Abstract
Thermal drying makes cellulosic fibers shrink, resulting in pore collapse and degraded fiber performance. However, in this work, the pores of cellulose fibers expanded in the later stage of low-temperature thermal drying by regulating the fiber stacked structure before drying, which was called “low-temperature pore expansion effects”. The results showed a high content of lignin was required because there were no low-temperature pore expansion effects during the drying process of low lignin-containing cellulosic fibers. Three-dimensional fiber stacked structure was also necessary because cellulose fiber materials with two-dimensional stacked structure, such as paper, had no pore expansion effects. The pore expansion effects first strengthened and then weakened with increasing temperature, and the optimum temperature was 60 °C. According to the results, the pore expansion effects included the pore shrinkage period and pore expansion period. Finally, a possible lignin-cellulose phase separation mechanism was proposed to explain this phenomenon. This work reveals the special ultrastructural transformation of cellulosic fibers under low-temperature drying, providing a reference for precise regulation of the properties of dried fibers.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Data availability
The data that support the findings of this study are available from the corresponding authors on reasonable request.
References
Agarwal UP, Ralph SA, Reiner RS, Baez C (2018) New cellulose crystallinity estimation method that differentiates between organized and crystalline phases. Carbohydr Polym 190:262–270. https://doi.org/10.1016/j.carbpol.2018.03.003
Aghajanzadeh S, Fayaz G, Soleimanian Y, Ziaiifar AM, Turgeon SL, Khalloufi S (2022) Hornification: lessons learned from the wood industry for attenuating this phenomenon in plant-based dietary fibers from food wastes. Compr Rev Food Sci Food Saf. https://doi.org/10.1111/1541-4337.13047
Allen T (1997) Surface area and pore size determination. In: Allen T (ed) Particle size measurement. Springer, London, pp 44–108
Broda M, Curling SF, Frankowski M (2021) The effect of the drying method on the cell wall structure and sorption properties of waterlogged archaeological wood. Wood Sci Technol 55(4):971–989. https://doi.org/10.1007/s00226-021-01294-6
Chandel AK, Garlapati VK, Singh AK, Antunes FAF, Da Silva SS (2018) The path forward for lignocellulose biorefineries: bottlenecks, solutions, and perspective on commercialization. Bioresour Technol 264:370–381. https://doi.org/10.1016/j.biortech.2018.06.004
Chen Y, Wang Y, Wan J, Ma Y (2010) Crystal and pore structure of wheat straw cellulose fiber during recycling. Cellulose 17(2):329–338. https://doi.org/10.1007/s10570-009-9368-z
Chen Y, Wan J, Huang M, Ma Y, Wang Y, Lv H, Yang J (2011) Influence of drying temperature and duration on fiber properties of unbleached wheat straw pulp. Carbohydr Polym 85(4):759–764. https://doi.org/10.1016/j.carbpol.2011.03.041
Chen Y, Jiang Y, Wan J, Wu Q, Wei Z, Ma Y (2018) Effects of wet-pressing induced fiber hornification on hydrogen bonds of cellulose and on properties of eucalyptus paper sheets. Holzforschung 72(10):829–837. https://doi.org/10.1515/hf-2017-0214
Claramunt J, Ardanuy M, García-Hortal JA (2010) Effect of drying and rewetting cycles on the structure and physicochemical characteristics of softwood fibres for reinforcement of cementitious composites. Carbohydr Polym 79(1):200–205. https://doi.org/10.1016/j.carbpol.2009.07.057
Diniz JF, Gil MH, Castro J (2004) Hornification—its origin and interpretation in wood pulps. Wood Sci Technol 37(6):489–494. https://doi.org/10.1007/s00226-003-0216-2
Fang L, Catchmark JM (2014) Structure characterization of native cellulose during dehydration and rehydration. Cellulose 21(6):3951–3963. https://doi.org/10.1007/s10570-014-0435-8
French AD (2014) Idealized powder diffraction patterns for cellulose polymorphs. Cellulose 21(2):885–896. https://doi.org/10.1007/s10570-013-0030-4
Garg M, Singh SP (2006) Reasons of strength loss in recycled pulp. Appita J 59(4):274–279. https://doi.org/10.3316/informit.530256503279021
Georget DM, Ng A, Smith AC, Waldron KW (1999) Thermal characterisation of oxidatively cross-linked American corn bran hemicellulose. J Sci Food Agric 79(3):481–483. https://doi.org/10.1002/(SICI)1097-0010(19990301)79:3%3c481::AID-JSFA267%3e3.0.CO;2-3
Hubbe MA, Venditti RA, Rojas OJ (2007) What happens to cellilosic fibers during papermaking and recycling? a review. BioResources 2(4):739–788
Irvine GM (1984) The glass transitions of lignin and hemicellulose and their measurement by differential thermal analysis. Tappi J 67(5):118–121
Irvine GM (1985) The significance of the glass transition of lignin in thermomechanical pulping. Wood Sci Technol 19(2):139–149
Jayme G (1944) Micro-swelling measurement in cellulosic pulp. Papier-Fabr/wochenbl Papierfabr 6:187–194
Khalloufi S, Kharaghani A, Almeida-Rivera C, Nijsse J, van Dalen G, Tsotsas E (2015) Monitoring of initial porosity and new pores formation during drying: a scientific debate and a technical challenge. Trends Food Sci Technol 45(2):179–186. https://doi.org/10.1016/j.tifs.2015.06.011
Langan P, Petridis L, O’Neill HM, Pingali SV, Foston M, Nishiyama Y, Schulz R, Lindner B, Hanson BL, Harton S, Heller WT, Urban V, Evans BR, Gnanakaran S, Ragauskas AJ, Smith JC, Davison BH (2014) Common processes drive the thermochemical pretreatment of lignocellulosic biomass. Green Chem 16(1):63–68. https://doi.org/10.1039/C3GC41962B
Liu W, Liu K, Du H, Zheng T, Zhang N, Xu T, Pang B, Zhang X, Si C, Zhang K (2022) Cellulose nanopaper: fabrication, functionalization, and applications. Nanomicro Lett 14(1):104. https://doi.org/10.1007/s40820-022-00849-x
Mo W, Li B, Li Y, Li Y, Wu S (2019) Overcoming the drying-induced pore closure of APMP poplar fibers in old newsprint by surfactant treatment to promote enzymatic hydrolysis of the cellulose. Cellulose 26(9):5529–5541. https://doi.org/10.1007/s10570-019-02471-4
Mo W, Ke K, Shen X, Li B (2020) The influence of “thermal drying pretreatment” on enzymatic hydrolysis of cellulose and xylan in poplar fibers with high lignin content. Carbohydr Polym 228:115400. https://doi.org/10.1016/j.carbpol.2019.115400
Mo W, Li B, Chai X (2020b) Impact of fiber initial water content on the water retention capacity of poplar APMP fibers during the thermal drying. Wood Sci Technol 54(1):227–235. https://doi.org/10.1007/s00226-019-01148-2
Mo W, Chen K, Yang X, Kong F, Liu J, Li B (2022) Elucidating the hornification mechanism of cellulosic fibers during the process of thermal drying. Carbohydr Polym 289:119434. https://doi.org/10.1016/j.carbpol.2022.119434
Mo W, Li B, Liu J, Kong F, Chen K (2022b) Short-term thermal drying-induced pore expansion effects of cellulosic fibers and its applications. Cellulose. https://doi.org/10.1007/s10570-022-04882-2
Mo W, Kong F, Chen K, Li B (2022c) Relationship between freeze-drying and supercritical drying of cellulosic fibers with different moisture contents based on pore and crystallinity measurements. Wood Sci Technol 56(3):867–882. https://doi.org/10.1007/s00226-022-01387-w
Pingali SV, O’Neill HM, NishiyamaHeMelnichenkoUrbanPetridisDavisonLangan YLYBVLBP (2014) Morphological changes in the cellulose and lignin components of biomass occur at different stages during steam pretreatment. Cellulose 21(2):873–878. https://doi.org/10.1007/s10570-013-0162-6
Pino MS, Rodríguez-Jasso RM, Michelin M, Ruiz HA (2019) Enhancement and modeling of enzymatic hydrolysis on cellulose from agave bagasse hydrothermally pretreated in a horizontal bioreactor. Carbohydr Polym 211:349–359. https://doi.org/10.1016/j.carbpol.2019.01.111
Pönni R, Vuorinen T, Kontturi E (2012) Proposed nano-scale coalescence of cellulose in chemical pulp fibers during technical treatments. Bioresources 7(4):6077–6108. https://doi.org/10.15376/biores.7.4.6077-6108
Posada P, Velásquez-Cock J, Gómez-Hoyos C, Serpa Guerra AM, Lyulin SV, Kenny JM, Gañán P, Castro C, Zuluaga R (2020) Drying and redispersion of plant cellulose nanofibers for industrial applications: a review. Cellulose 27(18):10649–10670. https://doi.org/10.1007/s10570-020-03348-7
Segal L, Creely JJ, Martin AE Jr, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29(10):786–794
Sluiter A, Hames B, Ruiz R, Scarlata C, Sluiter J, Templeton D, Crocker D (2008) Determination of structural carbohydrates and lignin in biomass. Lab Anal Proced 1617(1):1–16
Szcześniak L, Rachocki A, Tritt-Goc J (2008) Glass transition temperature and thermal decomposition of cellulose powder. Cellulose 15(3):445–451. https://doi.org/10.1007/s10570-007-9192-2
Toba K, Yamamoto H, Yoshida M (2012) Mechanical interaction between cellulose microfibrils and matrix substances in wood cell walls induced by repeated wet-and-dry treatment. Cellulose 19(4):1405–1412. https://doi.org/10.1007/s10570-012-9700-x
Toba K, Yamamoto H, Yoshida M (2013) Crystallization of cellulose microfibrils in wood cell wall by repeated dry-and-wet treatment, using X-ray diffraction technique. Cellulose 20(2):633–643. https://doi.org/10.1007/s10570-012-9853-7
Vural D, Gainaru C, O’Neill H, Pu Y, Smith MD, Parks JM, Pingali SV, Mamontov E, Davison BH, Sokolov AP, Ragauskas AJ, Smith JC, Petridis L (2018) Impact of hydration and temperature history on the structure and dynamics of lignin. Green Chem 20(7):1602–1611. https://doi.org/10.1039/C7GC03796A
Wan J, Wang Y, Xiao Q (2010) Effects of hemicellulose removal on cellulose fiber structure and recycling characteristics of eucalyptus pulp. Bioresour Technol 101(12):4577–4583. https://doi.org/10.1016/j.biortech.2010.01.026
Funding
This work was supported by Natural Science Foundation of Guangdong Province [Grant Number 2021A1515011012]; R&D projects in key areas of Guangdong Province [Grant Number 2022B1111080004]; High Performance Servo System Enterprise Key Laboratory of Guangdong [Grant Number HPSKL2022KT01].
Author information
Authors and Affiliations
Contributions
All authors contributed to the study conception and design. Material preparation, data collection and analysis were performed by WM. The first draft of the manuscript was written by WM and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Conflict of interest
There are no conflicts of interest to declare.
Ethical approval
This manuscript has not been published or presented elsewhere in part or in entirety and is not under consideration by another journal. The authors also confirm that they have prepared the manuscript in compliance with the Ethics in Publishing Policy as described in the Guide for Authors.
Consent for publication
All authors have approved the manuscript and agree with submission to this journal.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Mo, W., Li, B. & Chen, K. Low-temperature thermal drying-induced pore expansion effects of cellulosic fibers. Cellulose 30, 3441–3453 (2023). https://doi.org/10.1007/s10570-023-05103-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-023-05103-0