Abstract
The problem of two edge cracks of finite length, situated symmetrically in an orthotropic infinite strip of finite thickness 2 h, under normal point loading has been discussed. The displacements and stresses in plane strain conditions are expressed in terms of two harmonic functions. The problem is addressed by seeking the solution of a pair of simultaneous integral equations with Cauchy type singularities solved by finite Hilbert Transform technique. For large h, analytical expression for the stress intensity factor at the crack tip is obtained.
Similar content being viewed by others
References
Delale F., Erdogan F. (1977) The problem of internal and edge cracks in an orthotropic strip. ASME Transaction, Series E – journal of Applied Mechanics 44: 237–242
Fedrici L, Piva A., Viola A. (1999) Crack edge displacement and elastic constant determination for an orthotropic material. Theoretical and Applied Mechanics 31: 173–187
Hearman R.F.S. (1961) An introduction to applied anisotropic elasticity. Oxford University Press publications, Oxford, UK
Ishida R. (1989) On a single edge crack problem in an elastic strip. Archive of Applied Mechanics 59: 296–303
Kuliev V.D., Zhekov N.D. (1987) An edge crack in an orthotropic half plane. Material Science 23: 68–72
Lekhnitskii S.G. (1963) Theory of Elasticity of Anisotropic Elastic Body. Holden-Day, Sanfrancisco
Sweeney J. (1988) The stress intensity for an edge crack in a semi-infinite orthotropic body. International Journal of Fracture 37: 233–241
Tricomi F.G. (1951) On the finite Hilbert transformation. The Quarterly Journal of Mathematics 2: 199–211
Walker C.A., Jamassri (1995) Mixed-mode stress intensity factors in finite, edge-cracked orthotropic plates. Journal of strain analysis for Engineering Design 30: 83–90
Wang Q., Ji X., Wang Y. (1996) A note on edge cracks in an orthotropic infinite Strip. International Journal of Fracture 5: R37–R41
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Das, S., Chakraborty, S., Srikanth, N. et al. Symmetric Edge Cracks in an Orthotropic Strip Under Normal Loading. Int J Fract 153, 77–84 (2008). https://doi.org/10.1007/s10704-008-9284-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10704-008-9284-5