez-Ortiz, Y.A. Perera-Mercado, L.A. García-Cerda, J.A. Mercado-Silva, G. Castruita, Ceram. Int. 40, 4155 (2014)
Y. Kitahara, K. Okuyama, K. Ozawa, T. Suga, S. Takahashi, T. Fujii, J. Therm. Anal. Calorim. 110, 423 (2012)
B. Marler, U. Oberhagemann, S. Vortmann, H. Gies, Microporous Mater. 6, 375 (1996)
K.S.W. Sing, D.H. Everett, R.A.W. Haul, L. Moscou, R.A. Pieroti, J. Rouquerol, T. Siemieniewska, Pure Appl. Chem. 57, 603 (1985)
G. Grover, S.G. Kini, Eur. J. Med. Chem. 41, 256 (2006)
E. Hiriart-Ramírez, A. Contreras-García, M.J. Garcia-Fernandez, A. Concheiro, C. Alvarez-Lorenzo, E. Bucio, Cellulose 19, 2165 (2012)
H.R. Park, T.H. Kim, K.M. Bark, Eur. J. Med. Chem. 37, 443 (2002)
Acknowledgements
Authors thank the financial support of CIQA (project 6245). H.I. Melendez-Ortiz and L. García-Uriostegui are particularly grateful to the program Cátedras-CONACyT (Mexico). Also, we thank to E. Díaz, and H. Saade from CIQA for the TEM, and nitrogen adsorption–desorption studies respectively, and J.A. Mercado-Silva for his technical assistance.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflicts of interest
There is not conflicts of interest.
Rights and permissions
About this article
Cite this article
Meléndez-Ortiz, H.I., Puente-Urbina, B., Ibarra-Vallejo, E. et al. Polyacrylamide-coated MCM-48 mesoporous silica spheres: synthesis, characterization and drug delivery study. J Porous Mater 25, 649–656 (2018). https://doi.org/10.1007/s10934-017-0477-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10934-017-0477-z