Abstract
The measurement of the sustainability level can bring benefits to organizations, particularly in integrating traditional and sustainable management. Thus, the scope of this study is to structure a process to measure the sustainability level, specifically in micro- and small-sized enterprises that belong to the furniture industry, providing them the possibility to measure and monitor their sustainability level through indicators, subindices and a sustainability index. Currently, there is no system for measuring the level of sustainability and its integration in the management of furniture industries. Thus, the system proposed in this article can be considered unprecedented. This measurement system comprises the equations of measurement, standardization, weighting and aggregation of indicators in a sustainability index. The practical application was carried out in nine furniture industries. The results demonstrate that the indicators, subindices and index of sustainability are adequate to diagnose their sustainability level, revealing negligence with environmental aspects. Our conclusion is that the proposed method to measure the sustainability level of micro- and small-sized industries is consistent and reflects the reality of the furniture industry. Furthermore, its efficient use should consider a joint analysis of indicators and subindices. Finally, its integration with the management process of the industries enables a diagnosis, without additional information efforts, of the strengths and weaknesses of environmental, social and economic aspects.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
ABTD (2015) Brazilian Association of Training and Development. http://portal.abtd.com.br/Portal/default.aspx. Accessed 29 Feb 2016
Aragón-Correa JA, Hurtado-Torres N, Sharma S, Garcia-Morales VJ (2008) Environmental strategy and performance in small firms: a resource-based perspective. J Environ Manag 86:88–103. doi:10.1016/j.jenvman.2006.11.022
Azapagic A (2004) Developing a framework for sustainable development indicators for the mining and minerals industry. J Clean Prod 12:639–662. doi:10.1016/S0959-6526(03)00075-1
Azapagic A, Perdan S (2000) Indicators of sustainable development for industry: a general framework. Process Saf Environ Prot 78:243–261. doi:10.1205/095758200530763
Barter N, Russell S (2012) Sustainable development: 1987 to 2012-don’t be naive, it’s not about the environment. 11th Australasian conference on social and environmental accounting research (A-CSEAR) proceedings, University of Wollongong, Wollongong, Australia
Bell S, Morse S (2008) Sustainability indicators: measuring the immeasurable?. Earthscan Publication, London. doi:10.1111/j.1477-8947.2008.209_4.x
Blancas FJ, González M, Lozano-Oyola M, Perez F (2010) The assessment of sustainable tourism: application to Spanish coastal destinations. Ecol Ind 10:484–492. doi:10.1016/j.ecolind.2009.08.001
Blewitt J (2008) Understanding sustainable development. Earthscan, London. doi:10.4324/9781849773645
Borga F, Citterio A, Noci G, Pizzurno E (2009) Sustainability report in small enterprises: case studies in Italian furniture companies. Bus Strategy Environ 18:162–176. doi:10.1002/bse.561
Bork CAS, Souza JF, Oliveira Gomes J, Canhete VVP, Barba DJ (2016) Methodological tools for assessing the sustainability index (SI) of industrial production processes. Int J Adv Manuf Technol 87:1313. doi:10.1007/s00170-014-6684-8
Boulanger PM (2008) Sustainable development indicators: a scientific challenge, a democratic issue. Surv Perspect Integr Environ Soc 1:59–73
Calogirou C, Sørensen SY, Bjørn Larsen P, Alexopoulou S (2010) SMEs and the environment in the European Union. PLANET SA and Danish Technological Institute, Published by European Commission, DG Enterprise and Industry. Greece file:///C:/Users/User/Downloads/case_collection_annex.pdf. Accessed 25 Mar 2016
Chen D, Thiede S, Schudeleit T, Herrmann C (2014) A holistic and rapid sustainability assessment tool for manufacturing SMEs. CIRP Ann Manuf Technol 63:437–440. doi:10.1016/j.cirp.2014.03.113
Chu HC, Hwang GJ (2007) A Delphi-based approach to developing expert systems with the cooperation of multiple experts. Expert Syst Appl Int J 34:2826–2840. doi:10.1016/j.eswa.2007.05.034
De Silva TA, Forbes SL (2016) Sustainability in the New Zealand horticulture industry. J Clean Prod 112:2381–2391. doi:10.1016/j.jclepro.2015.10.078
Despeisse M, Oates MR, Ball PD (2013) Sustainable manufacturing tactics and cross-functional factory modelling. J Clean Prod 42:31–41. doi:10.1016/j.jclepro.2012.11.008
Ebert U, Welsch H (2004) Meaningful environmental indices: a social choice approach. J Environ Econ Manag 47:270–283. doi:10.1016/j.jeem.2003.09.001
Elkington J (1997) Cannibals with forks: the triple bottom line of 21st century business. Capstone Publishing, Oxford
Erol I, Cakar N, Erel D, Sari R (2009) Sustainability in the Turkish retailing industry. Sustain Dev 17:49–67. doi:10.1002/sd.369
Feil AA, De Quevedo DM, Schreiber D (2015) Selection and identification of the indicators for quickly measuring sustainability in micro and small furniture industries. Sustain Prod Consum 3:34–44. doi:10.1016/j.spc.2015.08.006
Ferreira MJB, Gorayeb D, Araújo RD, Mello C, Boeira JLF (2008) Sector monitoring report, furniture industry. Unicamp, ABDI, 1,Campinas. https://www3.eco.unicamp.br/neit/images/stories/arquivos/RelatorioABDI/moveleira_vol-I_junho2008.pdf. Accessed 10 May 2016
Freudenberg M (2003) Composite indicators of country performance: a critical assessment. In: OECD Science, Technology and Industry Working Papers, 2003/16, OECD Publishing. doi: 10.1787/405566708255
Gabiati J, Deimling MF, Barichello R (2014) Performance indicators: a study on the furniture sector of the west of Santa Catarina. In: International congress of administration, Anais do ADMPG 10:1–12
Galinari R, Júnior T, Rodrigues J, Morgado RR (2013) The competitiveness of the Brazilian furniture industry: current situation and perspectives. BNDES Setorial 37:227–272
Grael PFF, Oliveira OJ (2010) Systems which can be certified for environmental management and quality: practices for integration into companies in the furniture sector. Production 20:30–41
GRI (2006) Sustainability reporting guidelines, Version 3.0. GRI, Amsterdam. https://www.globalreporting.org/resourcelibrary/G3-Guidelines-Incl-Technical-Protocol.pdf. Accessed 15 June 2016
Hart M (2006) Guide to sustainable community indicators. In: CT: sustainable measures, 2nd edn. West Hartford
Helleno AL, Moraes AJI, Simon AT (2016) Integrating sustainability indicators and Lean Manufacturing to assess manufacturing processes: application case studies in Brazilian industry. J Clean Prod 153:1–12. doi:10.1016/j.jclepro.2016.12.072
Herva M, Franco A, Carrasco EF, Roca E (2011) Review of corporate environmental indicators. J Clean Prod 19:1687–1699. doi:10.1016/j.jclepro.2011.05.019
Herzig C, Schaltegger S (2006) Corporate sustainability reporting: an overview. In: Schaltegger S, Bennett M, Burritt RL (eds) sustainability accounting and reporting. Springer, Dordrecht, pp 301–324. doi:10.1007/978-1-4020-4974-3_13
IBGE (2015) Brazilian Institute of Geography and Statistics. http://www.ibge.gov.br/home/estatistica/economia/comercioeservico/pas/analisepas99.shtm. Accessed 2 Feb 2016
IChemE (2002) The sustainability metrics: sustainable development progress metrics recommended for use in the process industries. Rugby: Institution of Chemical Engineers. http://nbis.org/nbisresources/metrics/triple_bottom_line_indicators_process_industries.pdf. Accessed 12 Feb 2016
Jacobs RP, Smith M, Goddard MK (2004) Measuring performance: an examination of composite performance indicators: a report for the Department of Health, Centre of Health Economics, University of York. https://www.york.ac.uk/che/pdf/tp29.pdf. Accessed 23 Apr 2016
Joung CB, Carrell J, Sarkar P, Feng SC (2013) Categorization of indicators for sustainable manufacturing. Ecol Ind 24:148–157. doi:10.1016/j.ecolind.2012.05.030
Krajnc D, Glavic P (2003) Indicators of sustainable production. Clean Technol Environ Policy 5:279–288. doi:10.1016/S0959-6526(01)00004-X
Krajnc D, Glavic P (2005) A model for integrated assessment of sustainable development. Resour Conserv Recycl 43:189–208. doi:10.1016/j.resconrec.2004.06.002
Laurinkevičiūtė A, Stasiškienė Ž (2011) SMS for decision making of SMEs. Clean Technol Environ Policy 13:797–807. doi:10.1007/s10098-011-0349-1
Lee Y, Huang C (2007) Sustainability index for Taipei. Environ Impact Assess Rev 27:505–521. doi:10.1016/j.eiar.2006.12.005
Li T, Zhang H, Yuan C, Liu Z, Fan C (2012) A PCA-based method for construction of composite sustainability indicators. Int J Life Cycle Assess 17:593–603. doi:10.1007/s11367-012-0394-y
Lima EG, Silva DA (2005) Waste genereted in wood furniture industries at the city of Arapongas Brazil. Floresta 35:105–116. doi:10.1590/S1413-70542009000700008
Lindholm O, Greatorex JM, Paruch AM (2007) Comparison of methods for calculation of sustainability indices for alternative sewerage systems: theoretical and practical considerations. Ecol Ind 7:71–78. doi:10.1016/j.ecolind.2005.10.002
Linke BS, Corman GJ, Dornfeld DA, Tönissen S (2013) Sustainability indicators for discrete manufacturing processes applied to grinding technology. J Manuf Syst 32:556–563. doi:10.1016/j.jmsy.2013.05.005
Liu G (2014) Development of a general sustainability indicator for renewable energy systems: a review. Renew Sustain Energy Rev 31:611–621. doi:10.1016/j.rser.2013.12.038
Long Y, Pan J, Farooq S, Boer H (2016) A sustainability assessment system for Chinese iron and steel firms. J Clean Prod 125:133–144. doi:10.1016/j.jclepro.2016.03.030
Lopes CSD, Azevedo PS (2014) Environmental requirements for furniture industry: the case study of Brazilian Southeast industry. Environ Dev Sustain 16:1013–1029. doi:10.1007/s10668-013-9508-3
Malkina-Pykh IG (2002) Integrated assessment models and response function models: pros and cons for sustainable development indices design. Ecol Ind 2:93–108. doi:10.1016/S1470-160X(02)00048-1
Martins AB, Medeiros GA, Mancini SD, Rosa AH (2012) Diagnosis of the environmental management of the furniture industries of Itatiba - São Paulo. III Brazilian Congress of Environmental Management Goiânia – Goiânia. http://www.ibeas.org.br/congresso/Trabalhos2012/II-005.pdf. Accessed 17 June 2016
Massote CHR, Santi AM (2012) Implementation of a cleaner production program in a Brazilian wooden furniture factory. J Clean Prod 46:89–97. doi:10.1016/j.jclepro.2012.09.004
Mayer AL (2008) Strengths and weakness of common sustainability indices for multidimensional systems. Environ Int 34:277–291. doi:10.1016/j.envint.2007.09.004
Mckeiver C, Gadenne D (2005) Environmental management systems in small and medium businesses. Int Small Bus J 23:513–537. doi:10.1177/0266242605055910
Mikulic J, Kožić I, Krešić D (2015) Weighting indicators of tourism sustainability: a critical note. Ecol Ind 48:312–314. doi:10.1016/j.ecolind.2014.08.026
Moldan B, Janoušková S, Hák T (2012) How to understand and measure environmental sustainability: indicators and targets. Ecol Ind 17:4–13. doi:10.1016/j.ecolind.2011.04.033
Mori K, Christodoulou A (2012) Review of sustainability indices and indicators: towards a new city sustainability index (CSI). Environ Impact Assess Rev 32:94–106. doi:10.1016/j.eiar.2011.06.001
Movergs (2015) Association of furniture industries of the state of Rio Grande do Sul. http://www.movergs.com.br/dados-setor-moveleiro. Accessed 05 Apr 2016
Naime R, Selbach E (2014) Diagnosis of sustainability in the furniture industry RS: a case study in factory in the Cai Valley. Revista Eletrônica em Gestão, Educação e Tecnologia Ambiental 18:312–328. doi:10.5902/2236117012292
OECD—Organization for Economic Co-operation and Development (2008) Handbook on constructing composite indicators: methodology and user guide. http://www.oecd.org/els/soc/handbookonconstructingcompo siteindicatorsmethodologyanduserguide.htm. Accessed 13 Mar 2016
Patlitzianas KD, Doukas H, Kagiannas AG, Psarras J (2008) Sustainable energy policy indicators: review and recommendations. Renew Energy 33:966–973. doi:10.1016/j.renene.2007.05.003
Pérez V, Guerrero F, González M, Pérez F, Caballero R (2013) Composite indicator for the assessment of sustainability: the case of Cuban nature-based tourism destinations. Ecol Ind 29:316–324. doi:10.1016/j.ecolind.2012.12.027
Plouffe S, Lanoie P, Berneman C, Marie-France Vernier MF (2011) Economic benefits tied to ecodesign. J Clean Prod 19:573–579. doi:10.1016/j.jclepro.2010.12.003
Portal Industria (2014) Industrial cost indicators. http://arquivos.portaldaindustria.com.br/app/ cni_estatistica_2/2016/03/28/34/IndicadordeCustosIndustriais_Outubro-Dezembro2014.pdf. Accessed 17 Mar 2007
Pullman ME, Maloni MJ, Carter CR (2009) Food for thought: social versus environmental sustainability practices and performance outcomes. J Supply Chain Manag 45:38–54. doi:10.1111/j.1745-493X.2009.03175.x
Rais (2013) Annual report of social information. http://portal.mte.gov.br/rais/. Accessed 20 Aug 2016
Redmond J, Walker E, Wang C (2008) Issues for small businesses with waste management. J Environ Manag 88:275–285. doi:10.1016/j.jenvman.2007.02.006
Reisi M, Aye L, Rajabifard A, Ngo T (2014) Transport sustainability index: Melbourne case study. Ecol Ind 43:288–296. doi:10.1016/j.jenvman.2007.02.006
Romero JC, Linares P (2014) Exergy as a global energy sustainability indicator. A review of the state of the art. Renew Sustain Energy Rev 33:427–442. doi:10.1016/j.rser.2014.02.012
Sebrae (2015) Brazilian service of support to micro and small enterprises. http://www.sebrae.com.br/Sebrae/Portal%20Sebrae/ Estudos%20e%20Pesquisas/Participacao%20das%20 micro%20e%20pequenas%20empresas.pdf. Accessed 02 Feb 2016
Sellitto MA, Rossatto JP, Luzzi I, Pereira GM, Borchardt M (2014) Descriptive analysis of factors influencing economic results in the furniture cluster of Bento Gonçalves. Revista Produção Online 14:1192–1215. doi:10.14488/1676-1901.v14i4.1329
Seuring SA, Koplin J, Behrens T, Schneidewind U (2003) Sustainability assessment in the German detergent industry: from stakeholder involvement to sustainability indicators. Sustain Dev 11:199–212. doi:10.1002/sd.216
Sindmoveis (2014) Billing of the furniture pole. http://www.sindmoveis.com.br/portal/imprensa/noticias/ faturamento-do-polo-moveleiro-teve-queda-de-94-em-2014. Accessed 21 Feb 2016
Sindmóveis (2015) Regional data of the furniture sector. http://www.sindmoveis.com.br/portal/downloads/ dados-setor/. Accessed 15 Aug 2016
Sindmóveis (2016) Relation of furniture industries. http://www.sindmoveis.com.br/portal/empresas/busca/. Accessed 15 Jan 2016
Singh R, Murty H, Gupta S, Dikshit A (2007) Development of composite sustainability performance index for steel industry. Ecol Indic 7:565–588. doi:10.1016/j.ecolind.2006.06.004
Singh RK, Murty HR, Gupta SK, Dikshit AK (2012) An overview of sustainability assessment methodologies. Ecol Ind 15:281–299. doi:10.1016/j.ecolind.2011.01.007
Singh S, Olugu EU, Musa SN (2016) Development of sustainable manufacturing performance evaluation expert system for small and medium enterprises. Procedia CIRP 40:608–613. doi:10.1016/j.procir.2016.01.142
Tan HX, Yeo Z, Ng R, Tjandra TB, Song B (2015) A sustainability indicator framework for Singapore small and medium-sized manufacturing enterprises. Procedia CIRP 29:132–137. doi:10.1016/j.procir.2015.01.028
Tokos H, Pintarič ZN, Krajnc D (2012) An integrated sustainability performance assessment and benchmarking of breweries. Clean Technol Environ Policy 14:173–193. doi:10.1007/s10098-011-0390-0
Tomazi NS, Moura H, Giuliano CP (2014) Design and sustainability in the Brazilian furniture industry. XI Week of Extension, Research and Post-Graduation - SEPesq University Center Ritter dos Reis. Porto Alegre, Brazil
UNIDO—United Nations Industrial Development Organization (2011) UNIDO green industry. Policy for supporting green industry. UNIDO, Vienna
WCED—World Commission on Environment and Development (1987) Our common future. Oxford University Press, Oxford
Zhou P, Ang BW, Poh KL (2006) Comparing aggregating methods for constructing the composite environmental index: an objective measure. Ecol Econ 59:305–311. doi:10.1016/j.ecolecon.2005.10.018
Zhou L, Tokos H, Krajnc D, Yang Y (2012) Sustainability performance evaluation in industry by composite sustainability index. Clean Technol Environ Policy 14:789–803. doi:10.1007/s10098-012-0454-9
Author information
Authors and Affiliations
Corresponding author
Appendix
Rights and permissions
About this article
Cite this article
Feil, A.A., de Quevedo, D.M. & Schreiber, D. An analysis of the sustainability index of micro- and small-sized furniture industries. Clean Techn Environ Policy 19, 1883–1896 (2017). https://doi.org/10.1007/s10098-017-1372-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10098-017-1372-7