Abstract
The effects of interphase between fibers and matrix on the micro-and macro-mechanical behaviors of fiber-reinforced composite lamina subjected to transverse shear load at remote distance have been studied. The interphase has been modeled by the compliant spring-layers that are linearly related to the normal and tangential tractions. Numerical analyses on composite basic cells have been carried out using the boundary element method. For undamaged composites the micro-level stresses at the matrix side of the interphase and effective shear modulus have been calculated as a function of the fiber volume fraction and the interphase stiffness. Results are presented for various interphase stiffnesses from perfect bonding to total debonding. For a square array composite results show that for a high interphase stiffness k > 10, an increase in a fiber volume fraction results in a higher effective transverse shear modulus. For a relatively low interphase stiffness k < 1, it is shown that an increase in the fiber volume fraction causes a decrease in the effective transverse shear modulus. For perfect bonding, the effective shear modulus for a hexagonal array composite is slightly larger than that for a square array composite. Also for the damaged composite with partially debonded interphase, local stress fields and effective shear moduli are calculated and a decrease in the effective shear modulus has been observed.
Similar content being viewed by others
References
Adams, D.F., Doner, D.R.: Transverse normal loading of a unidirectional composite. J. Compos. Mater. 1, 152–164 (1967)
Chen, P.E., Lin, J.M.: Transverse properties of fibrous composites. Mater. Res. Stand. 29–32 (1969)
Christensen, R.M., Lo, K.H.: Solutions for effective shear properties in three phase sphere and cylinder models. J. Mech. Phys. Solids 27, 315–330 (1979)
Takahashi, K., Chou, T.W.: Transverse elastic moduli of unidirectional fiber composites with interfacial debonding. Metall. Trans. A. 19A, 129–135 (1988)
Highsmith, A.L., Shin, D., Naik, R.A.: Local stresses in metal matrix composites subjected to thermal and mechanical loading. ASTM STP 1080, 3–19 (1990)
Gosz, M., Moran, B., Achenbach, J.D.: Effect of viscoelastic interface on the transverse behavior of fiber-reinforced composites. Int. J. Solids and Struct. 27(11), 1757–1771 (1991)
de Kok, J.M.M., van Klinken, E.J., Peijs, A.A.J.M.: Influence of fiber surface treatment on the transverse properties of carbon fiber reinforced composite. Advanced Composites ’93 Int. Conf. Adv. Compos. Mater. 427–432 (1993)
Achenbach, J.D., Zhu, H.: Effect of interfacial zone on mechanical behavior and failure of fiber-reinforced composites. J. Mech. Phys. Solids. 37(3), 381–393 (1989)
Achenbach, J.D., Choi, H.S.: Matrix cracking and interphase failure in fiber composites. Local Mechanics Concepts for Composite Material Systems, IUTAM Symposium Blacksburg, VA 1991, Springer-Verlag, 149–163 (1992)
Choi, H.S., Achenbach, J.D.: Stress state at neighboring fibers induced by single-fiber interphase defects. Int. J. Solids and Struct. 32(11), 1555–1570 (1995)
Choi, H.S., Achenbach, J.D., Kim, C.: Micromechanical bilinear behavior of composite lamina subjected to combined thermal and mechanical loadings. Mech. of Composite Mater. Struct. 8(2), 135–156 (2001)
Laird II, G., Kennedy, T.C.: Poisson’s ratio and the interfacial behavior of composite materials. Compos. 26, 887–889 (1995)
Chen, H.R., Su, X.F., Williams, F.W.: Effects of imperfect interphase on overall average mechanical properties and local stress fields of multiphase composite materials. Compos. 26(5), 347–353 (1995)
Liu, Y.J., Xu, N., Luo, J.F.: Modeling of interphases in fiber transverse loading using boundary element method. J. Appl. Mech. 67, 41–49 (2000)
Liu, Y.J., Xu, N.: Modeling of interface cracks in fiber-reinforced composites with the presence of interphases using the boundary element method. Mech. Mater. 32(12), 769–783 (2000)
Goldberg, R.K., Steven, M.A.: A study of influencing factors on the tensile response of a Titanium matrix composite with weak interfacial bonding, NASA/TM-2000-209798 (2000)
Williams, M.L.: The stresses around a fault or crack in dissimilar media. Bull. Seismol. Soc. America 49, 199–204 (1959)
Brebbia, C.A., Dominguez, J.: Boundary elements; an introductory course. McGraw-Hill Book Co., New York (1994)
Kane, J.H.: Boundary element analysis in engineering continuum mechanics. Prentice-Hall, Inc., New Jersey (1994)
Hashin, Z.: Analysis of properties of fiber composites with anisotropic constituents. J. Appl. Mech. 46(3), 543–550 (1979)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Choi, H.S., Jang, Y.H. Micro-Mechanical Behavior of a Unidirectional Composite Subjected to Transverse Shear Loading. Appl Compos Mater 18, 127–148 (2011). https://doi.org/10.1007/s10443-010-9136-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10443-010-9136-0