Abstract
The regularities of change in the efficiency of spiroid speed-reduction gearing depending on the load torque are experimentally established and the rated parameters are determined for the torques on the nonstop run. The relation between the average efficiencies and the spiroid pair gear ratio is found.
Similar content being viewed by others
References
O. E. Saari, Pat. 2696125 USA. Speed-reduction Gearing.
V. I. Gol’dfarb, “Development of the research method and spiroid gear manufacturing — the basic scientific trend of the Institute of Mechanics of IzhGTU,” in: Proceedings of the International Workshop “State-of-the-Art Information Technologies. Problems of Investigating, Designing and Manufacturing the Gearing [in Russian], IzhGTU, Izhevsk (2001).
A. K. Georgiev and N. S. Golubkov, “On determination of the gearing action force and efficiency in the most general case of a spiroid gear,” in: Mechanical Transmissions. Inter-University Collected Works [in Russian], Issue 1, IzhGTU, Izhevsk (1972).
V. I. Gol’dfarb, A. S. Kuniver, and V. N. Mokretsov, “Estimate methodology and data for the spiroid gear load capacity,” in: Theory of the Real Gearing [in Russian], KGTU, Kurgan (1993).
W. D. Nelson, “Spiroid gearing,” Machine Design, No. 3 (1961).
Author information
Authors and Affiliations
Additional information
__________
Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 6, pp. 106–110, November–December, 2006.
Rights and permissions
About this article
Cite this article
Anferov, V.N., Koval’kov, A.A. Test data for the efficiency of the spiroid spur gearing. J Min Sci 42, 617–621 (2006). https://doi.org/10.1007/s10913-006-0108-6
Received:
Issue Date:
DOI: https://doi.org/10.1007/s10913-006-0108-6