Avoid common mistakes on your manuscript.
Correction: Microfluidics and Nanofluidics (2024) 28:18 https://doi.org/10.1007/s10404-024-02716-0
In this article the wrong figure appeared as Fig. 1; the Fig. 1 should have appeared as shown below.
a Optical microscopy image of cryo-grinded and mesh sieved randomly shaped PE MPs and PP MPs, and b specifcations of PDMS microfuidic trap module fabrication by photolithography using SU-8 master fabrication
The original article has been corrected.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Shin, S., Jeon, B., Kang, W. et al. Correction: Characterization of microfluidic trap and mixer module for rapid fluorescent tagging of microplastics. Microfluid Nanofluid 28, 37 (2024). https://doi.org/10.1007/s10404-024-02731-1
Published:
DOI: https://doi.org/10.1007/s10404-024-02731-1